Cisco Nexus 9000 Series NX-OS Command Reference (Configuration Commands), Release 9.2(x)

Bias-Free Language

The documentation set for this product strives to use bias-free language. For the purposes of this documentation set, bias-free is defined as language that does not imply discrimination based on age, disability, gender, racial identity, ethnic identity, sexual orientation, socioeconomic status, and intersectionality. Exceptions may be present in the documentation due to language that is hardcoded in the user interfaces of the product software, language used based on RFP documentation, or language that is used by a referenced third-party product. Learn more about how Cisco is using Inclusive Language.

Book Contents
Find Matches in This Book
Available Languages
Download Options

Book Title

Cisco Nexus 9000 Series NX-OS Command Reference (Configuration Commands), Release 9.2(x)

Chapter Title

F Commands

Results

Updated:
August 30, 2019

Chapter: F Commands

F Commands

fabric-soo

[no] fabric-soo { <ext-comm-soo-aa2nn4> | <ext-comm-soo-aa4nn2> }

Syntax Description

no

(Optional) Negate a command or set its defaults

fabric-soo

Fabric Site of Origin

ext-comm-soo-aa4nn2

VPN extcommunity in aa4:fabric_id format

ext-comm-soo-aa2nn4

VPN extcommunity in aa:fabric_id format

Command Mode

  • /exec/configure/router-bgp

fabric database auto-pull dci node-id

fabric database auto-pull dci node-id <mgmt-ip-address>

Syntax Description

fabric

Fabric

database

Fabric Database

auto-pull

Pull configuration

dci

DCI profile

node-id

management ip address of this node

mgmt-ip-address

IP address in CIDR format

Command Mode

  • /exec

fabric database auto-pull dci vrf node-id

fabric database auto-pull dci vrf <vrf-name> node-id <mgmt-ip-address> [ peer-id <peer-ip-address> ]

Syntax Description

fabric

Fabric

database

Fabric Database

auto-pull

Pull configuration

dci

DCI profile

vrf

Display per-VRF information

vrf-name

VRF name

node-id

management ip address of this node

mgmt-ip-address

IP address in CIDR format

peer-id

(Optional) management ip address of peer

peer-ip-address

(Optional) IP address in CIDR format

Command Mode

  • /exec

fabric database auto-pull vni interface

fabric database auto-pull { vni <vni-id> | dot1q <vlan-id> } interface <interface-id> [ { overwrite-vlan | overwrite-bd } <ow-vlan-id> ]

Syntax Description

fabric

Fabric

database

Fabric Database

auto-pull

Pull configuration

vni

Pull ethernet-tag vni configuration

vni-id

dot1q

Pull ethernet-tag dot1q configuration

vlan-id

interface

Applied interface

interface-id

Name of interface

overwrite-vlan

(Optional) Overwrite the system generate vlan

overwrite-bd

(Optional) Overwrite the system generate bd

ow-vlan-id

(Optional)

Command Mode

  • /exec

fabric database inherit-profile-map

{ fabric database inherit-profile-map <id> } | { no fabric database inherit-profile-map }

Syntax Description

no

Negate a command or set its defaults

fabric

Fabric

database

Configure Fabric Database

inherit-profile-map

Inherit a profile map. All non-global mappings will be inherited.

id

Profile Map ID

Command Mode

  • /exec/configure/if-eth-any /exec/configure/if-port-channel

fabric database mobility-domain

[no] fabric database mobility-domain <name>

Syntax Description

no

(Optional) Negate a command or set its defaults

fabric

Fabric

database

Configure Fabric Database

mobility-domain

Tag to identify mobility domain name

name

Mobility Domain Name

Command Mode

  • /exec/configure

fabric database override-profile

[no] fabric database override-profile <profilename>

Syntax Description

no

(Optional) Negate a command or set its defaults

fabric

Fabric

database

Configure Fabric Database

override-profile

Override the network profile name

profilename

Enter the profile name to override network profile

Command Mode

  • /exec/configure

fabric database override-vrf-profile

[no] fabric database override-vrf-profile <profilename>

Syntax Description

no

(Optional) Negate a command or set its defaults

fabric

Fabric

database

Configure Fabric Database

override-vrf-profile

Override the VRF (partition) profile name

profilename

Enter the profile name to override VRF profile

Command Mode

  • /exec/configure

fabric database profile-map

[no] fabric database profile-map <id>

Syntax Description

no

(Optional) Negate a command or set its defaults

fabric

Fabric

database

Configure Fabric Database

profile-map

Configure a profile map

id

Profile Map ID

Command Mode

  • /exec/configure

fabric database profile-map global

[no] fabric database profile-map global

Syntax Description

no

(Optional) Negate a command or set its defaults

fabric

Fabric

database

Configure Fabric Database

profile-map

Configure a profile map

global

Global profile (apply to all interfaces)

Command Mode

  • /exec/configure

fabric database refresh dot1q

fabric database refresh dot1q <vlan-id> [ { mobility-domain <name> | interface <interface-id> } ]

Syntax Description

fabric

Fabric

database

Fabric Database

refresh

Refresh profile configuration

dot1q

Dot1Q Encapsulation

vlan-id

interface

(Optional) Applied interface

interface-id

(Optional) Name of interface

mobility-domain

(Optional) Tag to identify mobility domain name

name

(Optional) Mobility Domain Name

Command Mode

  • /exec

fabric database refresh vni

fabric database refresh { vni <vni-id> | include-vrf { <vrf-name> } }

Syntax Description

fabric

Fabric

database

Fabric Database

refresh

Refresh profile configuration

vni

Virtual Network Identifier

vni-id

include-vrf

Include VRF name

vrf-name

VRF name

Command Mode

  • /exec

fabric database static-host

[no] fabric database static-host

Syntax Description

no

(Optional) Negate a command or set its defaults

fabric

Fabric

database

Fabric Database

static-host

Configure a static host

Command Mode

  • /exec/configure

fabric database timer

[no] fabric database timer { aging | cleanup | recovery | re-add } <timeout>

Syntax Description

no

(Optional) Negate a command or set its defaults

fabric

database

timer

HMM timers

cleanup

Delay in minutes before profile is deleted

recovery

Delay in minutes before recovered profile is deleted

re-add

Delay in minutes before new client requests (after un-apply) are accepted

aging

Delay in minutes before profile is checked for aging

timeout

Set timeout in minutes

Command Mode

  • /exec/configure

fabric database type bl-dci

[no] fabric database type bl-dci

Syntax Description

no

(Optional) Negate a command or set its defaults

fabric

Fabric

database

Configure Fabric Database

type

Configure database type

bl-dci

Border Leaf - DCI

Command Mode

  • /exec/configure

fabric database type cabling

[no] fabric database type cabling

Syntax Description

no

(Optional) Negate a command or set its defaults

fabric

Fabric

database

Configure Fabric Database

type

Configure database type

cabling

Cable Management Database

Command Mode

  • /exec/configure

fabric database type host

[no] fabric database type host

Syntax Description

no

(Optional) Negate a command or set its defaults

fabric

Fabric

database

Configure Fabric Database

type

Configure database type

host

Host Database

Command Mode

  • /exec/configure

fabric database type network

[no] fabric database type network

Syntax Description

no

(Optional) Negate a command or set its defaults

fabric

Fabric

database

Configure Fabric Database

type

Configure database type

network

Network Database

Command Mode

  • /exec/configure

fabric database type partition

[no] fabric database type partition

Syntax Description

no

(Optional) Negate a command or set its defaults

fabric

Fabric

database

Configure Fabric Database

type

Configure database type

partition

Partition Database

Command Mode

  • /exec/configure

fabric database type profile

[no] fabric database type profile

Syntax Description

no

(Optional) Negate a command or set its defaults

fabric

Fabric

database

Configure Fabric Database

type

Configure database type

profile

Port or Switch Profile Database

Command Mode

  • /exec/configure

fabric forwarding admin-distance

{ fabric forwarding admin-distance <distance> } | { no fabric forwarding admin-distance }

Syntax Description

no

Negate a command or set its defaults

fabric

Fabric

forwarding

Fabric Forwarding Protocol: Host Mobility Manager (HMM)

admin-distance

Administrative distance for HMM host routes

distance

Set the administrative distance for HMM (default is 190)

