The documentation set for this product strives to use bias-free language. For the purposes of this documentation set, bias-free is defined as language that does not imply discrimination based on age, disability, gender, racial identity, ethnic identity, sexual orientation, socioeconomic status, and intersectionality. Exceptions may be present in the documentation due to language that is hardcoded in the user interfaces of the product software, language used based on RFP documentation, or language that is used by a referenced third-party product. Learn more about how Cisco is using Inclusive Language.
This chapter contains the following sections:
The following table provides an overview of the significant changes to this guide up to this current release. The table does not provide an exhaustive list of all changes made to the guide or of the new features up to this release.
Cisco APIC Release Version |
Feature |
Description |
Where Documented |
---|---|---|---|
Release 1.3(x) |
No significant changes |
-- |
-- |
Release 1.2(2g) |
-- |
Support for IPv6 management address provisioning or through a policy on the APIC controller. |
This content is available in the Initial POD Setup and Overview and with in-band and out-of-band configuration examples. Additional support for DNS and NTP policies. |
Release 1.2(1i) |
Basic GUI |
Introduced the Basic GUI mode in the APIC GUI |
This content is available in the chapter Using the Basic GUI. |
Release 1.2(1i) |
NX-OS style CLI |
Introduced the NX-OS style CLI in the release. |
This content is available in Using the NX-OS Style CLI |