The documentation set for this product strives to use bias-free language. For the purposes of this documentation set, bias-free is defined as language that does not imply discrimination based on age, disability, gender, racial identity, ethnic identity, sexual orientation, socioeconomic status, and intersectionality. Exceptions may be present in the documentation due to language that is hardcoded in the user interfaces of the product software, language used based on RFP documentation, or language that is used by a referenced third-party product. Learn more about how Cisco is using Inclusive Language.
Cisco Fibre Channel (FC) zone driver performs zoning operations through Secure Shell (SSH).
System Requirement:
You can configure the Cisco FC zone driver and lookup service by specifying the following parameters:
Table 1 Configuration Options for zoning_manager
Cisco recommends that you configure the storage area network (SAN) fabric parameters as fabric groups, shown in the following example:
|
|
---|---|
Note The Cisco Fibre Channel Zone Driver supports basic and enhanced zoning modes. The zoning VSAN must exist with an active zone set name which is same as the fc_fabric_names parameter.