Command Mode

  • /exec/configure

fabric forwarding anycast-gateway-mac

{ fabric forwarding anycast-gateway-mac <mac-addr> } | { no fabric forwarding anycast-gateway-mac }

Syntax Description

no

Negate a command or set its defaults

fabric

Fabric

forwarding

Fabric Forwarding Protocol: Host Mobility Manager (HMM)

anycast-gateway-mac

Anycast Gateway MAC of the Switch

mac-addr

MAC address

Command Mode

  • /exec/configure

fabric forwarding dup-host-ip-addr-detection

{ fabric forwarding dup-host-ip-addr-detection <mmoves> <nsecs> | no fabric forwarding dup-host-ip-addr-detection }

Syntax Description

no

Negate a command or set its defaults

fabric

Fabric

forwarding

Fabric Forwarding Protocol: Host Mobility Manager (HMM)

dup-host-ip-addr-detection

To detect duplicate host address in n secs

mmoves

Set Number of host moves to be allowed in n secs. Default is 5

nsecs

Set the duplicate detection timeout in secs for host moves. Default is 180

Command Mode

  • /exec/configure

fabric forwarding dup-host-recovery-timer recover-count

{ fabric forwarding dup-host-recovery-timer <timeout> recover-count <count> | no fabric forwarding dup-host-recovery-timer }

Syntax Description

no

Negate a command or set its defaults

fabric

Fabric

forwarding

Fabric Forwarding Protocol: Host Mobility Manager (HMM)

dup-host-recovery-timer

Refresh the frozen duplicate host

timeout

Set the timeout in secs to refresh the duplicate host. Default is 30 secs

recover-count

Maximum number of refreshes

count

Set the maximum number of host refresh. Default is 5.

Command Mode

  • /exec/configure

fabric forwarding dup-host-unfreeze-timer unfreeze-count

{ fabric forwarding dup-host-unfreeze-timer <timeout> unfreeze-count <count> | no fabric forwarding dup-host-unfreeze-timer }

Syntax Description

no

Negate a command or set its defaults

fabric

Fabric

forwarding

Fabric Forwarding Protocol: Host Mobility Manager (HMM)

dup-host-unfreeze-timer

Refresh the frozen duplicate host

timeout

Set the timeout in secs to refresh the duplicate host. Default is 180 secs

unfreeze-count

Maximum number of refreshes

count

Set the maximum number of host refresh

Command Mode

  • /exec/configure

fabric forwarding limit-vlan-mac

[no] fabric forwarding limit-vlan-mac <max-limit>

Syntax Description

no

(Optional) Negate a command or set its defaults

fabric

Fabric

forwarding

Fabric Forwarding Protocol: Host Mobility Manager (HMM)

limit-vlan-mac

Maximum number of end-hosts allowed to have the same (vlan, MAC) mapping in a given vrf (Default is 2048)

max-limit

Set max-limit

Command Mode

  • /exec/configure

fabric forwarding mode anycast-gateway

{ fabric forwarding mode anycast-gateway } | { no fabric forwarding mode }

Syntax Description

no

Negate a command or set its defaults

fabric

Fabric

forwarding

Fabric Forwarding Protocol: Host Mobility Manager (HMM)

mode

Forwarding Modes

anycast-gateway

Anycast Gateway Forwarding Mode

Command Mode

  • /exec/configure/if-vlan /exec/configure/if-vlan-range

fabric forwarding selective-host-probe

[no] fabric forwarding selective-host-probe

Syntax Description

no

(Optional) Negate a command or set its defaults

fabric

Fabric

forwarding

Fabric Forwarding Protocol: Host Mobility Manager (HMM)

selective-host-probe

Trigger unconditional host probe

Command Mode

  • /exec/configure

fabric forwarding system-check ready

fabric forwarding system-check { ready | not-ready }

Syntax Description

fabric

Fabric

forwarding

Fabric Forwarding Protocol: Host Mobility Manager (HMM)

system-check

System check

ready

Set to ready

not-ready

Set to not ready

Command Mode

  • /exec

fabric multicast event-history bgp

[no] fabric multicast event-history bgp { size { <size_in_text> | <size_in_kbytes> } }

Syntax Description

no

(Optional) Negate a command or set its defaults

fabric

Fabric

multicast

Configure multicast

event-history

Configure event-history buffer

bgp

BGP events for fabric multicast

size

Configure size

size_in_text

Buffer size

size_in_kbytes

Size in kbytes

Command Mode

  • /exec/configure

fabric multicast event-history ha

[no] fabric multicast event-history ha { size { <size_in_text> | <size_in_kbytes> } }

Syntax Description

no

(Optional) Negate a command or set its defaults

fabric

Fabric

multicast

Configure multicast

event-history

Configure event-history buffer

ha

ha events for fabric multicast

size

Configure size

size_in_text

Buffer size

size_in_kbytes

Size in kbytes

Command Mode

  • /exec/configure

fabric multicast event-history hmm

[no] fabric multicast event-history hmm { size { <size_in_text> | <size_in_kbytes> } }

Syntax Description

no

(Optional) Negate a command or set its defaults

fabric

Fabric

multicast

Configure multicast

event-history

Configure event-history buffer

hmm

HMM events for fabric multicast

size

Configure size

size_in_text

Buffer size

size_in_kbytes

Size in kbytes

Command Mode

  • /exec/configure

fabric multicast event-history isis

[no] fabric multicast event-history isis { size { <size_in_text> | <size_in_kbytes> } }

Syntax Description

no

(Optional) Negate a command or set its defaults

fabric

Fabric

multicast

Configure multicast

event-history

Configure event-history buffer

isis

ISIS events for fabric multicast

size

Configure size

size_in_text

Buffer size

size_in_kbytes

Size in kbytes

Command Mode

  • /exec/configure

fabric multicast event-history m2rib

[no] fabric multicast event-history m2rib { size { <size_in_text> | <size_in_kbytes> } }

Syntax Description

no

(Optional) Negate a command or set its defaults

fabric

Fabric

multicast

Configure multicast

event-history

Configure event-history buffer

m2rib

M2RIB events for fabric multicast

size

Configure size

size_in_text

Buffer size

size_in_kbytes

Size in kbytes

Command Mode

  • /exec/configure

fabric multicast event-history m6rib

[no] fabric multicast event-history m6rib { size { <size_in_text> | <size_in_kbytes> } }

Syntax Description

no

(Optional) Negate a command or set its defaults

fabric

Fabric

multicast

Configure multicast

event-history

Configure event-history buffer

m6rib

M6RIB events for fabric multicast

size

Configure size

size_in_text

Buffer size

size_in_kbytes

Size in kbytes

Command Mode

  • /exec/configure

fabric multicast event-history mrib

[no] fabric multicast event-history mrib { size { <size_in_text> | <size_in_kbytes> } }

Syntax Description

no

(Optional) Negate a command or set its defaults

fabric

Fabric

multicast

Configure multicast

event-history

Configure event-history buffer

mrib

MRIB events for fabric multicast

size

Configure size

size_in_text

Buffer size

size_in_kbytes

Size in kbytes

Command Mode

  • /exec/configure

fabric multicast event-history pim

[no] fabric multicast event-history pim { size { <size_in_text> | <size_in_kbytes> } }

Syntax Description

no

(Optional) Negate a command or set its defaults

fabric

Fabric

multicast

Configure multicast

event-history

Configure event-history buffer

pim

PIM events for fabric multicast

size

Configure size

size_in_text

Buffer size

size_in_kbytes

Size in kbytes

Command Mode

  • /exec/configure

fabric multicast event-history pim6

[no] fabric multicast event-history pim6 { size { <size_in_text> | <size_in_kbytes> } }

