and QoS configuration 1-11
configuring for FCoE COS 1-8
for FCoE 1-8
class-fcoe 1-8
class of service (COS) 1-12
and ETS 1-12
and PFC 1-12
DCB support 1-13
second generation 1-6
consolidated links 1-9, 1-10
benefits 1-10
consolidated vs dedicated links 1-9
default value and FCoE 1-12
Data Center Bridging eXchange (DCBX) 1-13
DCB Ethernet links 1-9
negotiation failure 1-14
dedicated links 1-9, 1-10
benefits 1-10
on Cisco Nexus 5000 Series switch 1-15
limitations 1-15
Enhanced Transmission Selection (ETS) 1-12
Ethernet NIC 1-6
default settings 1-12
FC-MAP 1-2
changing the FC-MAP value 1-2
default value 1-2
ranges 1-2
buffer allocation 1-8
enabling 1-2
enabling on VLAN 1 1-3
host disruptions 1-2
interoperability 1-14
and QoS configuration example 1-12
predefined QoS policies 1-11
QoS configuration 1-11
single-hop topology 1-14
best practice 1-3
configuring 1-3
host-facing 1-3
and STP 1-3, 1-4
configuration in a vPC 1-7
connecting to a VF port 1-3
difference from Ethernet VLANs 1-3
HBA 1-6
high availability (HA) 1-2
IEEE 802.1Q Data Center Bridging (DCB) standard 1-13
IEEE 802.1Q Enhance Ethernet Standards 1-12
IEEE 802.1Q standard 1-12
and FCoE 1-14, 1-15
link aggregation control protocol (LACP) 1-5
load balance 1-2
MST 1-4
fabric services 1-15
network disruptions 1-2
no-drop classes of service 1-12
thresholds 1-8
N-Port ID Virtualization (NPIV) 1-15
N-Port Virtualizer (NPV) 1-15
device benefits 1-15
NPIV requirement 1-15
changing to switch mode 1-15
requirement 1-15
class-of-service 1-12
default settings 1-12
lossless transport and dedicated bandwidth 1-12
FCoE policies 1-11
Priority Flow Control (PFC) 1-12
PVST 1-4
PVST+ 1-4
FCoE configuration 1-11
FCoE topology 1-14
Spanning Tree Protocol 1-3
and FCoE 1-15
and native fabric services 1-15
changing to NPV mode 1-15
Unified Port Controller (UPC) ASIC 1-10
first generation 1-10
second generation 1-10
VLAN configuration limit 1-11
unified ports 1-11
configuration requirements 1-11
in expansion modules 1-11
and FCoE 1-5
scalability 1-11
VLAN to VSAN mapping 1-3
connecting a host 1-5
Index
and QoS configuration 1-11
configuring for FCoE COS 1-8
for FCoE 1-8
class-fcoe 1-8
class of service (COS) 1-12
and ETS 1-12
and PFC 1-12
DCB support 1-13
second generation 1-6
consolidated links 1-9, 1-10
benefits 1-10
consolidated vs dedicated links 1-9
default value and FCoE 1-12
Data Center Bridging eXchange (DCBX) 1-13
DCB Ethernet links 1-9
negotiation failure 1-14
dedicated links 1-9, 1-10
benefits 1-10
on Cisco Nexus 5000 Series switch 1-15
limitations 1-15
Enhanced Transmission Selection (ETS) 1-12
Ethernet NIC 1-6
default settings 1-12
FC-MAP 1-2
changing the FC-MAP value 1-2
default value 1-2
ranges 1-2
buffer allocation 1-8
enabling 1-2
enabling on VLAN 1 1-3
host disruptions 1-2
interoperability 1-14
and QoS configuration example 1-12
predefined QoS policies 1-11
QoS configuration 1-11
single-hop topology 1-14
best practice 1-3
configuring 1-3
host-facing 1-3
and STP 1-3, 1-4
configuration in a vPC 1-7
connecting to a VF port 1-3
difference from Ethernet VLANs 1-3
HBA 1-6
high availability (HA) 1-2
IEEE 802.1Q Data Center Bridging (DCB) standard 1-13
IEEE 802.1Q Enhance Ethernet Standards 1-12
IEEE 802.1Q standard 1-12
and FCoE 1-14, 1-15
link aggregation control protocol (LACP) 1-5
load balance 1-2
MST 1-4
fabric services 1-15
network disruptions 1-2
no-drop classes of service 1-12
thresholds 1-8
N-Port ID Virtualization (NPIV) 1-15
N-Port Virtualizer (NPV) 1-15
device benefits 1-15
NPIV requirement 1-15
changing to switch mode 1-15
requirement 1-15
class-of-service 1-12
default settings 1-12
lossless transport and dedicated bandwidth 1-12
FCoE policies 1-11
Priority Flow Control (PFC) 1-12
PVST 1-4
PVST+ 1-4
FCoE configuration 1-11
FCoE topology 1-14
Spanning Tree Protocol 1-3
and FCoE 1-15
and native fabric services 1-15
changing to NPV mode 1-15
Unified Port Controller (UPC) ASIC 1-10
first generation 1-10
second generation 1-10
VLAN configuration limit 1-11
unified ports 1-11
configuration requirements 1-11
in expansion modules 1-11
and FCoE 1-5
scalability 1-11
VLAN to VSAN mapping 1-3
connecting a host 1-5