A
source port can be an Ethernet port, port channel, Fiber Channel ports, SAN
port channel, VLAN, or a VSAN port. It cannot be a destination port.
The
following example shows how to configure an Ethernet SPAN source port:
switch# configure terminal
switch(config)# monitor session 2
switch(config-monitor)# source interface ethernet 1/16
switch(config-monitor)#
The
following example shows how to configure a Fibre Channel SPAN source port:
switch# configure terminal
switch(config)# monitor session 2
switch(config-monitor)# source interface fc 2/1
switch(config-monitor)#
The following example shows how to configure
a virtual Fibre Channel SPAN source port:
switch# configure terminal
switch(config)# monitor session 2
switch(config-monitor)# source interface vfc 129
switch(config-monitor)#