Syntax Description

no

(Optional) Negate a command or set its defaults

fabric

Fabric

multicast

Configure multicast

event-history

Configure event-history buffer

pim6

PIM6 events for fabric multicast

size

Configure size

size_in_text

Buffer size

size_in_kbytes

Size in kbytes

Command Mode

  • /exec/configure

failaction

[no] failaction { node { reassign | drop } | cluster drop } +

Syntax Description

no

(Optional) Negate a command or set its defaults

failaction

Configure failaction for PLB service

node

PLB failaction node

reassign

PLB failaction reassign

drop

PLB failaction drop

cluster

PLB failaction cluster

Command Mode

  • /exec/configure/plb

failaction

[no] failaction { [ node { reassign | drop | least-bucket | per-bucket } ] | [ bucket { distribute } ] | [ cluster drop ] }

Syntax Description

no

(Optional) Negate a command or set its defaults

failaction

ITD failaction

node

(Optional) ITD failaction node

reassign

(Optional) ITD failaction reassign

drop

(Optional) ITD failaction drop

least-bucket

(Optional) ITD failaction least-bucket node

per-bucket

(Optional) ITD failaction per-bucket node

bucket

(Optional) ITD failaction bucket reassign

distribute

(Optional) ITD failaction distribute reassign

cluster

(Optional) ITD failaction cluster

Command Mode

  • /exec/configure/itd

fan speed default

fan speed { default | set <speed> }

Syntax Description

fan

configure fan param.

speed

configure fan speed.

default

fan reset to old speed.

set

fan speed set to

speed

fan speed

Command Mode

  • /exec/configure

fast-convergence

fast-convergence | no fast-convergence

Syntax Description

no

Negate a command or set its defaults

fast-convergence

Enable vPC fast-convergence

Command Mode

  • /exec/configure/vpc-domain

fast-convergence

[no] fast-convergence

Syntax Description

no

(Optional) Negate a command or set its defaults

fast-convergence

Configure vPC fast convergence

Command Mode

  • /exec/configure/vpc-domain

fast-external-fallover

[no] fast-external-fallover

Syntax Description

no

(Optional) Negate a command or set its defaults

fast-external-fallover

Immediately reset the session if the link to a directly connected BGP peer goes down

Command Mode

  • /exec/configure/router-bgp

fast-flood enable

[no] fast-flood enable

Syntax Description

no

(Optional) Negate a command or set its defaults

fast-flood

Fast flood the LSP's

enable

Turn on fast-flooding

Command Mode

  • /exec/configure/router-isis/router-isis-vrf-common

fast-flood enable

[no] fast-flood enable

Syntax Description

no

(Optional) Negate a command or set its defaults

fast-flood

Fast flood the LSP's

enable

Turn on fast-flooding

Command Mode

  • /exec/configure/otv-isis/otv-isis-vrf-common

fast-flood enable

[no] fast-flood enable

Syntax Description

no

(Optional) Negate a command or set its defaults

fast-flood

Fast flood the LSP's

enable

Turn on fast-flooding

Command Mode

  • /exec/configure/l2mp-isis/l2mp-isis-vrf-common

fast-flood interval

[no] fast-flood interval <interval>

Syntax Description

no

(Optional) Negate a command or set its defaults

fast-flood

Fast flood the LSP's

interval

Duration/interval of the fast-flood timer.

interval

Specify the value (ms)

Command Mode

  • /exec/configure/router-isis/router-isis-vrf-common

fast-flood interval

[no] fast-flood interval <interval>

Syntax Description

no

(Optional) Negate a command or set its defaults

fast-flood

Fast flood the LSP's

interval

Duration/interval of the fast-flood timer.

interval

Specify the value (ms)

Command Mode

  • /exec/configure/otv-isis/otv-isis-vrf-common

fast-flood interval

[no] fast-flood interval <interval>

Syntax Description

no

(Optional) Negate a command or set its defaults

fast-flood

Fast flood the LSP's

interval

Duration/interval of the fast-flood timer.

interval

Specify the value (ms)

Command Mode

  • /exec/configure/l2mp-isis/l2mp-isis-vrf-common

fast-reload

fast-reload { [ nxos <uri> | trigger-gr | save-config | [ non-interruptive | nosrg ] ] + | force-all [ nxos <uri> ] + } [ override ]

Syntax Description

fast-reload

fast-reload software

nxos

(Optional) boot-variable name

uri

(Optional) Enter image uri

non-interruptive

(Optional) Non-Interruptive image upgrade

nosrg

(Optional) nosrg

override

(Optional) Do fast-reload without impact check

trigger-gr

(Optional) Enable BGP GR for compatible peers

save-config

(Optional) Save running-config to startup-config before fast-reload

force-all

Force upgrade the system

Command Mode

  • /exec

fast-reload network-os

fast-reload network-os <uri>

Syntax Description

fast-reload

fast-reload software

network-os

non-cisco OS

uri

Enter image uri

Command Mode

  • /exec

fast-reroute

[no] fast-reroute | fast-reroute [ node-protect | bw-protect ] +

Syntax Description

no

Negate a command or set its defaults

fast-reroute

Specify mpls tunnel can be fast-rerouted

node-protect

(Optional) node protection desired

bw-protect

(Optional) bandwidth protection desired

Command Mode

  • /exec/configure/if-te /exec/configure/tunnel-te/cbts-member

fast-reroute backup-prot-preempt optimize-bw

[no] fast-reroute backup-prot-preempt optimize-bw | no fast-reroute timers promotion | fast-reroute timers promotion <seconds>

Syntax Description

no

(Optional) Negate a command or set its defaults

fast-reroute

fast-reroute parameters

backup-prot-preempt

Preemption algorithm for backup tunnels

optimize-bw

Reduce bandwidth wastage (default: minimize LSPs preempted)

timers

configure fast-reroute timer

promotion

Configure how often we scan for LSP backup promotion

seconds

seconds between promotions (0 disables promotion.)

Command Mode

  • /exec/configure/te

fcdroplatency network

[no] fcdroplatency { network <i0> [ vsan <i1> ] | switch <i2> }

Syntax Description

no

(Optional) Negate a command or set its defaults

fcdroplatency

configure switch or network latency

network

network latency in milliseconds

i0

network latency in milliseconds

vsan

(Optional) VSAN id range

i1

(Optional)

switch

switch latency in milliseconds

i2

switch latency in milliseconds

Command Mode

  • /exec/configure

fcoe

[no] fcoe

Syntax Description

no

(Optional) Negate a command or set its default

fcoe

FCOE Congiguration

Command Mode

  • /exec/configure/vlan

fcoe

[no] fcoe

Syntax Description

no

(Optional) Negate a command or set its defaults

fcoe

create fcoe associate between fex and switch

Command Mode

  • /exec/configure/fex

fcoe clear-compatibility

fcoe clear-compatibility

Syntax Description

fcoe

FCOE command

clear-compatibility

Clear the Vfc over AA and bind to member port capability

Command Mode

  • /exec/configure

fcoe enable-fex

[no] fcoe enable-fex

Syntax Description

no

(Optional) Negate a command or set its defaults

fcoe

FCOE command

enable-fex

Enables FCoE over FEX HIF interfaces

Command Mode

  • /exec/configure

fcoe fcf-priority

fcoe fcf-priority <i0> | no fcoe fcf-priority

Syntax Description

no

Negate a command or set its defaults

fcoe

FCOE command

fcf-priority

FCF priority specification

i0

Enter FCF prirority

Command Mode

  • /exec/configure

fcoe fcmap

fcoe fcmap <i0> | no fcoe fcmap

Syntax Description

no

Negate a command or set its defaults

fcoe

FCOE command

fcmap

FC MAP specification

i0

Enter FCMAP

Command Mode

  • /exec/configure

fcoe fka-adv-period

fcoe fka-adv-period <i0> | no fcoe fka-adv-period

Syntax Description

no

Negate a command or set its defaults

fcoe

FCOE command

fka-adv-period

FKA Advertisement Period

i0

FKA Advertisement Period (in sec)

Command Mode

  • /exec/configure

fcoe veloopback

fcoe veloopback | no fcoe veloopback

Syntax Description

no

Negate a command or set its defaults

fcoe

FCOE command

veloopback

VFID check for VE ports

Command Mode

  • /exec/configure

fcoe vsan

fcoe vsan <tran-id> | no fcoe vsan

Syntax Description

no

Negate a command or set its default

fcoe

FCOE Congiguration

vsan

Translated VSAN Status

tran-id

Enter VSAN-ID being associated with VLAN-ID

Command Mode

  • /exec/configure/vlan

fctimer D_S_TOV

[no] fctimer D_S_TOV <i0> [ vsan <i1> ]

