high-performance host-netio (virtual Ethernet interface)
To turn on high performance on the host, use the high-performance host-netio command. To disable high performance, use the no form of this command.
high-performance host-netio
no high-performance host-netio
Syntax Description
This command has no arguments or keywords.
Command Default
Disabled
Command Modes
Virtual Ethernet interface configuration mode
Command History
Release |
Modification |
---|---|
6.0(2)N1(1) |
This command was introduced. |
Usage Guidelines
This command does not require a license.
Examples
This example shows how to enable high performance on the host:
switch# configure terminal
switch(config)# interface vethernet 1
switch(config-if)# high-performance host-netio
switch(config-if)#