New Commands
The following commands are added in this release.
-
show config-template [ [ <template-name> ] [ status [ { vrf <vrf-name> } ] ] ] [ __readonly__ { TABLE_profile <name> <refcount> <type> [ TABLE_cfg <cfg> ] [ TABLE_status <vrfname> <status> ] } ]
-
show consistency-checker vxlan l3-route <l3-route> vrf <vrf-string>
-
show consistency-checker vxlan pv
-
show consistency-checker vxlan unicast-nve-peers
-
show debug hw_telemetry
-
show debug segment-routing
-
show fte event [ name ] [ { <eventname> } ] [ __readonly__ <event> <description> <use_count> ]
-
show fte exporter [ name ] [ <exportername> ] [ __readonly__ <exporter> <description> <dest> <vrf> <vrf_id> <vrf_resolved> <dest_udp> <source_intf> <source_ip> ]
-
show fte internal ddb db [ __readonly__ <ddb_log_string> ]
-
show fte monitor [ name ] [ <monitorname> [ cache [ detailed ] ] ] [ __readonly__ <monitor> <use_count> <description> <record> <event> <exporter1> <exporter2> <bucket_id> <src_addr> <dest_addr> ]
-
show fte record [ name ] [ { <recordname> } | { fte-original } | { fte { protocol-port | layer2-switched { input } | { ipv4 | ipv6 | l2 } { original-input } } } ] [ __readonly__ <record> <description> <use_count> ]
-
show hardware internal biosflash model
-
show hardware internal tah mac <mac-addr> vlan <vlan-id> [ detail ]
-
show hw_telemetry ssx collector { all | <collectorname> }
-
show hw_telemetry ssx details
-
show hw_telemetry ssx monitor { all | <monitorname> }
-
show hw_telemetry ssx record { all | <recordname> }
-
show icam scale [ { { l2-switching [ mac-addresses | mst-instances | mst-vports | rpvst-vports | rpvst-vlans | vlans ] } | { multicast-routing [ multicast-routes | igmp-groups | pim-neighbors | outgoing-interfaces ] } | { unicast-routing [ bfd-sessions | eigrp-routes | ipv4-arp | ipv4-host-routes | ipv6-host-routes | ipv4-isis-routes | ospf-size ] } | { vxlan [ test ] } } ] [ history <num_intervals> | utilization | thresholds ] [ __readonly__ [ <Info_Thres> <Warn_Thres> <Crit_Thres> ] [ { TABLE_technology <Technology> [ { TABLE_feature <Feature> <Verified_Scale> <Config_Scale> [ { TABLE_feature_stats <Used_Entries> <Cur_Util> [ <Thres_Exceeded> <Polled_TS> ] [ <Avg_Util> ] [ <Week_Util> <Week_TS> ] [ <Peak_Util> <Peak_TS> ] [ <Info_Thres_Exceed> <Info_Thres_Exceed_TS> <Warn_Thres_Exceed> <Warn_Thres_Exceed_TS> <Crit_Thres_Exceed> <Crit_Thres_Exceed_TS> ] } ] } ] } ] ]
-
show isis [ <isis-tag> ] [ vrf { <vrf-name> | <vrf-known-name> | all } ] lslib [ cache [ nodes | links | prefixes | node <s0> | link <s1> | prefix <s2> | links-of-node <s3> | prefixes-of-node <s4> ] [ detail ] ] [ vrf { <vrf-name> | <vrf-known-name> | all } ]
-
show isis [ <isis-tag> ] distribute-ls { [ system-id <sid> ] | [ lsp-id <lid> ] } [ brief ] [ vrf { <vrf-name> | <vrf-known-name> | all } ] [ __readonly__ { TABLE_process_tag <process-tag-out> <vrf-name-out> <vrf-id-out> <lslib-connection-out> <client-type-out> <protocol-instance-out> <nxos-instance-out> <ha-recovery-out> [ <queue-all-out> ] <update-timer-sec-out> <update-timer-msec-out> <update-timer-running-out> [ <update-timer-due-in> ] [ { TABLE_process_lvl <level-out> <level-distributing-out> [ { TABLE_ls_node <node-id-out> <node-name-out> [ { TABLE_ls_lsp <lsp-id-out> <lsp-name-out> <lsp-purged-out> <node-grpid-out> <prefix-grpid-out> <link-grpid-out> <node-attr-bitfield-out> <node-flags-out> [ <attached-bit-out> ] [ <overloaded-bit-out> ] [ <area-id-out> ] [ <area-length-out> ] [ <name-out> ] [ <ipv4-id-out> ] [ { TABLE_srgb <number-out> <start-out> <size-out> } ] [ <sr-algo-count-out> ] [ { TABLE_sr_algo <algo-out> } ] [ { TABLE_ls_link <nbr-node-out> <local-ip-out> <remote-ip-out> <link-attr-bitfield-out> [ <metric-out> ] <local-ip-attr-out> <remote-ip-attr-out> [ <max-link-bw-out> ] [ <max-resv-bw-out> ] [ { TABLE_unresv_bw <number-out> <bw-out> } ] [ <metric-te-out> ] [ { TABLE-adj-sid <asid-out> <flag-out> <weight-out> } ] } ] [ { TABLE_ls_prefix <prefix-out> <prefix-len-out> <prefix-attr-bitfield-out> [ <metric-out> ] [ { TABLE-sid <sid-out> <algo-out> <flags-out> } ] } ] } ] } ] } ] } ]