Syntax Description

no

(Optional) Negate a command or set its defaults

fctimer

configure fibre channel timers

D_S_TOV

D_S_TOV in milliseconds(5000-10000)

i0

D_S_TOV in milliseconds(5000-10000)

vsan

(Optional) Specify VSAN id

i1

(Optional) VSAN id

Command Mode

  • /exec/configure

fctimer E_D_TOV

[no] fctimer E_D_TOV <i0> [ vsan <i1> ]

Syntax Description

no

(Optional) Negate a command or set its defaults

fctimer

configure fibre channel timers

E_D_TOV

E_D_TOV in milliseconds(1000-4000)

i0

E_D_TOV in milliseconds(1000-4000)

vsan

(Optional) Specify VSAN id

i1

(Optional) VSAN id

Command Mode

  • /exec/configure

fctimer R_A_TOV

[no] fctimer R_A_TOV <i0> [ vsan <i1> ]

Syntax Description

no

(Optional) Negate a command or set its defaults

fctimer

configure fibre channel timers

R_A_TOV

R_A_TOV in milliseconds(5000-10000)

i0

R_A_TOV in milliseconds(5000-10000)

vsan

(Optional) Specify VSAN id

i1

(Optional) VSAN id

Command Mode

  • /exec/configure

fctimer abort

[no] fctimer abort

Syntax Description

no

(Optional) Negate a command or set its defaults

fctimer

configure fibre channel timers

abort

abort the fctimer configuration commands

Command Mode

  • /exec/configure

fctimer commit

[no] fctimer commit

Syntax Description

no

(Optional) Negate a command or set its defaults

fctimer

configure fibre channel timers

commit

commit the fctimer configuration commands

Command Mode

  • /exec/configure

fctimer distribute

[no] fctimer distribute

Syntax Description

no

(Optional) Negate a command or set its defaults

fctimer

configure fibre channel timers

distribute

Enable distribution of fctimer configuration using CFS

Command Mode

  • /exec/configure

feature-set

[no] feature-set <fs>

Syntax Description

no

Negate a command or set its defaults

feature-set

Enable feature-set

fs

allow feature-set

Command Mode

  • /exec/configure

feature-set

feature-set <fs>

Syntax Description

feature-set

Enable feature-set

fs

allow feature-set

Command Mode

  • /exec/configure

feature

[no] feature <arg1>

Syntax Description

no

(Optional) Negate a command or set its defaults

feature

Feature name

arg1

Enter feature name

Command Mode

  • /exec/configure/rolefeaturegrp

feature analytics

[no] feature analytics

Syntax Description

no

(Optional) Negate a command or set its defaults

feature

Command to enable/disable features

analytics

Enable/Disable Analytics!!!

Command Mode

  • /exec/configure

feature bash-shell

[no] feature bash-shell

Syntax Description

no

(Optional) Negate a command or set its defaults

feature

Command to enable/disable features

bash-shell

Enable/Disable bash-shell

Command Mode

  • /exec/configure

feature bfd

[no] feature bfd

Syntax Description

no

(Optional) Negate a command or set its defaults

feature

Command to enable/disable features

bfd

bfd

Command Mode

  • /exec/configure

feature bgp

[no] feature bgp

Syntax Description

no

(Optional) Negate a command or set its defaults

feature

Command to enable/disable features

bgp

Enable/Disable Border Gateway Protocol (BGP)

Command Mode

  • /exec/configure

feature catena

[no] feature catena

Syntax Description

no

(Optional) Negate a command or set its defaults

feature

Command to enable/disable features

catena

Enable/Disable catena

Command Mode

  • /exec/configure

feature container-tracker

[no] feature container-tracker

Syntax Description

no

(Optional) Negate a command or set its defaults

feature

Command to enable/disable features

container-tracker

Enable/Disable NXOS Container Tracker

Command Mode

  • /exec/configure

feature dhcp

[no] feature dhcp

Syntax Description

no

(Optional) Negate a command or set its defaults

feature

Command to enable/disable features

dhcp

Enable/Disable DHCP Manager

Command Mode

  • /exec/configure

feature dot1x

[no] feature dot1x

Syntax Description

no

(Optional) Negate a command or set its defaults

feature

Command to enable/disable features

dot1x

Enable/Disable dot1x

Command Mode

  • /exec/configure

feature eigrp

[no] feature eigrp

Syntax Description

no

(Optional) Negate a command or set its defaults

feature

Command to enable/disable features

eigrp

Enable/Disable Enhanced Interior Gateway Routing Protocol (EIGRP)

Command Mode

  • /exec/configure

feature evb

[no] feature evb

Syntax Description

no

(Optional) Negate a command or set its defaults

feature

Command to enable/disable features

evb

Enable/Disable Edge Virtual Bridge (EVB)

Command Mode

  • /exec/configure

feature evmed

[no] feature evmed

Syntax Description

no

(Optional) Negate a command or set its defaults

feature

Command to enable/disable features

evmed

Enable/Disable Generic event detectors

Command Mode

  • /exec/configure

feature fabric forwarding

[no] feature fabric forwarding

Syntax Description

no

(Optional) Negate a command or set its defaults

feature

Command to enable/disable features

fabric

Enable/Disable Fabric Services

forwarding

Enable/Disable Fabric Forwarding Protocol: Host Mobility Manager (HMM)

Command Mode

  • /exec/configure

feature flexlink

[no] feature flexlink

Syntax Description

no

(Optional) Negate a command or set its defaults

feature

Command to enable/disable features

flexlink

Enable/Disable Flexlink

Command Mode

  • /exec/configure

feature grpc

[no] feature grpc

Syntax Description

no

(Optional) Negate a command or set its defaults

feature

Command to enable/disable features

grpc

Enable/Disable grpc Services

Command Mode

  • /exec/configure

feature hardware-telemetry

[no] feature hardware-telemetry

Syntax Description

no

(Optional) Negate a command or set its defaults

feature

Command to enable/disable features

hardware-telemetry

Enable/Disable Hardware Telemetry

Command Mode

  • /exec/configure

feature hsrp

[no] feature hsrp

Syntax Description

no

(Optional) Negate a command or set its defaults

feature

Command to enable/disable features

hsrp

Enable/Disable Hot Standby Router Protocol (HSRP)

Command Mode

  • /exec/configure

feature icam

[no] feature icam

Syntax Description

no

(Optional) Negate a command or set its defaults

feature

Command to enable/disable features

icam

Enable/Disable icam

Command Mode

  • /exec/configure

feature imp

[no] feature imp

Syntax Description

no

(Optional) Negate a command or set its defaults

feature

Command to enable/disable features

imp

Enable/Disable IMP

Command Mode

  • /exec/configure

feature interface-vlan

[no] feature interface-vlan

Syntax Description

no

(Optional) Negate a command or set its defaults

feature

Command to enable/disable features

interface-vlan

Enable/Disable interface vlan

Command Mode

  • /exec/configure

feature isis

[no] feature isis

Syntax Description

no

(Optional) Negate a command or set its defaults

feature

Command to enable/disable features

isis

Enable/Disable IS-IS Unicast Routing Protocol (IS-IS)

