Site Preparation and Maintenance Records

Site Preparation Checklist

Planning the location and layout of your equipment rack or cabinet is essential for successful switch operation, ventilation, and accessibility.

The following table lists the site planning tasks that we recommend that you complete before you install the switch. Your completion of each task ensures a successful switch installation.

Table 1 Site Preparation Checklist
Planning Activity Verification Time and Date

Space evaluation:

 
 

Space and layout

 

Floor covering

 

Impact and vibration

 

Lighting

 

Physical access

 

Maintenance access

 

Environmental evaluation:

 
 

Ambient temperature

 

Humidity

 

Altitude

 

Atmospheric contamination

 

Airflow

 

Power evaluation:

 
 

Input power type

Power receptacles

 

Receptacle proximity to the equipment

 

Dedicated (separate) circuits for power redundancy

 

UPS for power failures

 

Grounding: proper wire gauge and lugs

 

Circuit breaker size

 

Grounding evaluation:

 

Data center ground

 

Cable and interface equipment evaluation:

 

Cable type

 

Connector type

 

Cable distance limitations

 

Interface equipment (transceivers)

 

EMI evaluation:

 

Distance limitations for signaling

 

Site wiring

 

RFI levels

 

Contact and Site Information

Use the following worksheet to record contact and site information for the installation.

Contact person

Contact phone

Contact e-mail

Building/site name

Data center location

Floor location

Address (line 1)

Address (line 2)

City

State/Provence

Contact person

ZIP/postal code

Country

Chassis and Module Information

Use the following three worksheets to record information about the chassis and modules.

Table 2 Switch Information

Contract number

Chassis serial number

Product number

Table 3 Network-Related Information

Switch IP address

Switch IP netmask

Hostname

Domain name

IP broadcast address

Gateway/router address

DNS address

Table 4 Module Information for the Switch Chassis
Slot Module Type Module Serial Number Notes

Power supply 1 (left)

Power supply 2 (right)

Fan module 1 (left)

Fan module 2 (center left)

Fan module 3 (center right)

Fan module 4 (right)