IP Addresses and Services Command Reference for Cisco ASR 9000 Series Routers

clear lpts ifib statistics

To clear the Internal Forwarding Information Base (IFIB) statistics, use the clear lpts ifib statistics command in EXEC mode.

clear lpts ifib statistics [location node-id]

Syntax Description


location `node-id`	(Optional) Clears the IFIB statistics for the designated node. The `node-id` argument is entered in standard rack/slot/module notation.

Command Default

No default behavior or values

Command Modes

EXEC mode

Command History


Release	Modification
Release 3.7.2	This command was introduced.

Usage Guidelines

If you do not specify a node with the location keyword and node-id argument, the clear lpts ifib statistics command clears the IFIB statistics for the node on which the command is run.

Task ID


Task ID	Operations
lpts	execute

Examples

The following example shows how to clear the IFIB statistics for the RP:



RP/0/RSP0/CPU0:router# clear lpts ifib statistics

Related Commands


Command	Description
show lpts ifib statistics	Displays the LPTS IFIB statistics.

clear lpts pifib hardware statistics

To clear the Pre-Internal Forwarding Information Base (Pre-IFIB) hardware statistics, use the clear lpts pifib hardware statistics command in EXEC mode.

clear lpts pifib hardware statistics location node-id

Syntax Description


location `node-id`	Clears the Pre-IFIB hardware statistics for the designated node. The `node-id` argument is entered in the rack/slot/module notation.

Command Default

No default behavior or values

Command Modes

EXEC mode

Command History


Release	Modification
Release 3.7.2	This command was introduced.

Usage Guidelines

If you do not specify a node with the location keyword and node-id argument, this command clears the Pre-IFIB hardware statistics for the node on which the command is run.

Task ID


Task ID	Operations
lpts	execute

Examples

The following example shows how to display the sample output from the show lpts hardware police command and then clears the Pre-IFIB hardware statistics for the RP:



RP/0/RSP0/CPU0:router# show lpts pifib hardware police location 0/1/CPU0

-------------------------------------------------------------
                Node 0/1/CPU0:
-------------------------------------------------------------
 Burst = 100ms for all flow types 
-------------------------------------------------------------
FlowType               Policer Type    Cur. Rate  Def. Rate  Accepted             Dropped             
---------------------- ------- ------- ---------- ---------- -------------------- --------------------
unconfigured-default   100     Static  2500       2500       0                    0                   
Fragment               101     Static  2500       2500       0                    0                   
OSPF-mc-known          102     Static  1500       1500       0                    0                   
OSPF-mc-default        103     Static  2000       2000       0                    0                   
OSPF-uc-known          104     Static  1000       1000       0                    0                   
OSPF-uc-default        105     Static  2000       2000       0                    0                   
ISIS-known             143     Static  1500       1500       0                    0                   
ISIS-default           144     Static  2000       2000       0                    0                   
BGP-known              106     Static  1500       1500       0                    0                   
BGP-cfg-peer           107     Static  2000       2000       0                    0                   
BGP-default            108     Static  2500       2500       0                    0                   
PIM-mcast              109     Static  2000       2000       0                    0                   
PIM-ucast              110     Static  1500       1500       0                    0                   
IGMP                   111     Static  500        500        0                    0                   
ICMP-local             112     Static  1500       1500       0                    0                   
ICMP-app               112     Static  1500       1500       0                    0                   
na                     140     Static  1000       1000       0                    0                   
ICMP-default           112     Static  1500       1500       0                    0                   
LDP-TCP-known          113     Static  1500       1500       0                    0                 


RP/0/RSP0/CPU0:router# show lpts pifib hardware police location 0/2/CPU0


-------------------------------------------------------------
                Node 0/2/CPU0:
-------------------------------------------------------------
 Burst = 100ms for all flow types 
-------------------------------------------------------------
FlowType               Policer Type    Cur. Rate  Def. Rate  Accepted   Dropped   
---------------------- ------- ------- ---------- ---------- ---------- ----------
unconfigured-default   100     Static  500        500        0          0         
Fragment               106     Static  1000       1000       0          0         
OSPF-mc-known          107     Static  20000      20000      4285       0         
OSPF-mc-default        111     Static  5000       5000       1          0         
OSPF-uc-known          161     Static  5000       5000       0          0         
OSPF-uc-default        162     Static  1000       1000       0          0         
ISIS-known             108     Static  20000      20000      0          0         
ISIS-default           112     Static  5000       5000       0          0         
BGP-known              113     Static  25000      25000      891        0         
BGP-cfg-peer           114     Static  10000      10000      6          0         
BGP-default            115     Static  10000      10000      2          0         
PIM-mcast              116     Static  23000      23000      0          0         
PIM-ucast              117     Static  10000      10000      0          0         
IGMP                   118     Static  3500       3500       0          0         
ICMP-local             119     Static  2500       2500       0          0         
ICMP-app               120     Static  2500       2500       0          0 


RP/0/RSP0/CPU0:router# clear lpts pifib hardware statistics location 0/2/CPU0

Clear "show controllers statistics" counters on this location [confirm]

RP/0/RSP0/CPU0:router# show lpts pifib hardware police location 0/2/CPU0

-------------------------------------------------------------
                Node 0/2/CPU0:
-------------------------------------------------------------
 Burst = 100ms for all flow types 
-------------------------------------------------------------
FlowType               Policer Type    Cur. Rate  Def. Rate  Accepted   Dropped   
---------------------- ------- ------- ---------- ---------- ---------- ----------
unconfigured-default   100     Static  500        500        0          0         
Fragment               106     Static  1000       1000       0          0         
OSPF-mc-known          107     Static  20000      20000      14         0         
OSPF-mc-default        111     Static  5000       5000       0          0         
OSPF-uc-known          161     Static  5000       5000       0          0         
OSPF-uc-default        162     Static  1000       1000       0          0         
ISIS-known             108     Static  20000      20000      0          0         
ISIS-default           112     Static  5000       5000       0          0         
BGP-known              113     Static  25000      25000      1          0         
BGP-cfg-peer           114     Static  10000      10000      0          0         
BGP-default            115     Static  10000      10000      0          0         
PIM-mcast              116     Static  23000      23000      0          0         
PIM-ucast              117     Static  10000      10000      0          0         
IGMP                   118     Static  3500       3500       0          0         
ICMP-local             119     Static  2500       2500       0          0         
ICMP-app               120     Static  2500       2500       0          0

Related Commands


Command	Description
show lpts pifib hardware police	Displays the policer configuration value set.

clear lpts pifib statistics

To clear the Pre-Internal Forwarding Information Base (Pre-IFIB) statistics, use the clear lpts pifib statistics command in EXEC mode.

clear lpts pifib statistics [location node-id]

Syntax Description


location `node-id`	Clears the Pre-IFIB statistics for the designated node. The `node-id` argument is entered in the rack/slot/module notation.

