New Configuration Commands in Cisco NX-OS Release 9.2(2)
The following commands are added in this release.
-
[ no ] count <cap-count>
-
[ no ] drop-trigger { ingress-admission | egress-admission | wred }
-
[ no ] eapol mac-address { <mac_addr> | broadcast-address } [ ethertype <eth_type> ]
-
[ no ] exporter <exportername> [ collector-bucket-id <cb-id> ]
-
[ no ] feature signature-verification
-
[ no ] hardware profile packet-drop
-
[ no ] hardware profile statistics pstat [ peak ]
-
[ no ] hardware qos dynamic-buffer-sharing
-
[ no ] hardware qos fc rate-shaper [ low ]
-
[ no ] hardware-telemetry postcard-telemetry
-
[ no ] include-icv-indicator
-
[ no ] interface <if_list> { [ qos-group <ucastqos-grp> ] }
-
[ no ] ip pim evpn-border-leaf
-
[ no ] macsec shutdown
-
[ no ] object-track <object-number> [ decrement <value> ]
-
[ no ] postcard-telemetry exporter <exportername>
-
[ no ] postcard-telemetry flow-profile
-
[ no ] postcard-telemetry monitor <monitorname>
-
[ no ] postcard-telemetry queue-profile <queue_profilename>
-
[ no ] postcard-telemetry system monitor <monitorname>
-
[ no ] postcard-telemetry watchlist ip <watchlistname>
-
[ no ] priority-flow-control watch-dog forced { on | off }
-
[ no ] profile <profile-name>
-
[ no ] sampling-rate { pre-trigger <pre-sample-rate> } { post-trigger <post-sample-rate> }
-
[ no ] service-policy-dynamic input <policy_name>
-
[ no ] source { { unicast-queue interface <if_list> qos-group <qos-grp> } | { { ingress | egress } { interface <if_list> } } }
-
[ no ] start-threshold <start-threshold-rate>
-
[ no ] stop-threshold <stop-threshold-rate>
-
[ no ] system security compliance common-criteria
-
[ no ] timer <cap-timer-usec>
-
[ no | default ] advertise local-labeled-route
-
clear hardware profile packet-drop file_instance
-
clear ip nat-alias { address <ipaddress> | all }
-
configure replace abort
-
control-plane dynamic
-
dot1x mac-move <value> | no dot1x mac-move <value>
-
link rxlos [ algo <algo_val> ] | no link rxlos [ algo <algo_val> ]
-
no system vlan nve-overlay id [ <vrange> ] | system vlan nve-overlay id <vrange>
-
port-channel scale-fanout | no port-channel scale-fanout
-
system no poap
-
system poap
-
system simulate fan-presence | no system simulate fan-presence
-
timestamp { ingress id <ingress-source-id> | egress id <egress-source-id> } | timestamp { ingress id <ingress-source-id> egress id <egress-source-id> } | no timestamp
-
write erase poap
-
{ hardware profile tcam mcast racl-bridge } | { no hardware profile tcam mcast racl-bridge }
-
{ ssh { idle-timeout <i0> } [ keepalive-count <i1> ] | no ssh idle-timeout }
-
{ { no kstack multicast-udp } | { kstack multicast-udp { enable | disable } } }
-
| validate-json