Configure the sensor application
without SSD
![]() Note |
In this section, "CCVSensor" is used as the appid. |
Procedure
Step 1 |
Connect to the Cisco IR8340 through SSH or a console. |
Step 2 |
Configure the application payload by typing the following commands:
|
with SSD
![]() Note |
In this section, "CCVSensor" is used as the appid. |
Procedure
Step 1 |
Connect to the Cisco IR8340 through SSH or a console. |
Step 2 |
Configure the application payload by typing the following commands:
|