Command Default

No default behavior or values

Command Modes

EXEC mode

Command History


Release	Modification
Release 3.7.2	This command was introduced.

Usage Guidelines

If you do not specify a node with the location keyword and node-id argument, this command clears the Pre-IFIB statistics for the node on which the command is run.

Task ID


Task ID	Operations
lpts	execute

Examples

The following example shows how to clear the Pre-IFIB statistics for the RP:



RP/0/RSP0/CPU0:router# clear lpts pifib statistics

Related Commands


Command	Description
show lpts pifib statistics	Displays the LPTS PIFIB statistics.

flow (LPTS)

To configure the policer for the Local Packet Transport Services (LPTS) flow type, use the flow command in pifib policer global configuration mode or pifib policer per-node configuration mode. To disable this feature, use the no form of this command.

flow flow-type rate rate

no flow flow-type rate rate

Syntax Description


flow-type	List of supported flow types.
rate `rate`	Specifies the rate in packets per seconds (PPS). The range is from 0 to 4294967295.

Command Default

The default behavior is to load the policer values from the static configuration file that is platform dependant.

Command Modes

Pifib policer global configuration

Pifib policer per-node configuration

Command History


Release	Modification
Release 3.7.2	This command was introduced.

Usage Guidelines

The table lists the supported flow types and the parameters that are used to define a policer.

This table lists the supported flow types and the parameters that are used to define a policer.

Table 1. List of Supported Flow Types
Flow Type	Description	Default Packet Rate (Recommended)
all-routers	Packets sent to all-routers multicast addresses, which include multicast LDP UDP packet.	1000
bgp-cfg-peer	Packets from a configured BGP peer.	2000
bgp-default	Packets from unconfigured, newly configured, or wildcard BGP peers.	2500
bgp-known	Packets from established BGP peering sessions.	1500
css-default	Packets from a new or newly established CSS session.	200
css-known	Packets from an established CSS session.	200
default-flow	Default flow type.	2500
eigrp	EIGRP packets for configured interfaces.	1500
gre	Generic Routing Encapsulation packets	1000
fragment	Fragmented packets.	2500
http-default	Packets from a new or newly established HTTP session.	400
http-known	Packets from an established HTTP session.	200
icmp-app	ICMP or ICMPv6 packets of interest to applications.	1500
icmp-default	Other ICMP or ICMPv6 packets.	1500
icmp-local	ICMP or ICMPv6 packets with local interest.	1500
igmp	IGMP packets.	500
ike	IKE packets.	100
ipsec-default	AH or ESP packets with unknown or newly configured SPIs.	100
ipsec-known	AH or ESP packets with known SPIs.	400
ip-sla	IP SLA packets (this is a hidden flow type)	1000
isis-default	IS-IS packets for unconfigured (or newly, configured) interfaces.	2000
isis-known	IS-IS packets for configured interfaces.	1500
ldp-tcp-cfg-peer	Packets from a configured LDP TCP peer (SYNs or newly, established sessions).	2000
ldp-tcp-default	Packets from an unconfigured, newly configured, or wildcard LDP TCP peer.	2500
ldp-tcp-known	Packets from an established LDP peering session.	1500
ldp-udp	Unicast LDP UPD packets.	2000
lmp-tcp-cfg-peer	Packets from a configured LMP TCP peer (SYNs or newly established sessions).	2000
lmp-tcp-default	Packets from an unconfigured, newly configured, or wild-card LMP TCP peer.	2500
lmp-tcp-known	Packets from an established LMP peering session.	1500
lmp-udp	Unicast LMP UDP packets.	2000
msdp-cfg-peer	Packets from a configured MSDP peer.	200
msdp-default	Packets from an unconfigured, newly configured, or wildcard MSDP peer.	300
msdp-known	Packets from an established MSDP session.	100
multicast-default	Packets for unconfigured or newly configured multicast groups.	2500
multicast-known	Packets for configured multicast groups.	2000
ntp-known	Packets from an established NTP session.	500
ntp-default	Packets from a new or newly established NTP session.	500
ospf-mc_default	OSPF multicast packets for unconfigured (or newly configured) interfaces.	2000
ospf-mc-known	OSPF multicast packets for configured interfaces.	1500
ospf-uc-default	OSPF unicast packets for unconfigured (or newly configured) interfaces.	2000
ospf-uc-known	OSPF unicast packets for configured interfaces.	1000
pim-multicast	PIM multicast packets.	2000
pim-unicast	PIM unicast packets.	1500
rip	RIP packets.	1500
rsh-default	Packets from a new or newly established RSH session.	200
rsh-known	Packets from an established RSH session.	200
rsvp	RSVP packets.	2000
rsvp-udp	RSVP UDP packets.	2000
raw-default	Packets for unconfigured or newly configured IPv4 or IPv6 protocols.	2500
raw-listen	Packets for configured IP protocols.	2500
shttp-default	Packets from a new or newly established SSHTP session.	400
shttp-known	Packets from an established SHTTP session.	200
snmp	SNMP packets.	300
ssh-default	Packets from a new or newly established SSH session.	300
ssh-known	Packets from an established SSH session.	200
tcp-cfg-peer	Packets for configured TCP peers.	2000
tcp-default	Packets for unconfigured or newly configured TCP services.	2500
tcp-known	Packets for established TCP sessions.	2000
tcp-listen	Packets for configured TCP services.	2500
telnet-default	Packets from a new or newly established Telnet session.	200
telnet-known	Packets from an established Telnet session.	200
udp-cfg-peer	Packets for configured UDP-based protocol sessions.	2500
udp-default	Packets for unconfigured or newly configured UDP services.	2500
udp-known	Packets for established UDP sessions.	2000
udp-listen	Packets for configured UDP services.	2500

