Cisco Smart+Connected Spaces Mobile Application User Guide
Bias-Free Language
The documentation set for this product strives to use bias-free language. For the purposes of this documentation set, bias-free is defined as language that does not imply discrimination based on age, disability, gender, racial identity, ethnic identity, sexual orientation, socioeconomic status, and intersectionality. Exceptions may be present in the documentation due to language that is hardcoded in the user interfaces of the product software, language used based on RFP documentation, or language that is used by a referenced third-party product. Learn more about how Cisco is using Inclusive Language.
- Updated:
- February 23, 2015
Chapter: Locating Buildings
Locating Buildings
This chapter describes how you can use the Cisco Smart+Connected Spaces (Smart Spaces) mobile application to locate a building of an enterprise and view its details.
Locating a Building
To locate a building, perform the following steps:
Step 1
Log in to the Smart Spaces mobile application.
The Smart Spaces home screen appears.
Step 2 Tap the Buildings 
icon.
The Buildings screen displays the following:
By default, the map screen is displayed, which shows the buildings of an enterprise. The buildings are marked as red pins in a map. To view the details of any building, tap the building in the map. A dialog box is displayed with the building name, tap on the dialog box to see the building details.
Viewing the Building Details
You can view the building details by tapping on the building in the list of buildings either on the Map tab or List tab. The building details screen displays the following details:
- Address of the building
- Number of Offices on each floor
- Number of Workspaces each floor
- Number of Conference Rooms on each floor
You can view the map of the floor by tapping the locate icon that is displayed for each floor.
Feedback