Cisco Nexus 5600 Series NX-OS Quality of Service Configuration Guide, Release 7.x

Bias-Free Language

The documentation set for this product strives to use bias-free language. For the purposes of this documentation set, bias-free is defined as language that does not imply discrimination based on age, disability, gender, racial identity, ethnic identity, sexual orientation, socioeconomic status, and intersectionality. Exceptions may be present in the documentation due to language that is hardcoded in the user interfaces of the product software, language used based on RFP documentation, or language that is used by a referenced third-party product. Learn more about how Cisco is using Inclusive Language.

Book Contents

Find Matches in This Book

Results

Updated:: September 2, 2022

New and Changed Information

This chapter provides release-specific information for each new and changed feature in the Cisco Nexus 5600 Series NX-OS QoS Configuration Guide , Release 7.x.


Feature	Description	Changed in Release	Where Documented
FEX-Based ACL Classification	The FEX-Based ACL Classification feature uses TCAM resources on a FEX to perform ACL-based packet classification of incoming packets on the switch.	7.0(3)N1(1)	Configuring FEX-Based ACL Classification
Buffer Utilization Histogram	The Buffer Utilization Histogram feature allows you to analyze the maximum queue depths and buffer utilization in the system in real time. Instantaneous or real time buffer utilization information is supported.	7.0(2)N1(1)	Configuring Buffer Utilization Histogram

Was this Document Helpful?

Feedback

Contact Cisco

Open a Support Case
(Requires a Cisco Service Contract)