Task ID


Task ID	Operations
config-services	read, write

Examples

The following example shows how to configure the LPTS policer for the bgp-known flow type for all line cards:



RP/0/RSP0/CPU0:router# configure
RP/0/RSP0/CPU0:router(config)# lpts pifib hardware police
RP/0/RSP0/CPU0:router(config-pifib-policer-global)# flow bgp-known rate 20000

The following example shows how to configure LPTS policer for the Intermediate System-to-Intermediate System (IS-IS)-known flow type for a specific line card:



RP/0/RSP0/CPU0:router# configure
RP/0/RSP0/CPU0:routerconfig)# lpts pifib hardware police location 0/2/CPU0
RP/0/RSP0/CPU0:router(config-pifib-policer-per-node)# flow isis-known rate 22222

lpts pifib hardware police

To configure the ingress policers and to enter pifib policer global configuration mode or pifib policer per-node configuration mode, use the lpts pifib hardware police command in Global Configuration mode. To set the policer to the default value, use the no form of this command.

To map the LPTS policer with an ACL, use the lpts pifib hardware police acl

command in Global Configuration mode.

lpts pifib hardware police [acl acl-name rate rate[vrf vrf-name] ] [location node-id]np np-number [ flow flow-type{default | known}[rate rate] [ precedence { number| name} ]]

no lpts pifib hardware police [acl acl-name [ vrf vrf-name] ] [location node-id]np np-number [ flow flow-type{default | known}[rate rate] [ precedence { number| name} ]]

Syntax Description


location `node-id`	(Optional) Designated node. The `node-id` argument is entered in the rack/slot/module notation.
flow `flow-type` rate `rate`	LPTS flow type and the policer rate in packets per second (PPS).
default	Indicates generic flows which are policed with default-rate. For example, BGP (*, 179), any packet with port:179 policed with default rate.
known	Indicates specific flows which are policed with known-rate.
acl `acl-name`	(Optional) Maps the LPTS policer with an ACL. The argument acl-name specifies pre Internal Forwarding Information Base access list name.
vrf`vrf-name`	(Optional) Specifies VPN routing and forwarding (VRF) instance.
precedence `{` `number\|` `name}`	Sets Type of Service (TOS) precedence value. You can specify either a precedence number or precedence name. The range of argument number is between 0 to 7. The name argument has following keywords: routine—Match packets with routine precedence ( 0) priority—Match packets with priority precedence (1) immediate—Match packets with immediate precedence (2) flash—Match packets with flash precedence (3) flash-override—Match packets with flash override precedence (4) critical—Match packets with critical precedence (5) internet—Match packets with internetwork control precedence (6) network—Match packets with network control precedence (7) You can configure the IP precedence for a specific node or globally for all nodes.
np `np-number`	Specifies network processor (NP) based policer in LPTS.

Command Modes

Global Configuration mode

Command History


Release	Modification
Release 3.7.2	This command was introduced.
Release 4.2.0	New flow types such as dns, radius, tacacs, ntp known, rsvp known and pim multicast known flow types were added.
Release 4.3.1	The precedence keyword was added.
Release 5.2.2	The acl and vrf keywords were added as part of ACL based policer feature.
Release 5.3.2	The np `np-number` keyword was added.

Usage Guidelines

No specific guidelines impact the use of this command.

Task ID


Task ID	Operations
lpts	read, write
config-services	read, write

Examples

This example shows how to configure the lpts pifib hardware police command for all line cards:



RP/0/RSP0/CPU0:router(config)# lpts pifib hardware police
RP/0/RSP0/CPU0:router(config-pifib-policer-global)#

This example shows how to configure the lpts pifib hardware police command for a specific line card:



RP/0/RSP0/CPU0:router# configure
RP/0/RSP0/CPU0:router(config)# lpts pifib hardware police location 0/2/CPU0 flow dns rate 10

This example shows how to configure the TOS precedence globally (applies to all line cards at once) using the lpts pifib hardware police command:


RP/0/RSP0/CPU0:router# configure
RP/0/RSP0/CPU0:router(config)# lpts pifib hardware police flow telnet default precedence internet network

This example shows how to configure the TOS precedence for the 0/2/CPU0 location using the lpts pifib hardware police command:


RP/0/RSP0/CPU0:router# configure
RP/0/RSP0/CPU0:router(config)# lpts pifib hardware police location 0/2/CPU0 flow telnet default precedence 5 3 6

This example shows how to configure ACL based policer:

RP/0/RSP0/CPU0:router# configure
RP/0/RSP0/CPU0:router(config)# lpts pifib hardware police acl acl_name1 rate 100 vrf vrf1

Related Commands


Command	Description
flow (LPTS)	Configures the policer for the LPTS flow type.
show lpts pifib hardware police	Displays the policer configuration value set.

show lpts bindings

To display the binding information in the Port Arbitrator, use the show lpts bindings command in EXEC mode.

show lpts bindings [location node-id] [client-id {clnl | ipsec | ipv4-io | ipv6-io | mpa | tcp | test | udp | raw}] [brief] [vrf vrf-name]

Syntax Description


location `node-id`	(Optional) Displays information for the specified node. The `node-id` argument is entered in the rack/slot/module notation.
client-id	(Optional) Type of client. It can be one of the following values: clnl —ISO connectionless protocol (used by IS-IS) ipsec —Secure IP ipv4-io —Traffic processed by the IPv4 stack ipv6-io —Traffic processed by the IPv6 stack mpa —Multicast Port Arbitrator (multicast group joins) tcp —Transmission Control Protocol test —Test applications udp —User Datagram Protocol raw —Raw IP
brief	(Optional) Displays summary output.
vrf `vrf-name`	(Optional) Name of assigned VRF.