Command Mode

  • /exec/configure

feature itd

[no] feature itd

Syntax Description

no

(Optional) Negate a command or set its defaults

feature

Command to enable/disable features

itd

Enable/Disable ITD

Command Mode

  • /exec/configure

feature lacp

[no] feature lacp

Syntax Description

no

(Optional) Negate a command or set its defaults

feature

Command to enable/disable features

lacp

Enable/Disable LACP

Command Mode

  • /exec/configure

feature ldap

[no] feature ldap

Syntax Description

no

(Optional) Negate a command or set its defaults

feature

Command to enable/disable features

ldap

Enable/Disable ldap

Command Mode

  • /exec/configure

feature lldp

[no] feature lldp

Syntax Description

no

(Optional) Negate a command or set its defaults

feature

Command to enable/disable features

lldp

Enable/Disable LLDP

Command Mode

  • /exec/configure

feature macsec

[no] feature macsec

Syntax Description

no

(Optional) Negate a command or set its defaults

feature

Command to enable/disable features

macsec

Enable/Disable CTS

Command Mode

  • /exec/configure

feature mpls evpn

[no] feature mpls evpn

Syntax Description

no

(Optional) Negate a command or set its defaults

feature

Command to enable/disable features

mpls

Enable/Disable MPLS Services

evpn

Enable MPLS EVPN

Command Mode

  • /exec/configure

feature mpls l3vpn

[no] feature mpls l3vpn

Syntax Description

no

(Optional) Negate a command or set its defaults

feature

Command to enable/disable features

mpls

Enable/Disable MPLS Services

l3vpn

Enable/Disable Layer 3 Virtual Private Networks

Command Mode

  • /exec/configure

feature mpls ldp

[no] feature mpls ldp

Syntax Description

no

(Optional) Negate a command or set its defaults

feature

Command to enable/disable features

mpls

Enable/Disable MPLS Services

ldp

Enable/Disable Label Distribution Protocol

Command Mode

  • /exec/configure

feature mpls oam

[no] feature mpls oam

Syntax Description

no

(Optional) Negate a command or set its defaults

feature

Command to enable/disable features

mpls

Enable/Disable MPLS Services

oam

Enable MPLS OAM

Command Mode

  • /exec/configure

feature mpls segment-routing

[no] feature mpls segment-routing

Syntax Description

no

(Optional) Negate a command or set its defaults

feature

Command to enable/disable features

mpls

Enable/Disable MPLS Services

segment-routing

Enable Segment-routing

Command Mode

  • /exec/configure

feature mpls segment-routing traffic-engineering

[no] feature mpls segment-routing traffic-engineering

Syntax Description

no

(Optional) Negate a command or set its defaults

feature

Command to enable/disable features

mpls

Enable/Disable MPLS Services

segment-routing

Enable Segment-routing

traffic-engineering

Enable/Disable segment-routing traffic-engineering

Command Mode

  • /exec/configure

feature mpls static

[no] feature mpls static

Syntax Description

no

(Optional) Negate a command or set its defaults

feature

Command to enable/disable features

mpls

Enable/Disable MPLS Services

static

Enable/Disable Static Labeled Paths

Command Mode

  • /exec/configure

feature mpls traffic-engineering

[no] feature mpls traffic-engineering

Syntax Description

no

(Optional) Negate a command or set its defaults

feature

Command to enable/disable features

mpls

Enable/Disable MPLS Services

traffic-engineering

Enable/Disable MPLS Traffic Engineering

Command Mode

  • /exec/configure

feature msdp

[no] feature msdp

Syntax Description

no

(Optional) Negate a command or set its defaults

feature

Command to enable/disable features

msdp

Enable/Disable Multicast Source Discovery Protocol (MSDP)

Command Mode

  • /exec/configure

feature mvpn

[no] feature mvpn

Syntax Description

no

(Optional) Negate a command or set its defaults

feature

Command to enable/disable features

mvpn

Multicast Virtual Private Networks.

Command Mode

  • /exec/configure

feature nat

[no] feature nat

Syntax Description

no

(Optional) Negate a command or set its defaults

feature

Command to enable/disable features

nat

Enable/Disable NAT

Command Mode

  • /exec/configure

feature nbm

[no] feature nbm

Syntax Description

no

(Optional) Negate a command or set its defaults

feature

Command to enable/disable a feature

nbm

Enable/Disable Non Blocking Multicast (NBM) feature

Command Mode

  • /exec/configure

feature netconf

[no] feature netconf

Syntax Description

no

(Optional) Negate a command or set its defaults

feature

Command to enable/disable features

netconf

Enable/Disable netconf Services

Command Mode

  • /exec/configure

feature netflow

[no] feature netflow

Syntax Description

no

(Optional) Negate a command or set its defaults

feature

Command to enable/disable features

netflow

Enable/Disable NetFlow

Command Mode

  • /exec/configure

feature ngmvpn

[no] feature ngmvpn

Syntax Description

no

(Optional) Negate a command or set its defaults

feature

Command to enable/disable features

ngmvpn

Enable/Disable EVPN/MVPN features

Command Mode

  • /exec/configure

feature ngoam

[no] feature ngoam

Syntax Description

no

(Optional) Negate a command or set its defaults

feature

Command to enable/disable features

ngoam

Enable/Disable ngoam

Command Mode

  • /exec/configure

feature ngoam

[no] feature ngoam

Syntax Description

no

(Optional) Negate a command or set its defaults

feature

Command to enable/disable features

ngoam

Enable/Disable ngoam

Command Mode

  • /exec/configure

feature npiv

[no] feature npiv

Syntax Description

no

(Optional) Negate a command or set its defaults

feature

Command to enable/disable features

Command Mode

  • /exec/configure

feature ntp

[no] feature ntp

Syntax Description

no

(Optional) Negate a command or set its default

feature

Command to enable/disable features

ntp

Enable/Disable NTP

Command Mode

  • /exec/configure

feature nv overlay

[no] feature nv overlay

Syntax Description

no

(Optional) Negate a command or set its defaults

feature

Command to enable/disable features

nv

Enable/Disable VxLAN

overlay

Enable/Disable VxLAN

Command Mode

  • /exec/configure

feature nxapi

[no] feature nxapi

Syntax Description

no

(Optional) Negate a command or set its defaults

feature

Command to enable/disable features

nxapi

Enable/Disable nxapi

Command Mode

  • /exec/configure

feature nxdb

[no] feature nxdb

Syntax Description

no

(Optional) Negate a command or set its defaults

feature

Command to enable/disable features

nxdb

Enable/Disable nxdb

Command Mode

  • /exec/configure

feature nxsdk

[no] feature nxsdk

Syntax Description

no

(Optional) Negate a command or set its defaults

feature

Command to enable/disable features

nxsdk

Enable/Disable nxsdk Services

Command Mode

  • /exec/configure

feature openflow

[no] feature openflow

Syntax Description

no

(Optional) Negate a command or set its defaults

feature

Command to enable/disable features

openflow

Enable/Disable OpenFlow agent

Command Mode

  • /exec/configure

feature openflow

[no] feature openflow

Syntax Description

no

(Optional) Negate a command or set its defaults

feature

Command to enable/disable features

openflow

Enable/Disable OpenFlow agent

Command Mode

  • /exec/configure

feature ospf

[no] feature ospf

Syntax Description

no

(Optional) Negate a command or set its defaults

feature

Command to enable/disable features

ospf

Enable/Disable Open Shortest Path First Protocol (OSPF)

Command Mode

  • /exec/configure

feature ospfv3

[no] feature ospfv3

Syntax Description

no

(Optional) Negate a command or set its defaults

feature

Command to enable/disable features

ospfv3

Enable/Disable Open Shortest Path First Version 3 Protocol (OSPFv3)

Command Mode

  • /exec/configure

feature password encryption aes

[no] feature password encryption aes

Syntax Description

no

(Optional) Negate a command or set its defaults

feature

Enable the feature

password

Credential(s) for the user(s)/device(s)

encryption

Strong encryption for credential(s)

aes

Encrypt using AES encryption standard

Command Mode

  • /exec/configure

feature pbr

[no] feature pbr

Syntax Description

no

(Optional) Negate a command or set its defaults

feature

Command to enable/disable features

pbr

Enable/Disable Policy Based Routing(PBR)

Command Mode

  • /exec/configure

feature pim

[no] feature pim

Syntax Description

no

(Optional) Negate a command or set its defaults

feature

Command to enable/disable features

pim

Enable/Disable Protocol Independent Multicast (PIM)

