Cisco Video Surveillance 7070 IP Camera Installation Guide
Bias-Free Language
The documentation set for this product strives to use bias-free language. For the purposes of this documentation set, bias-free is defined as language that does not imply discrimination based on age, disability, gender, racial identity, ethnic identity, sexual orientation, socioeconomic status, and intersectionality. Exceptions may be present in the documentation due to language that is hardcoded in the user interfaces of the product software, language used based on RFP documentation, or language that is used by a referenced third-party product. Learn more about how Cisco is using Inclusive Language.
- Updated:
- July 17, 2015
Chapter: Index
Index
About link 4-2
ActiveX controls 4-2
brightness 4-8
See IP camera
camera settings, controls in Camera Video/Control window 4-7
accessing 4-4
description 4-2
displaying 4-2
for the first time 3-1
PC requirements for 3-1
contrast 4-8
DHCP, obtaining IP address through 3-1
factory reset 4-3
focus and zoom controls 4-12
help, for IP camera windows 4-2
description 4-2
displaying 4-1
HTTP, allowing access through 3-2
installing IP camera 2-3
default for IP camera 3-1
obtaining from DCHP server 3-1
accessing through a web browser 3-1
connecting to for the first time 3-1
installation 2-3
logging out of 4-2
powering off 4-3
powering on 4-3
windows 4-2
through home window 4-4
through third-party device or software 4-4
See also video
log out, of IP camera 4-2
controls 4-11, 4-14
enabling 4-11
sensitivity 4-12
mounting to ceiling, wall, or table 2-3
password, requirements for 3-2
powering off the IP camera 4-3
powering on the IP camera 4-3
Power over Ethernet (PoE) 2-1
Power over Ethernet (PoE) 2-1
rebooting, IP camera 4-3
Refresh link 4-1
factory default values 4-3
reboot 4-3
saturation 4-8
description 4-2
displaying 4-2
sharpness 4-8
codec, controls in Camera Video/Control window 4-4
resolution, controls in Camera Video/Control window 4-4
through Home window 4-4
through third-party device or software 4-4
See also live video
View Video link 4-2
Index
About link 4-2
ActiveX controls 4-2
brightness 4-8
See IP camera
camera settings, controls in Camera Video/Control window 4-7
accessing 4-4
description 4-2
displaying 4-2
for the first time 3-1
PC requirements for 3-1
contrast 4-8
DHCP, obtaining IP address through 3-1
factory reset 4-3
focus and zoom controls 4-12
help, for IP camera windows 4-2
description 4-2
displaying 4-1
HTTP, allowing access through 3-2
installing IP camera 2-3
default for IP camera 3-1
obtaining from DCHP server 3-1
accessing through a web browser 3-1
connecting to for the first time 3-1
installation 2-3
logging out of 4-2
powering off 4-3
powering on 4-3
windows 4-2
through home window 4-4
through third-party device or software 4-4
See also video
log out, of IP camera 4-2
controls 4-11, 4-14
enabling 4-11
sensitivity 4-12
mounting to ceiling, wall, or table 2-3
password, requirements for 3-2
powering off the IP camera 4-3
powering on the IP camera 4-3
Power over Ethernet (PoE) 2-1
Power over Ethernet (PoE) 2-1
rebooting, IP camera 4-3
Refresh link 4-1
factory default values 4-3
reboot 4-3
saturation 4-8
description 4-2
displaying 4-2
sharpness 4-8
codec, controls in Camera Video/Control window 4-4
resolution, controls in Camera Video/Control window 4-4
through Home window 4-4
through third-party device or software 4-4
See also live video
View Video link 4-2
Feedback