Command Default

No default behavior or values

Command Modes

EXEC mode

Command History


Release	Modification
Release 3.7.2	This command was introduced.

Usage Guidelines

The show lpts bindings command displays the Local Packet Transport Services (LPTS) bindings (requests to receive traffic of a particular type). Bindings are aggregated into flows by the LPTS Port Arbitrator; flows are then programmed into the Internal Forwarding Information Base (IFIB) and Pre-IFIB to direct packets to applications.

If you specify the optional client-id keyword and type of client, only bindings from that client are shown. If you specify the optional location keyword and node-id argument, only bindings from clients on that node are displayed.

Task ID


Task ID	Operations
lpts	read

Examples

The following sample output is from the show lpts bindings command, displaying bindings for all client ID types:


RP/0/RSP0/CPU0:router# show lpts bindings

@ - Indirect binding; Sc - Scope

------------------------------------------
Location   :0/1/CPU0
Client ID  :IPV4_IO
Cookie     :0x00000001
Clnt Flags :
Layer 3    :IPV4
Layer 4    :ICMP
Local Addr :any
Remote Addr:any
Local Port :any
Remote Port:any
Filters    :Type / Intf or Pkt Type / Source Addr / Location
 INCLUDE_TYPE / type 8
 INCLUDE_TYPE / type 13
 INCLUDE_TYPE / type 17
------------------------------------------
Location   :0/2/CPU0
Client ID  :IPV4_IO
Cookie     :0x00000001
Clnt Flags :
Layer 3    :IPV4
Layer 4    :ICMP
Local Addr :any
Remote Addr:any
Local Port :any
Remote Port:any
Filters    :Type / Intf or Pkt Type / Source Addr / Location
 INCLUDE_TYPE / type 8
 INCLUDE_TYPE / type 13
 INCLUDE_TYPE / type 17
------------------------------------------
Location   :0/RP1/CPU0
Client ID  :TCP
Cookie     :0x4826f1f8
Clnt Flags :REUSEPORT
Layer 3    :IPV4
Layer 4    :TCP
Local Addr :any
Remote Addr:any
Local Port :7
Remote Port:any
------------------------------------------
Location   :0/RP1/CPU0
Client ID  :TCP
Cookie     :0x4826fa0c
Clnt Flags :REUSEPORT
Layer 3    :IPV4
Layer 4    :TCP
Local Addr :any
Remote Addr:any
Local Port :9
Remote Port:any
------------------------------------------
Location   :0/RP1/CPU0
Client ID  :TCP
Cookie     :0x482700d0
Clnt Flags :REUSEPORT
Layer 3    :IPV4
Layer 4    :TCP
Local Addr :any
Remote Addr:any
Local Port :19
Remote Port:any
------------------------------------------
Location   :0/RP1/CPU0
Client ID  :IPV4_IO
Cookie     :0x00000001
Clnt Flags :
Layer 3    :IPV4
Layer 4    :ICMP
Local Addr :any
Remote Addr:any
Local Port :any
Remote Port:any
Filters    :Type / Intf or Pkt Type / Source Addr / Location
 INCLUDE_TYPE / type 8
 INCLUDE_TYPE / type 13
 INCLUDE_TYPE / type 17

This table describes the significant fields shown in the display.

Table 2. show lpts bindings Command Field Descriptions
Field	Description
Location	Node location, in the format of rack/slot/module.
Client ID	LPTS client type.
Cookie	Client’s unique tag for the binding.
Clnt Flags	REUSEPORT -- client has set the SO_REUSEPORT or SO_REUSEADDR socket option.
Layer 3	Layer 3 protocol (IPv4, IPv6, CLNL).
Layer 4	Layer 4 protocol (TCP, UDP).
Local Addr	Local (destination) address.
Remote Addr	Remote (source) address.
Local Port	Local (destination) TCP or UDP port, or ICMP/IGMP packet type, or IPsec SPI.
Remote Port	Remote (source) TCP or UDP port.

The following sample output is from the show lpts bindings brief command:


RP/0/RSP0/CPU0:router# show lpts bindings brief

@ - Indirect binding; Sc - Scope

 Location   Clnt Sc L3   L4    VRF-ID   Local,Remote Address.Port  Interface
 ---------- ---- -- ---- ----- -------- -------------------------- ------------
 0/1/CPU0   IPV4 LO IPV4 ICMP  *        any.ECHO any               any         
 0/1/CPU0   IPV4 LO IPV4 ICMP  *        any.TSTAMP any             any         
 0/1/CPU0   IPV4 LO IPV4 ICMP  *        any.MASKREQ any            any         
 0/1/CPU0   IPV6 LO IPV6 ICMP6 *        any.ECHOREQ any            any         
 0/3/CPU0   IPV4 LO IPV4 ICMP  *        any.ECHO any               any         
 0/3/CPU0   IPV4 LO IPV4 ICMP  *        any.TSTAMP any             any

This table describes the significant fields shown in the display.

Table 3. show lpts bindings brief Command Field Descriptions
Field	Description
Location	Node location, in the format of rack/slot/module.
Clnt ID	LPTS client type.
Sc	Scope (LR = Logical-Router, LO = Local).
Layer 3	Layer 3 protocol.
Layer 4	Layer 4 protocol.
VRF-ID	VPN routing and forwarding (VRF) identification (vrfid) number.
Local,Remote Address.Port	Local (destination) and Remote (source) addresses and ports or packet types.
Interface	Inbound interface.

Related Commands


Command	Description
show lpts clients	Displays the client information for the Port Arbitrator.
show lpts flows	Displays information about LPTS flows.

show lpts clients

To display the client information for the Port Arbitrator, use the show lpts clients command in EXEC mode.

show lpts clients [times]

Syntax Description


times	(Optional) Displays information about binding request rates and service times.

Command Default

No default behavior or values

Command History


Release	Modification
Release 3.7.2	This command was introduced.

Usage Guidelines

The show lpts clients command displays the clients connected to the local packet transport services (LPTS) port arbitrator (PA).

