New and Changed Information
This chapter provides release-specific information for each new and changed feature in the Cisco Nexus 5000 Series NX-OS Fibre Channel over Ethernet Configuration Guide.
The latest version of this document is available at the following Cisco website:
http://www.cisco.com/en/US/products/ps9670/products_installation_and_configuration_guides_list.html
To check for additional information about Cisco NX-OS software, see the Cisco Nexus 5000 Series NX-OS Release Notes available at the following Cisco website:
http://www.cisco.com/en/US/products/ps9670/prod_release_notes_list.html
Documentation Organization
As of Cisco NX-OS Release 4.1(3)N2(1), the Nexus 5000 Series configuration information is available in new feature-specific configuration guides for the following information:
-
System Management
-
Layer 2 Switching
-
SAN Switching
-
Fibre Channel over Ethernet
-
Security
-
Quality of Service
The information in these new guides previously existed in the Cisco Nexus 5000 Series CLI Configuration Guide which remains available on Cisco.com and should be used for all software releases prior to Cisco Nexus 5000 NX-OS Software Rel 4.1(3). Each new configuration guide addresses the features that are introduced in or are available in a particular release. Select and view the configuration guide that pertains to the software installed in your switch.
The information in the new Cisco Nexus 5000 Series NX-OS Fibre Channel over Ethernet Configuration Guide previously existed in Part 5: Fibre Channel over Ethernet of the Cisco Nexus 5000 Series CLI Configuration Guide.