New and Changed Information
The following table provides an overview of the significant changes to this guide up to this current release. The table does not provide an exhaustive list of all changes made to the guide or of the new features up to this release.
Cisco APIC Release Version |
Feature |
Description |
Where Documented |
---|---|---|---|
4.2(1) |
Run Bond Watch Service from Heat template |
When integrating Cisco UCS B-Series to work with Cisco ACI and OpenStack orchestration, you can run the bond watch service by enabling a parameter to the Heat template. The parameter ACIEnableBondWatchService enables the |
|
4.2(1) |
OpenStack Director deployments can now use certificate-based authentication with Cisco ACI. |
Add the ACIApicCertName and ACIApicPrivateKey parameters to the Heat template to enable certificate-based authentication for Cisco ACI. |
|
4.2(1) |
Automatic purge of the tenant from Cisco ACI when a project is deleted from OpenStack |
Setting the parameter AciKeystoneNotificationPurge to True enables Keystone notification purge. |
|
N/A |
Configuration of UCS B-Series for Cisco ACI and OpenStack Orchestration |
Added appendix about configuring UCS B-Series for Cisco ACI and OpenStack orchestration. | Configuring UCS B-Series |
2.3(1) |
-- |
Added how to add an OpenStack external network. |
For more information, see Adding an OpenStack External Network. |
2.3(1) |
-- |
Added support for multiple physnets. |
For more information, see Installing Overcloud. |
2.3(1) |
-- |
Added upgrade procedures. |
For more information, see: |
2.3(1) |
-- |
Added information about bonded fabric interface with vPC. |
For more information, see Requirements and Prerequisites for Cisco ACI with OpenStack Using OSP Director. |
2.3(1) |
Uses tripleo composable services that are introduced in the Newton release. |
This guide was released. |
-- |