Task ID


Task ID	Operations
lpts	read

Examples

The following sample output is from the show lpts clients command:


RP/0/RSP0/CPU0:router# show lpts clients

o_flgs - open flags ; clid - client id
clid            loc             flags   o_flgs
RAW(3)          0/RP1/CPU0      0x1     0x2
TCP(1)          0/RP1/CPU0      0x1     0x2
IPV4_IO(5)      0/1/CPU0        0x3     0x2
IPV4_IO(5)      0/2/CPU0        0x3     0x2
IPV4_IO(5)      0/RP1/CPU0      0x3     0x2
MPA(7)          0/RP1/CPU0      0x3     0x0

This table describes the significant fields shown in the display.

Table 4. show lpts clients Command Field Descriptions

Field

Description

Clid

LPTS client ID.

Loc

Node location, in the format rack/slot/module.

Flags

Client flags.

Note

The client flags are used only for debugging purposes.

o_flags

Open flags.

Note

The open flags are used only for debugging purposes.

The following sample output is from the show lpts clients times command. The output shows samples for the last 30 seconds, 1 minute, 5 minutes, 10 minutes, and a total (if nonzero). The number of transactions, number of updates, and the minimum/average/maximum time in milliseconds to process each transaction is shown.


RP/0/RSP0/CPU0:router# show lpts clients times

o_flgs - open flags ; clid - client id
clid            loc     flags   o_flgs
RAW(3)          0/RP1/CPU0      0x1     0x2
   30s:2 tx 2 upd 2/2/3ms/tx
    1m:2 tx 2 upd 2/2/3ms/tx
    5m:2 tx 2 upd 2/2/3ms/tx
   10m:2 tx 2 upd 2/2/3ms/tx
 total:2 tx 2 upd 2/-/3ms/tx
TCP(1)          0/RP1/CPU0      0x1     0x2
 total:3 tx 3 upd 1/-/1ms/tx
IPV4_IO(5)      0/1/CPU0        0x3     0x2
 total:1 tx 1 upd 0/-/0ms/tx
IPV4_IO(5)      0/2/CPU0        0x3     0x2
 total:1 tx 1 upd 1/-/1ms/tx
IPV4_IO(5)      0/RP1/CPU0      0x3     0x2
 total:1 tx 1 upd 3/-/3ms/tx
MPA(7)          0/RP1/CPU0      0x3     0x0

Related Commands


Command	Description
show lpts bindings	Displays the binding information in the port arbitrator.
show lpts flows	Displays information about LPTS flows.

show lpts flows

To display information about Local Packet Transport Services (LPTS) flows, use the show lpts flows command in EXEC mode.

show lpts flows [brief]

Syntax Description


brief	(Optional) Displays summary output.

Command Default

No default behavior or values

Command Modes

EXEC mode

Command History


Release	Modification
Release 3.7.2	This command was introduced.

Usage Guidelines

The show lpts flows command is used to display LPTS flows, which are aggregations of identical binding requests from multiple clients and are used to program the LPTS Internal Forwarding Information Base (IFIB) and Pre-IFIB.

Task ID


Task ID	Operations
lpts	read

Examples

The following sample output is from the show lpts flows command:


RP/0/RSP0/CPU0:router# show lpts flows

------------------------------------------
L3-proto    : IPV4(2)
L4-proto    : ICMP(1)
VRF-ID      : * (000000000)
Local-IP    : any
Remote-IP   : any
Pkt-Type    : 8
Remote-Port : any
Interface   : any (0x0)
Flow-type   : ICMP-local
Min-TTL     : 0
Slice       : RAWIP4_FM
Flags       : 0x20 (in Pre-IFIB)
Location    : (drop)
Element References
location / count / scope
* / 3 / LOCAL

This table describes the significant fields shown in the display.

Table 5. show lpts flows Command Field Descriptions
Field	Description
L3-proto	Layer 3 protocol (IPv4, IPv6, CLNL).
L4-proto	Layer 4 protocol (TCP, UDP, and so on).
VRF-ID	VPN routing and forwarding (VRF) identification (vrfid) number.
Local-IP	Local (destination) IP address.
Remote-IP	Remote (source) IP address.
Pkt-Type	ICMP or IGMP packet type.
Remote-Port	Remote (source) TCP or UDP port.
Interface	Ingress interface.
Flow-type	Flow classification for hardware packet policing.
Min-TTL	Minimum time-to-live value expected from in the incoming packet. Any packet received with a lower TTL value will be dropped.
Slice	IFIB slice.
Flags	Has FGID: Delivered to multiple destinations. No IFIB entry: IFIB entry suppressed. Retrying FGID allocation. In Pre-IFIB: Entry is in Pre-IFIB as well. Deliver to one: If multiple bindings, will deliver to only one.
Location	rack/slot/module to deliver to.
Element References	location: rack/slot/module of client. count: number of clients at that location. scope: binding scope (LR:Logical Router, LOCAL:Local).

The following sample output is from the show lpts flows brief command:


RP/0/RSP0/CPU0:router# show lpts flows brief

+ - Additional delivery destination; L - Local interest; P - In Pre-IFIB

 L3   L4    VRF-ID   Local, Remote Address.Port      Interface    Location    LP
 ---- ----- -------- ------------------------------- ------------ ----------- --
 IPV4 ICMP  *        any.ECHO any                    any          (drop)      LP
 IPV4 ICMP  *        any.TSTAMP any                  any          (drop)      LP
 IPV4 ICMP  *        any.MASKREQ any                 any          (drop)      LP
 IPV6 ICMP6 *        any.ECHOREQ any                 any          (drop)      LP
 IPV4 any   default  224.0.0.2 any                   Gi0/1/0/1    0/5/CPU0     P

This table describes the significant fields shown in the display.

Table 6. show lpts flows brief Command Field Descriptions
Field	Description
L3	Layer 3 protocol (IPv4, IPv6, CLNL).
L4	Layer 4 protocol.
VRF-ID	VPN routing and forwarding (VRF) identification (vrfid) number.
Local, Remote Address.Port	Local (destination) and remote (source) IP addresses and TCP or UDP ports, or ICMP/IGMP packet types, or IPSec Security Parameters Indices.
Interface	Ingress interface.
Location	Delivery location: rack/slot/module—Individual location. [0xNNNNN]—Multiple locations (platform-dependent value). (drop)—Do not deliver to any application.
LP	Local interest (to be processed by IPv4 or IPv6 stack directly) or entry is resident in Pre-IFIB.

