You can display
various QoS statistics for the device. By default, statistics are enabled, but
you can disable this feature. For more information, see the Configuration
Examples For Monitoring QoS Statistics section.
Monitoring QoS Statistics
statistics has the following prerequisites:
You must be
familiar with using modular QoS CLI.
You are logged on
to the device.
show commands with the
internal keyword are not supported.
interface command can display information about internal
The command format
for this information is specified asiix/y/z. Where
x is the module
y is the value
z is the
internal interface number within the module.
The number of
internal interfaces within a module varies based on the type of the linecard.
you can display information about internal interfaces by providing the module
number in the
command so that queuing information for both front-panel and internal
interfaces of a given module are displayed together.