The documentation set for this product strives to use bias-free language. For the purposes of this documentation set, bias-free is defined as language that does not imply discrimination based on age, disability, gender, racial identity, ethnic identity, sexual orientation, socioeconomic status, and intersectionality. Exceptions may be present in the documentation due to language that is hardcoded in the user interfaces of the product software, language used based on RFP documentation, or language that is used by a referenced third-party product. Learn more about how Cisco is using Inclusive Language.
This appendix describes the conditions indicated by the chassis and module LEDs on the Cisco Nexus 5600 Series switches.
This section includes the following topics:
Table D-1 describes the chassis LEDs for the Cisco Nexus 5600 Series switches.
|
|
|
|
|
|
---|---|---|---|---|---|
Power supply failures, over voltage, over current, over temperature |
|||||
Table D-2 table describes the status of the two power supply LEDs
You can determine the power supply conditions by combining the LED states of the OK and FAIL LEDs (see Table D-2 ).
Table D-3 and Table D-4 describe the port LEDs for the Cisco Nexus 5624Q and 5648Q switches.
|
|
---|---|
|
|
---|---|
The Cisco Nexus 5624Q and 5648Q switches do not have separate LEDs to identify break out ports. If one or more break out ports are down, the port LED blinks green. When you enable beacon for port or interface, the port LED blinks alternating amber and green.