Related Commands


Command	Description
show lpts bindings	Displays the binding information in the Port Arbitrator .
show lpts clients	Displays the client information for the Port Arbitrator .

show lpts ifib

To display the entries in the Internal Forwarding Information Base (IFIB), use the show lpts ifib command in EXEC mode.

show lpts ifib [entry] [type {bgp4 | bgp6 | isis | mcast4 | mcast6 | ospf-mc4 | ospf-mc6 | ospf4 | ospf6 | raw4 | raw6 | tcp4 | tcp6 | udp4 | udp6} | all] [brief [statistics]] [slices] [times] [location node-id]

Syntax Description


entry	(Optional) Displays the IFIB entries.
type	(Optional) Displays the following protocol types. bgp4 —IPv4 Border Gateway Protocol (BGP) slice bgp6 —IPv6 BGP slice isis —Intermediate System-to-Intermediate System (IS-IS) slice mcast4 —IPv4 multicast slice mcast6 —IPv6 multicast slice ospf-mc4 —IPv4 Open Shortest Path First (OSPF) multicast slice ospf-mc6 —IPv6 OSPF multicast slice ospf4 —IPv4 OSPF slice ospf6 —IPv6 OSPF slice raw4 —IPv4 raw IP raw6 —IPv6 raw IP tcp4 —IPv4 Transmission Control Protocol (TCP) slice tcp6 —IPv6 TCP slice udp4 —IPv4 UDP slice udp6 —IPv6 UDP slice
all	Displays all IFIB types.
brief	(Optional) Displays the IFIB entries in brief format.
statistics	(Optional) Displays the IFIB table with statistics information.
slices	(Optional) Displays IFIB slices.
times	(Optional) Displays the IFIB update transaction times.
location `node-id`	(Optional) Specifies the location of the Flow Manager. The `node-id` argument is entered in the rack/slot/module notation.

Command Default

No default behavior or values

Command Modes

EXEC mode

Command History


Release	Modification
Release 3.7.2	This command was introduced.

Usage Guidelines

Use this command to display detailed information about the entries in an IFIB slice. This command is useful for debugging problems with delivering packets to applications.

When the statistics keyword is used, detailed statistics are displayed for packet count, number of entries in each slice, and a total entries count.

Task ID


Task ID	Operations
lpts	read

Examples

The following sample output is from the show lpts ifib command:


RP/0/RSP0/CPU0:router# show lpts ifib

O - Opcode; A - Accept Counter; D - Drop Counter; F - Flow Type; L - Listener Tag; 
I - Local Flag; Y - SYN; T - Min TTL; DV - Deliver; DP - Drop; RE - Reassemble; na - Not Applicable
----------------------------------------------------
VRF-ID           : default (0x60000000)
Port/Type        : any
Source Port      : any
Dest IP          : any
Source IP        : any
Layer 4          : 88 (88)
Interface        : any (0x0)
O/A/D/F/L/I/Y/T  : DELIVER/0/0/EIGRP/IPv4_STACK/0/0/0
Deliver List     : 0/5/CPU0
----------------------------------------------------

This table describes the significant fields shown in the display.

Table 7. show lpts ifib entries Command Field Descriptions

Field

Description

VRF-ID

VPN routing and forwarding (VRF) identification (vrfid) number.

Port/Type

Destination (local) TCP or UDP port number, or ICMP/IGMP packet type, or IPSec Security Parameters Index.t2222.

Source Port

Source (remote) TCP or UDP port.

Dest IP

Destination (local) IP address.

Source IP

Source (remote) IP address.

Layer 4

Layer 4 protocol number (6 = TCP).

Note

Only the common Layer 4 protocol names are displayed.

Interface

Ingress interface name.

O/S/P/R/L/I/Y

O: Opcode (DELIVER, DROP, or REASSEMBLE
S: Stats counter
P: Packet forwarding priority (LO, MED, or HIGH)
R: Rate limit (LO, MED, or HIGH)
L: Listener tag (IPv4_STACK, IPv6_STACK, or CLNL_STACK)
I: Local-interest flag (0 or 1)
Y: TCP SYN flag (0 or 1)

Deliver List

(drop)—Drop packet
rack/slot/module—Deliver to single destination
[0xNNNN]—Deliver to multiple destinations (platform-dependent format)

The following sample output is from the show lpts ifib brief command:


RP/0/RSP0/CPU0:router# show lpts ifib brief

 Slice    Local, Remote Address.Port            L4    Interface    Dlvr
 -------- ------------------------------------- ----- ------------ -----------
 TCP4     any.7 any                             TCP   any          0/RP1/CPU0
 TCP4     any.9 any                             TCP   any          0/RP1/CPU0

The following sample output is from the show lpts ifib brief statistics command:


RP/0/RSP0/CPU0:router# show lpts ifib brief statistics

 Slice    Local, Remote Address.Port            L4    Interface    Accept/Drop
 -------- ------------------------------------- ----- ------------ -----------
 TCP4     any.7 any                             TCP   any          0/0
 TCP4     any.9 any                             TCP   any          0/0
 TCP4     any.19 any                            TCP   any          0/0

 Slice    Num. Entries Accepts/Drops
 -------- ------------ -------------
TCP4     3            0/0
Total    3            0/0

Related Commands


Command	Description
show lpts ifib slices	Displays IFIB slice information.

show lpts ifib slices

To display Internal Forwarding Information Base (IFIB) slice information, use the show lpts ifib slices command in EXEC mode.

show lpts ifib slices [type {bgp4 | bgp6 | isis | mcast4 | mcast6 | ospf-mc4 | ospf-mc6 | ospf4 | ospf6 | raw4 | raw6 | tcp4 | tcp6 | udp4 | udp6}] [all] [statistics] [times]

