The documentation set for this product strives to use bias-free language. For the purposes of this documentation set, bias-free is defined as language that does not imply discrimination based on age, disability, gender, racial identity, ethnic identity, sexual orientation, socioeconomic status, and intersectionality. Exceptions may be present in the documentation due to language that is hardcoded in the user interfaces of the product software, language used based on RFP documentation, or language that is used by a referenced third-party product. Learn more about how Cisco is using Inclusive Language.
This chapter provides a holistic information on all the key tasks that you can perform using the following solutions of the Cisco Smart+Connected Digital Signage (Smart+Connected DS) application:
•Cisco Smart+Connected Emergency Notification (Smart+Connected EN)
•Cisco Smart+Connected Information Signage (Smart+Connected IS)
•Cisco Smart+Connected Green Advisor (Smart+Connected GA)
You can also easily navigate to the sections that provide information on all sub-tasks that need to be performed in order to achieve the key tasks.
•Sending Emergency Incident Messages on the Digital Signage/IEC
•Sending Emergency Incident Messages on IP Phones
|
|
|
---|---|---|
1 |
Import the CUCM certificate for the Cisco IP phone. |
"Importing SSL Certificates" section in the Cisco Smart+Connected Meeting Spaces & Cisco Smart+Connected Digital Signage Installation Guide |
2 |
Create location(s)1 as required in the location hierarchy. |
"Adding Locations" section in the Cisco Smart+Connected Meeting Spaces & Cisco Smart+Connected Digital Signage Installation Guide |
3 |
Create a device `IP phone' for the location(s). |
"Adding Devices" section in the Cisco Smart+Connected Meeting Spaces & Cisco Smart+Connected Digital Signage Installation Guide |
4 |
Configure adapter properties for IP phone Bean in the database to display the emergency incident message on IP phone. |
"Configuring Adapter Properties" section in the Cisco Smart+Connected Meeting Spaces & Cisco Smart+Connected Digital Signage Installation Guide |
5 |
Set up content for the Cisco IP phone |
1 Locations can be mean either conference rooms, floor plan, or a building. |
•Displaying Meeting Details on the Floor Plan Display
•Displaying Meeting Room Details on the Conference Room Plan Display
•Displaying Meeting Room Details in Building View
•Displaying News Content on the Digital Signage/IEC
•Displaying External Content on the Digital Signage/IEC
•Adding Sequence to Signage Content using DMM
Note There should be no entry of ADAPTER_INSTANCE_ID of the DMP Bean (5004) in the adapter tables of the database, if the DMM adaptor is to be used.'
•Displaying Green Advisor Content on the Digital Signage/IEC
•Displaying the Telepresence Content