Command Mode

  • /exec/configure

feature pim6

[no] feature pim6

Syntax Description

no

(Optional) Negate a command or set its defaults

feature

Command to enable/disable features

pim6

Enable/Disable Protocol Independent Multicast(PIM) for IPv6

Command Mode

  • /exec/configure

feature plb

[no] feature plb

Syntax Description

no

(Optional) Negate a command or set its defaults

feature

Command to enable/disable features

plb

Enable/Disable Pervasive Load Balancing feature

Command Mode

  • /exec/configure

feature poap

[no] feature poap

Syntax Description

no

(Optional) Negate a command or set its defaults

feature

Command to enable/disable features

poap

Enable/Disable POAP

Command Mode

  • /exec/configure

feature poe

[no] feature poe

Syntax Description

no

(Optional) Negate a command or set its defaults

feature

Command to enable/disable a feature

poe

Enable/Disable Power over Ethernet(PoE) feature

Command Mode

  • /exec/configure

feature pong

[no] feature pong

Syntax Description

no

(Optional) Negate a command or set its defaults

feature

Command to enable/disable features

pong

Enable/Disable Pong

Command Mode

  • /exec/configure

feature port-security

[no] feature port-security

Syntax Description

no

(Optional) Negate a command or set its defaults

feature

Command to enable/disable eth port security features

port-security

Enable/Disable port-security

Command Mode

  • /exec/configure

feature private-vlan

[no] feature private-vlan

Syntax Description

no

(Optional) Negate a command or set its defaults

feature

Command to enable/disable features

private-vlan

Enable/Disable private-vlan

Command Mode

  • /exec/configure

feature privilege

[no] feature privilege

Syntax Description

no

(Optional) Negate a command or set its defaults

feature

Command to enable/disable features

privilege

Enable/Disable IOS type privilege level support

Command Mode

  • /exec/configure

feature ptp

[no] feature ptp

Syntax Description

no

(Optional) Negate a command or set its defaults

feature

Command to enable/disable features

ptp

Enable/Disable PTP

Command Mode

  • /exec/configure

feature restconf

[no] feature restconf

Syntax Description

no

(Optional) Negate a command or set its defaults

feature

Command to enable/disable features

restconf

Enable/Disable restconf Services

Command Mode

  • /exec/configure

feature rip

[no] feature rip

Syntax Description

no

(Optional) Negate a command or set its defaults

feature

Command to enable/disable features

rip

Enable/Disable Routing Information Protocol (RIP)

Command Mode

  • /exec/configure

feature scheduler

[no] feature scheduler

Syntax Description

no

(Optional) Negate a command or set its defaults

feature

Command to enable/disable features

scheduler

Enable/Disable scheduler

Command Mode

  • /exec/configure

feature scp-server

[no] feature scp-server

Syntax Description

no

(Optional) Negate a command or set its defaults

feature

Command to enable/disable features

scp-server

Enable/Disable SCP server

Command Mode

  • /exec/configure

feature sflow

[no] feature sflow

Syntax Description

no

(Optional) Negate a command or set its defaults

feature

Command to enable/disable features

sflow

Enable/Disable sFlow agent

Command Mode

  • /exec/configure

feature sftp-server

[no] feature sftp-server

Syntax Description

no

(Optional) Negate a command or set its defaults

feature

Command to enable/disable features

sftp-server

Enable/Disable SFTP server

Command Mode

  • /exec/configure

feature sla responder

[no] feature sla responder

Syntax Description

no

(Optional) Negate a command or set its defaults

feature

Command to enable/disable features

sla

Enable/Disable SLA

responder

Enable/Disable responder part of SLA

Command Mode

  • /exec/configure

feature sla sender

[no] feature sla sender

Syntax Description

no

(Optional) Negate a command or set its defaults

feature

Command to enable/disable features

sla

Enable/Disable SLA

sender

Enable/Disable sender part of SLA

Command Mode

  • /exec/configure

feature sla twamp-server

[no] feature sla twamp-server

Syntax Description

no

(Optional) Negate a command or set its defaults

feature

Command to enable/disable features

sla

Enable/Disable SLA

twamp-server

Enable/Disable twamp-server part of SLA

Command Mode

  • /exec/configure

feature smart-channel

[no] feature smart-channel

Syntax Description

no

(Optional) Negate a command or set its defaults

feature

Command to enable/disable features

smart-channel

Enable/Disable smart-channel

Command Mode

  • /exec/configure

feature ssh

[no] feature ssh

Syntax Description

no

(Optional) Negate a command or set its defaults

feature

Command to enable/disable features

ssh

Enable/Disable ssh

Command Mode

  • /exec/configure

feature tacacs

[no] feature tacacs +

Syntax Description

no

(Optional) Negate a command or set its defaults

feature

Command to enable/disable features

Command Mode

  • /exec/configure

feature telemetry

[no] feature telemetry

Syntax Description

no

(Optional) Negate a command or set its defaults

feature

Command to enable/disable features

telemetry

Enable/Disable Telemetry

Command Mode

  • /exec/configure

feature telnet

[no] feature telnet

Syntax Description

no

(Optional) Negate a command or set its defaults

feature

Command to enable/disable features

telnet

Enable/Disable telnet

Command Mode

  • /exec/configure

feature tunnel

[no] feature tunnel

Syntax Description

no

(Optional) Negate a command or set its defaults

feature

Command to enable/disable features

tunnel

Enable/Disable Tunnel Manager

Command Mode

  • /exec/configure

feature udld

[no] feature udld

Syntax Description

no

(Optional) Negate a command or set its defaults

feature

Command to enable/disable features

udld

Enable/Disable UDLD

Command Mode

  • /exec/configure

feature vmtracker

[no] feature vmtracker

Syntax Description

no

(Optional) Negate a command or set its defaults

feature

Command to enable/disable features

vmtracker

Enable/Disable VM Tracker feature

Command Mode

  • /exec/configure

feature vn-segment-vlan-based

[no] feature vn-segment-vlan-based

Syntax Description

no

(Optional) Negate a command or set its defaults

feature

Command to enable/disable features

vn-segment-vlan-based

Enable/Disable VLAN based VN segment

Command Mode

  • /exec/configure

feature vpc

[no] feature vpc

Syntax Description

no

(Optional) Negate a command or set its defaults

feature

Command to enable/disable features

vpc

Enable/Disable VPC (Virtual Port Channel)

Command Mode

  • /exec/configure

feature vrrp

[no] feature vrrp

Syntax Description

no

(Optional) Negate a command or set its defaults

feature

Command to enable/disable features

vrrp

Enable/Disable Virtual Router Redundancy Protocol (VRRP)

Command Mode

  • /exec/configure

feature vrrpv3

[no] feature vrrpv3

Syntax Description

no

(Optional) Negate a command or set its defaults

feature

Command to enable/disable features

vrrpv3

Enable/Disable Virtual Router Redundancy Protocol (VRRP) version 3

Command Mode

  • /exec/configure

feature vtp

[no] feature vtp

Syntax Description

no

(Optional) Negate a command or set its defaults

feature

Command to enable/disable features

vtp

Enable/Disable VTP

Command Mode

  • /exec/configure

fec

fec <fec_val> | no fec [ <fec_val> ]

Syntax Description

no

Negate a command or set its defaults

fec

Forwarding error correction

fec_val

Interface FEC options

Command Mode

  • /exec/configure/if-ethernet-all /exec/configure/if-eth-base

fec

fec <fec_val_old> | no fec [ <fec_val_old> ]

Syntax Description

no

Negate a command or set its defaults

fec

Forwarding error correction

fec_val_old

Interface FEC options

Command Mode

  • /exec/configure/if-ethernet-all /exec/configure/if-eth-base

fhrp delay minimum

[no] fhrp delay minimum | fhrp delay minimum <delay>

Syntax Description

no

Negate a command or set its defaults

fhrp

FHRP interface configuration commands

delay

Configure FHRP delay

minimum

minimum delay

delay

Seconds to delay

Command Mode

  • /exec/configure/if-eth-any /exec/configure/if-vlan

fhrp delay reload

[no] fhrp delay reload | fhrp delay reload <delay>

Syntax Description

no

Negate a command or set its defaults

fhrp

FHRP interface configuration commands

delay

Configure FHRP delay

reload

reload delay

delay

Seconds to delay

Command Mode

  • /exec/configure/if-eth-any /exec/configure/if-vlan

filesys delete

filesys delete <s0>

Syntax Description

filesys

file system command

delete

delete a file on file system

s0

file name

Command Mode

  • /exec

filter

[no] filter [ subject-name <s0> | altname-email <s1> | altname-upn <s2> ]

