QoS for L3Outs
To configure QoS policies for an L3Out, use the following guidelines:
-
To configure the QoS policy to be enforced on the border leaf where the L3Out is located, the VRF must be in egress mode (Policy Control Enforcement Direction must be "Egress").
-
To enable the QoS policy to be enforced, the VRF Policy Control Enforcement Preference must be "Enforced."
-
When configuring the contract governing communication between the L3Out and other EPGs, include the QoS class or Target DSCP in the contract or subject.
Note |
Only configure a QoS class or target DSCP in the contract, not in the external EPG ( |