Syntax Description


type	(Optional) Enter protocol types. bgp4 —IPv4 Border Gateway Protocol (BGP) slice bgp6 —IPv6 BGP slice isis —Intermediate System-to-Intermediate System (IS-IS) slice mcast4 —IPv4 multicast slice mcast6 —IPv6 multicast slice ospf-mc4 —IPv4 Open Shortest Path First (OSPF) multicast slice ospf-mc6 —IPv6 OSPF multicast slice ospf4 —IPv4 OSPF slice ospf6 —IPv6 OSPF slice raw4 —IPv4 raw IP raw6 —IPv6 raw IP tcp4 —IPv4 Transmission Control Protocol (TCP) slice tcp6 —IPv6 TCP slice udp4 —IPv4 UDP slice udp6 —IPv6 UDP slice
all	(Optional) Displays all entries.
statistics	(Optional) Displays the statistics for slice lookups.
times	(Optional) Displays the IFIB update transaction times.

Command Default

No default behavior or values

Command Modes

EXEC mode

Command History


Release	Modification
Release 3.7.2	This command was introduced.

Usage Guidelines

Use the show lpts ifib slices command when troubleshooting IFIB entries and slice assignments. This command is especially useful when troubleshooting problems with delivering packets to applications.

Task ID


Task ID	Operations
lpts	read

Examples

The following sample output is from the show lpts ifib slices command:


RP/0/RSP0/CPU0:router# show lpts ifib slices 

Slice    L3   L4     Port  Location
-------- ---- ------ ----- --------
RAWIP4   IPV4 any    any   0/RP1/CPU0
RAWIP6   IPV6 any    any   0/RP1/CPU0
OSPF4    IPV4 OSPF   any   0/RP1/CPU0
OSPF6    IPV6 OSPF   any   0/RP1/CPU0
OSPF_MC4 IPV4 any    any   0/RP1/CPU0
OSPF_MC6 IPV6 any    any   0/RP1/CPU0
BGP4     IPV4 TCP    179   0/RP1/CPU0
BGP6     IPV6 TCP    179   0/RP1/CPU0

UDP4     IPV4 UDP    any   0/RP1/CPU0
UDP6     IPV6 UDP    any   0/RP1/CPU0
TCP4     IPV4 TCP    any   0/RP1/CPU0
TCP6     IPV6 TCP    any   0/RP1/CPU0
ISIS     CLNS -      any   0/RP1/CPU0
MCAST4   IPV4 any    any   0/RP1/CPU0
MCAST6   IPV6 any    any   0/RP1/CPU0

The following sample output is from the show lpts ifib slices times command:


RP/0/RSP0/CPU0:router# show lpts ifib slices times

Slice    L3   L4     Port  Location
-------- ---- ------ ----- --------
RAWIP4   IPV4 any    any   0/RP1/CPU0
RAWIP6   IPV6 any    any   0/RP1/CPU0
OSPF4    IPV4 OSPF   any   0/RP1/CPU0
OSPF6    IPV6 OSPF   any   0/RP1/CPU0
OSPF_MC4 IPV4 any    any   0/RP1/CPU0
OSPF_MC6 IPV6 any    any   0/RP1/CPU0
BGP4     IPV4 TCP    179   0/RP1/CPU0
BGP6     IPV6 TCP    179   0/RP1/CPU0

UDP4     IPV4 UDP    any   0/RP1/CPU0
UDP6     IPV6 UDP    any   0/RP1/CPU0
TCP4     IPV4 TCP    any   0/RP1/CPU0
TCP6     IPV6 TCP    any   0/RP1/CPU0
ISIS     CLNS -      any   0/RP1/CPU0
MCAST4   IPV4 any    any   0/RP1/CPU0
MCAST6   IPV6 any    any   0/RP1/CPU0
  Flow Manager 0/RP1/CPU0:
   total:5 tx 13 upd 1/-/1ms/tx

The following sample output is from the show lpts ifib slices statistics command:


RP/0/RSP0/CPU0:router# show lpts ifib slices all statistics

Slice    L3   L4     Port  Location   Lookups RmtDlvr Rejects RLDrops NoEntry
-------- ---- ------ ----- ---------- ------- ------- ------- ------- -------
RAWIP4   IPV4 any    any   0/0/CPU0   5       0       0       0       0
RAWIP6   IPV6 any    any   0/0/CPU0   0       0       0       0       0
OSPF4    IPV4 OSPF   any   0/0/CPU0   0       0       0       0       0
OSPF6    IPV6 OSPF   any   0/0/CPU0   0       0       0       0       0
OSPF_MC4 IPV4 any    any   0/0/CPU0   0       0       0       0       0
OSPF_MC6 IPV6 any    any   0/0/CPU0   0       0       0       0       0
BGP4     IPV4 TCP    179   0/0/CPU0   0       0       0       0       0
BGP6     IPV6 TCP    179   0/0/CPU0   0       0       0       0       0

UDP4     IPV4 UDP    any   0/0/CPU0   3704    0       979     0       0
UDP6     IPV6 UDP    any   0/0/CPU0   0       0       0       0       0
TCP4     IPV4 TCP    any   0/0/CPU0   0       0       0       0       0
TCP6     IPV6 TCP    any   0/0/CPU0   0       0       0       0       0
ISIS     CLNS -      any   0/0/CPU0   0       0       0       0       0
MCAST4   IPV4 any    any   0/0/CPU0   0       0       0       0       0
MCAST6   IPV6 any    any   0/0/CPU0   0       0       0       0       0
  Flow Manager 0/0/CPU0:
   Packets in: 3792
   Packets delivered locally without lookups: 83
   Slice lookups: 3709
     Rejects: 979

This table describes the significant fields shown in the display.

Table 8. show lpts ifib slices statistics Command Field Descriptions
Field	Description
Slice	Slice number.
L3-proto	Layer 3 protocol (IPv4, IPv6, CLNL).
L4-proto	Layer 4 protocol (TCP, UDP, and others).
Port	Local (destination) TCP or UDP port.
Location	Node location, in the format rack/slot/module.