Syntax Description

no

(Optional) Negate a command or set its defaults

filter

Configure mapping filter

subject-name

(Optional) Subject name of the certificate

s0

(Optional) Subject name

altname-email

(Optional) Email id as an alternate name

s1

(Optional) Email id

altname-upn

(Optional) User principal name as an alternate name

s2

(Optional) User principal name

Command Mode

  • /exec/configure/certmap-filter

filter access-group

[no] filter access-group <acl-name> [ allow-sharing ]

Syntax Description

no

(Optional) Negate a command or set its defaults

filter

Filter configuration

access-group

access control group

acl-name

access control list name

allow-sharing

(Optional) allow up to 4 access control groups on same source interface

Command Mode

  • /exec/configure/monitor-local-src /exec/configure/config-monitor /exec/configure/config-monitor-erspan-src

filter ip

[no] filter ip <src_ip> <src_mask> <dst_ip> <dst_mask>

Syntax Description

no

(Optional) Negate a command or set its defaults

filter

Set SPAN filter options

ip

Set SPAN IP filtering options

src_ip

Set source IP address

src_mask

Set source IP mask

dst_ip

Set destination IP address

dst_mask

Set destination IP mask

Command Mode

  • /exec/configure/monitor-local-src /exec/configure/config-monitor /exec/configure/config-monitor-erspan-src

filter ipv6 access-group

[no] filter ipv6 access-group <acl-name> [ allow-sharing ]

Syntax Description

no

(Optional) Negate a command or set its defaults

filter

Filter configuration

ipv6

ipv6 access group

access-group

access control group

acl-name

access control list name

allow-sharing

(Optional) allow up to 4 access control groups on same source interface

Command Mode

  • /exec/configure/monitor-local-src /exec/configure/config-monitor /exec/configure/config-monitor-erspan-src

filter mac

[no] filter mac <src_mac> <src_mask> <dst_mac> <dst_mask>

Syntax Description

no

(Optional) Negate a command or set its defaults

filter

Set SPAN filter options

mac

Set SPAN MAC filtering options

src_mac

Set source MAC address

src_mask

Set source MAC mask

dst_mac

Set destination MAC address

dst_mask

Set destination MAC mask

Command Mode

  • /exec/configure/monitor-local-src /exec/configure/config-monitor /exec/configure/config-monitor-erspan-src

filter out

[ no | default ] { filter-list <fltrlist-name> } { out | in }

Syntax Description

no

(Optional) Negate a command or set its defaults

default

(Optional) Inherit values from a peer template

filter-list

Apply AS-PATH filter-list

fltrlist-name

Name of filter-list

out

Apply policy to outgoing routes

in

Apply policy to incoming routes

Command Mode

  • /exec/configure/router-bgp/router-bgp-neighbor/router-bgp-neighbor-af /exec/configure/router-bgp/router-bgp-neighbor/router-bgp-neighbor-af-vpnv4 /exec/configure/router-bgp/router-bgp-neighbor/router-bgp-neighbor-af-ipv4-mdt /exec/configure/router-bgp/router-bgp-neighbor/router-bgp-neighbor-af-vpnv6 /exec/configure/router-bgp/router-bgp-neighbor/router-bgp-neighbor-af-l2vpn-vpls /exec/configure/router-bgp/router-bgp-neighbor/router-bgp-neighbor-af-ipv4-mvpn /exec/configure/router-bgp/router-bgp-neighbor/router-bgp-neighbor-af-ipv6-mvpn /exec/configure/router-bgp/router-bgp-neighbor/router-bgp-neighbor-af-l2vpn-evpn /exec/configure/router-bgp/router-bgp-neighbor/router-bgp-neighbor-af-ipv4-label /exec/configure/router-bgp/router-bgp-neighbor/router-bgp-neighbor-af-ipv6-label

filter tx control-packets

[no] filter tx control-packets

Syntax Description

no

(Optional) Negate a command or set its defaults

filter

Set SPAN filter options

tx

Set SPAN tx filtering options

control-packets

Filter out CPU generated packets and SPAN only data packets

Command Mode

  • /exec/configure/monitor-local-src /exec/configure/config-monitor /exec/configure/config-monitor-erspan-src

filter vlan

[no] filter vlan <vlan_mrange> [ include-untagged ]

Syntax Description

no

(Optional) Negate a command or set its defaults

filter

Filter configuration

vlan

Vlan type

vlan_mrange

include-untagged

(Optional) Include untagged frames on port with Layer 3 subinterfaces

Command Mode

  • /exec/configure/monitor-local-src /exec/configure/config-monitor /exec/configure/config-monitor-erspan-src

filter vlan include-untagged

[no] filter vlan include-untagged

Syntax Description

no

(Optional) Negate a command or set its defaults

filter

Filter configuration

vlan

Vlan type

include-untagged

Include untagged frames on port with Layer 3 subinterfaces

Command Mode

  • /exec/configure/config-monitor

find

find <s0>

Syntax Description

find

Find a file below the current directory

s0

Enter the filename prefix to search

Command Mode

  • /exec

fips debug errors debug

[no] fips debug errors { debug-lc-post-on-maint | reset-debug-lc-post-on-maint }

Syntax Description

no

(Optional) Negate a command or set its defaults

fips

Enable/Disable FIPS mode

debug

Introduce errors into FIPS tests

errors

Introduce errors

debug-lc-post-on-maint

Run the switch on debug mode for fips maintenance state

reset-debug-lc-post-on-maint

Reset the mode from debug-lc-post-on-maint

Command Mode

  • /exec/

fips mode enable

[no] fips mode enable

Syntax Description

no

(Optional) Negate a command or set its defaults

fips

Enable/Disable FIPS mode

mode

FIPS mode

enable

Enable/Disable FIPS mode

Command Mode

  • /exec/configure

flow-count

[no] flow-count <count>

Syntax Description

flow-count

Flow count throttle for drop events

count

<1-32767>

Command Mode

  • /exec/configure/config-fte-event/group-latency-events

flow-count

[no] flow-count <count>

Syntax Description

flow-count

Flow count throttle for drop events

count

<1-32767>

Command Mode

  • /exec/configure/config-fte-event/group-drop-events

flow exporter

[no] flow exporter <exportername>

Syntax Description

flow

Enable/Disable NetFlow configuration

exporter

Define a Flow Exporter

exportername

Name of Flow Exporter

Command Mode

  • /exec/configure

flow forward

[no] flow { forward | reverse }

Syntax Description

no

(Optional) Negate a command or set its defaults

flow

Configure ngoam flow

forward

Ngoam forward flow

reverse

Ngoam reverse flow

Command Mode

  • /exec/configure/configngoamprofile

flow monitor

[no] flow monitor <monitorname>

Syntax Description

flow

Enable/Disable NetFlow configuration

monitor

Define a Flow Monitor

monitorname

Name of Flow Monitor

Command Mode

  • /exec/configure

flow record

[no] flow record <recordname>

Syntax Description

flow

Enable/Disable NetFlow configuration

record

Define a Flow Record

recordname

Record name

Command Mode

  • /exec/configure

flow timeout

{ [ no ] flow timeout <time> | no flow timeout }

Syntax Description

flow

Enable/Disable NetFlow configuration

timeout

Define a Flow Timeout

time

Time in seconds (flush-cache-Only)

Command Mode

  • /exec/configure

flowcontrol hardware

[no] flowcontrol hardware

Syntax Description

no

(Optional) Negate a command or set its defaults

flowcontrol

Set flow control

hardware

Set hardware flowcontrol

Command Mode

  • /exec/configure/com1

flowcontrol receive

flowcontrol { receive { <rx_flowctrl> } | send { <tx_flowctrl> } } | no flowcontrol { receive [ { <rx_flowctrl> } ] | send [ { <tx_flowctrl> } ] }

