default shutdown (virtual Ethernet interface)
To enable default commands on a virtual Ethernet interface, use the default shutdown command. To disable default commands, use the no form of this command.
default shutdown
no default shutdown
Syntax Description
This command has no arguments or keywords.
Command Default
None.
Command Modes
Virtual Ethernet interface configuration
Command History
Release |
Modification |
---|---|
6.0(2)N1(1) |
This command was introduced. |
Usage Guidelines
This command does not require a license.
Examples
This example shows how to enable a virtual Ethernet interface:
switch# configure terminal
switch(config)# interface vethernet 1
switch(config-if)# default shutdown
switch(config-if)#