-
show isis [ <isis-tag> ] internal queues urib-ulib
-
show isis [ <isis-tag> ] segment-routing local-mapcache [ vrf { <vrf-name> | <vrf-known-name> | all } ]
-
show isis [ <isis-tag> ] segment-routing mapcache [ level-1 | level-2 ] [ <ipv4-prefix> ] [ sid <sr-sid> ] [ vrf { <vrf-name> | <vrf-known-name> | all } ] [ __readonly__ { TABLE_process_tag <process-tag-out> { TABLE_vrf <vrf-name-out> <srmap-v4-state> <srmap-v6-state> [ { TABLE_srmap_level <srmap-level> [ { TABLE_srmap_pfxsid <srmap-pfxsid> <srmap-lsp-id> <srmap-pfxsid-valid> <srmap-pfxsid-flags> <srmap-prefix> } ] } ] } } ]
-
show isis [ <isis-tag> ] segment-routing remote-srgb [ vrf { <vrf-name> | <vrf-known-name> | all } ] [ __readonly__ { TABLE_process_tag <process-tag-out> { TABLE_vrf <vrf-name-out> <sr-v4-state> <sr-v6-state> [ { TABLE_srgb_lsp <srgb-level> <srgb-lspid> <srgb-num-entries> <srgb-flags> [ { TABLE_srgb_label <srgb-start-label> <srgb-range> } ] } ] } } ]
-
show isis [ <isis-tag> ] segment-routing sids [ vrf { <vrf-name> | <vrf-known-name> | all } ]
-
show logging level hw_telemetry
-
show logging level segment-routing
-
show processes cpu history data [ __readonly__ { [ TABLE_processes_cpu_history <cpu_avg_sec> ] } ]
-
show processes memory physical [ __readonly__ { TABLE_process_physical_memory <processid> <virtual> <physical> <rss> <processname> } ]
-
show routing [ ip | ipv4 ] multicast internal nbm pending-flow-cache
-
show routing [ ip | ipv4 ] multicast internal rpf-source retry-cache [ vrf { <vrf-name> | <vrf-known-name> | all } ]
-
show running-config config-template
-
show running-config hw_telemetry [ all ]
-
show running-config segment-routing [ all ]
-
show segment-routing [ detail ] [ __readonly__ <srvname> <state> <process_id> [ <srgb_min_label> <srgb_max_label> <srgb_alloc_status> [ <oper_srgb_min_label> <oper_srgb_max_label> ] <cleanup_intvl> <retry_intvl> [ <num_retries> ] [ <srgb_alloc_hdl> ] [ <cleanup_timer_state> <retry_timer_state> ] ] [ <ulib_reg_status> [ <ulib_pib_hdl> ] ] ]
-
show segment-routing clients [ __readonly__ [ { TABLE_client <client_pib_name> <client_pib_index> <client_uuid> <client_pid> <client_sap> [ { TABLE_tib <vrf_name> <tib_name> [ <pfxsid_cleanup_status> ] } ] } ] <total_clients> ]
-
show segment-routing internal event-history errors
-
show segment-routing internal event-history event
-
show segment-routing internal event-history msgs
-
show segment-routing internal mem-stats [ no-libs ] [ detail ]
-
show segment-routing internal { ipv4 | ipv6 } connected-prefix-sid-map
-
show segment-routing ipv4 connected-prefix-sid-map [ __readonly__ [ { TABLE_tib <vrf_name> <tib_name> [ { TABLE_pfxsid <prefix> <index> <absolute> <range> <valid> } ] } ] ]
-
show startup-config hw_telemetry [ all ]
-
show startup-config segment-routing [ all ]
-
show system config reload-pending [ __readonly__ { TABLE_reload_pending <cmds_list> } ]
-
show system internal aclqos info tapagg-db
-
show system internal fabric connectivity stats [ module <module> ]
-
show system internal fabric link-state { [ module <module> ] | all }
-
show system internal hw_telemetry details
-
show system internal hw_telemetry event-history debug
-
show system internal hw_telemetry event-history errors
-
show system internal hw_telemetry event-history msgs
-
show system internal hw_telemetry mem-stats [ detail ]
-
show system internal nbm flow rp-hash group <grp> [ source <src> ]
-
show system internal telemetry event collector batch [ all ]
-
show tech-support hw_telemetry
-
show tech-support segment-routing