Syntax Description

no

Negate a command or set its defaults

flowcontrol

Configure interface flowcontrol

receive

Receive pause frames

rx_flowctrl

Receive flow control

send

Send pause frames

tx_flowctrl

Send flow control

Command Mode

  • /exec/configure/if-ethernet-all /exec/configure/if-eth-non-member /exec/configure/if-port-channel

flush-routes

[no] flush-routes

Syntax Description

no

(Optional) Negate a command or set its defaults

flush-routes

Flush routes in RIB during restart

Command Mode

  • /exec/configure/router-eigrp

flush-routes

[no] flush-routes

Syntax Description

no

(Optional) Negate a command or set its defaults

flush-routes

Flush routes in RIB during restart

Command Mode

  • /exec/configure/router-rip

flush-routes

[no] flush-routes

Syntax Description

no

(Optional) Negate a command or set its defaults

flush-routes

Flush routes on non-graceful controlled restart

Command Mode

  • /exec/configure/router-isis

flush-routes

[no] flush-routes

Syntax Description

no

(Optional) Negate a command or set its defaults

flush-routes

Flush routes on a non-graceful controlled restart

Command Mode

  • /exec/configure/router-ospf3

flush-routes

[no] flush-routes

Syntax Description

no

(Optional) Negate a command or set its defaults

flush-routes

Flush routes on a non-graceful controlled restart

Command Mode

  • /exec/configure/router-ospf

flush-routes

[no] flush-routes

Syntax Description

no

(Optional) Negate a command or set its defaults

flush-routes

Flush routes in RIB upon controlled restart

Command Mode

  • /exec/configure/router-bgp

follow

follow <name> | no follow

Syntax Description

no

Negate a command or set its defaults

follow

Group to be followed

name

master name string to follow

Command Mode

  • /exec/configure/if-eth-any/hsrp_ipv4 /exec/configure/if-eth-any/hsrp_ipv6

forceshut reset-reason

forceshut [ { module <module> | <s0> <santa-cruz-range> | zone <zonenum> <subzone> } ] reset-reason <reset_reason_string>

Syntax Description

forceshut

Force the entire switch to shut down

module

(Optional) Optional. Module to be forceshut(optional arg)

module

(Optional) please enter the module number

s0

(Optional) Power off a specific xbar

santa-cruz-range

(Optional) please enter the xbar number

zone

(Optional) Optional. Zone to be forceshut(optional arg)

zonenum

(Optional) please enter the zone number

subzone

(Optional) please enter the subzone number

reset-reason

Shut down (with reset-reason)

reset_reason_string

please enter reset_reason_string in quotes

Command Mode

  • /exec

format

format <uri1>

Syntax Description

format

Format disks

uri1

destination filesystem path

Command Mode

  • /exec

format bootflash

format bootflash:

Syntax Description

format

Format disks

bootflash:

Format bootflash:

Command Mode

  • /exec

format bootflash check-filesystem

format bootflash: check-filesystem

Syntax Description

format

Format disks

bootflash:

Format bootflash:

check-filesystem

Format bootflash: and fix any errors in file system

Command Mode

  • /exec

format usb1

format usb1:

Syntax Description

format

Format disks

usb1:

Format usb1:

Command Mode

  • /exec

forward

[no] forward

Syntax Description

no

(Optional) Negate a command or set its defaults

forward

Configure paths

Command Mode

  • /exec/configure/mpls_static/ipv4/lsp/inlabel

forwarding-adjacency

[no] forwarding-adjacency | forwarding-adjacency [ holdtime <msec> ]

Syntax Description

no

Negate a command or set its defaults

forwarding-adjacency

Treat this tunnel as a Forwarding Adjacency

holdtime

(Optional) How long in msecs to wait upon flooding a down Forwarding Adjacency

msec

(Optional) Holdtime on MPLS TE Down

Command Mode

  • /exec/configure/if-te

fragments

[no] fragments <opt_type>

Syntax Description

no

(Optional) Negate a command or set its defaults

opt_type

frag_op_type

Command Mode

  • /exec/configure/ipacl /exec/configure/ipv6acl

frequency

{ { no | default } frequency | frequency <seconds> }

Syntax Description

no

default

Set a command to its defaults

frequency

Frequency of an operation

seconds

Frequency in seconds

Command Mode

  • /exec/configure/ip-sla/udp /exec/configure/ip-sla/jitter /exec/configure/ip-sla/tcp /exec/configure/ip-sla/icmpEcho /exec/configure/ip-sla/dns /exec/configure/ip-sla/fabricPathEcho /exec/configure/ip-sla/http

from to

[no] { { from <frm-list> to <to-val> } | { default { <value> | copy | ignore } } }

Syntax Description

no

(Optional) Negate a command or set its defaults

from

Map values from this

frm-list

Original list of values which are to be mapped

to

Map values to this

to-val

New mapped value

default

map default values

value

default value to be set

copy

Do a default copy

ignore

Ignore any unspecified values

Command Mode

  • /exec/configure/table-map

from to

{ [ no ] { { from <frm-list> to <to-val> } | { default <value> } } } | default copy

Syntax Description

no

(Optional) Negate a command or set its defaults

from

Map values from this

frm-list

Original list of values which are to be mapped

to

Map values to this

to-val

New mapped value

default

map default values

value

default value to be set

copy

Do a default copy

Command Mode

  • /exec/configure/def-tmap

fte event

[no] fte event <eventname>

Syntax Description

fte

Enable/Disable FTE configuration

event

Define a FTE event

eventname

Event name

Command Mode

  • /exec/configure/config-fte

fte exporter

[no] fte exporter <exportername>

Syntax Description

fte

Enable/Disable Flow Table Events configuration

exporter

Define a events Exporter

exportername

Name of event Exporter

Command Mode

  • /exec/configure/config-fte

fte monitor

[no] fte monitor <monitorname>

Syntax Description

fte

Enable/Disable FTE configuration

monitor

Define a FTE Monitor

monitorname

Name of FTE Monitor

Command Mode

  • /exec/configure/config-fte

fte record

[no] fte record <recordname>

Syntax Description

fte

Enable/Disable FTE configuration

record

Define a FTE Record

recordname

Record name

Command Mode

  • /exec/configure/config-fte

fte system monitor

[no] fte system monitor <monitorname>

Syntax Description

fte

change fte global settings

system

global config

monitor

fte Monitor to be applied

monitorname

ssx Monitor to be applied

Command Mode

  • /exec/configure/config-fte

ftrace

ftrace [ { set-opt { option <n0> <v0> | filter <f0> <v0> } { proc <p0> | buf_size <b0> } [ <s0> ] } | { reset { all | filter <f0> | trace | <s0> } } | { enable { inband | kernel | lcnd <i0> | process <i0> | trace } } | { list { filters <f0> | curr_tracer | all } } | { debug { on | off } } | { dump { all | traces } } ]

Syntax Description

ftrace

Run ftrace tool to enable/disable kernel/process tracing

set-opt

(Optional) Set ftrace tracing options available

reset

(Optional) Reset ftrace options to defaults, disable tracing

enable

(Optional) Enable ftrace tracing with given options

list

(Optional) List ftrace available options/filters/events

debug

(Optional) Ftrace based debug trace enable/disable

dump

(Optional) Dump traces collected in ftrace circular buffer

all

(Optional) Act on all available datasets

lcnd

(Optional) Trace proc/pid specific lcnd inband driver calls

inband

(Optional) Trace inband driver + netstack functions

kernel

(Optional) Trace kernel function of sched, net, inband

process

(Optional) Trace proc/pid specific kernel function calls

trace

(Optional) Enable tracing_on in ftrace settings

option

(Optional) Name of ftrace option to be set

filter

(Optional) Set ftrace filter to be applied

proc

(Optional) Set ftrace process to be traced

buf_size

(Optional) Set ftrace buffer size limits

filters

(Optional) list available ftrace filters

curr_tracer

(Optional) Print ftrace current tracer

traces

(Optional) Dump ftrace trace buffer contents

on

(Optional) Enable ftrace based debug tracing

off

(Optional) Dump ftrace trace buffer contents

i0

(Optional) pid of process to trace

f0

(Optional) name of ftrace filter to list/set

n0

(Optional) name of ftrace option to be set

v0

(Optional) value of ftrace option/filter to be set

p0

(Optional) pid of ftrace proc to be set

b0

(Optional) value of ftrace buffer size limit to set

s0

(Optional) name of ftrace option to be set/reset

Command Mode

  • /exec

Was this Document Helpful?

FeedbackFeedback

Contact Cisco