Related Commands


Command	Description
show lpts ifib	Displays entries in the IFIB.

show lpts ifib statistics

To display Internal Forwarding Information Base (IFIB) statistics, use the show lpts ifib statistics command in EXEC mode.

show lpts ifib statistics [location node-id]

Syntax Description


location `node-id`	(Optional) Displays IFIB statistics for the designated node. The `node-id` argument is entered in the rack/slot/module notation.

Command Default

No default behavior or values

Command Modes

EXEC mode

Command History


Release	Modification
Release 3.7.2	This command was introduced.

Usage Guidelines

No specific guidelines impact the use of this command.

Task ID


Task ID	Operations
lpts	read

Examples

The following sample output is from the show lpts ifib statistics command:


RP/0/RSP0/CPU0:router# show lpts ifib statistics

Flow Manager 0/RP1/CPU0:
   Packets in:254
   Packets delivered locally without lookups:0
   Slice lookups:254
     Post-lookup error drops:
      Failed ipv4_netio_input:1
     Rejects:254
    Packets delivered locally:0
    Packets delivered remotely:0

This table describes the significant fields shown in the display.

Table 9. show lpts ifib statistics Command Field Descriptions
Field	Description
Packets in	Packets presented to the LPTS decaps node in netio.
Packets delivered locally without lookups	Packets previously resolved on a LC delivered directly to L3.
Slice lookups	Packets requiring slice lookups.
Post-lookup error drops	Packets dropped after a slice lookup.
Rejects	Packets that caused a TCP RST or ICMP Port/Protocol Unreachable.
Packets delivered locally	Packets delivered to local applications after slice lookups.
Packets delivered remotely	Packets delivered to applications on remote RPs.

Note

The sample output is an example only and displays only those fields showing a value. No display exists for nonzero values. This command may show other values depending on your router configuration.

Related Commands


Command	Description
show lpts ifib	Displays the entries in an IFIB slice.

show lpts ifib times

To display Internal Forwarding Information Base (IFIB) update transaction times, use the show lpts ifib times command in EXEC mode.

show lpts ifib times [location node-id]

Syntax Description


location `node-id`	(Optional) Displays IFIB update transaction times for the designated node. The `node-id` argument is entered in the rack/slot/module notation.

Command Modes

EXEC mode

Command History


Release	Modification
Release 3.7.2	This command was introduced.

Usage Guidelines

No specific guidelines impact the use of this command.

Task ID


Task ID	Operations
lpts	read

Examples

The following sample output is from the show lpts ifib times command:


RP/0/RSP0/CPU0:router# show lpts ifib times

Slice    L3   L4     Port  Location
-------- ---- ------ ----- --------
RAWIP4   IPV4 any    any   0/RP1/CPU0
RAWIP6   IPV6 any    any   0/RP1/CPU0
OSPF4    IPV4 OSPF   any   0/RP1/CPU0
OSPF6    IPV6 OSPF   any   0/RP1/CPU0
OSPF_MC4 IPV4 any    any   0/RP1/CPU0
OSPF_MC6 IPV6 any    any   0/RP1/CPU0
BGP4     IPV4 TCP    179   0/RP1/CPU0
BGP6     IPV6 TCP    179   0/RP1/CPU0
UDP4     IPV4 UDP    any   0/RP1/CPU0
UDP6     IPV6 UDP    any   0/RP1/CPU0
TCP4     IPV4 TCP    any   0/RP1/CPU0
TCP6     IPV6 TCP    any   0/RP1/CPU0
ISIS     CLNS -      any   0/RP1/CPU0
MCAST4   IPV4 any    any   0/RP1/CPU0
MCAST6   IPV6 any    any   0/RP1/CPU0
Flow Manager 0/RP1/CPU0:
 total:5 tx 13 upd 1/-/1ms/tx

This table describes the significant fields shown in the display.

Table 10. show lpts ifib times Command Field Descriptions
Field	Description
Slice	Slice number.
L3 Protocol	Layer 3 protocol (IPv4, IPV6, CLNL).
L4 Protocol	Layer 4 protocol (TCP, UDP, and so on).
Port	Local (destination) TCP or UDP port.
Location	Node location, in the format rack/slot/module.

Related Commands


Command	Description
show lpts ifib	Displays detailed information about entries in an IFIB slice.

show lpts mpa groups

To display aggregate information about multicast bindings for groups, use the show lpts mpa groups command in EXEC mode.

show lpts mpa groups type interface-path-id

Syntax Description

type

Interface type. For more information, use the question mark (?) online help function.

interface-path-id

Either a physical interface instance or a virtual interface instance as follows:

Physical interface instance. Naming notation is rack/slot/module/port and a slash between values is required as part of the notation.

rack: Chassis number of the rack.
slot: Physical slot number of the modular services card or line card.
module: Module number. A physical layer interface module (PLIM) is always 0.
port: Physical port number of the interface.

Note

In references to a Management Ethernet interface located on a route processor card, the physical slot number is alphanumeric (RSP0 ) and the module is CPU0. Example: interface MgmtEth0/RSP0 /CPU0/0.

Virtual interface instance. Number range varies depending on interface type.

For more information about the syntax for the router, use the question mark (?) online help function.

Command Default

No default behavior or values

Command Modes

EXEC mode

Command History


Release	Modification
Release 3.7.2	This command was introduced.

Usage Guidelines

The show lpts mpa groups command is used to aggregate information about the multicast groups joined on a specified interface. This command also displays the filter mode and source list associated with the groups joined on a specified interface.

Task ID


Task ID	Operations
lpts	read
network	read

Examples

The following sample output is from the show lpts mpa groups command:


RP/0/RSP0/CPU0:router# show lpts mpa groups gigabitethernet 0/0/0/0 

  224.0.0.2 : includes 0, excludes 1, mode EXCLUDE
    <no source filter>
  224.0.0.13 : includes 0, excludes 1, mode EXCLUDE
    <no source filter>
  224.0.0.22 : includes 0, excludes 1, mode EXCLUDE
    <no source filter>

This table describes the significant fields shown in the display.

Table 11. show lpts mpa groups Command Field Descriptions
Field	Description
Includes	Displays the number of sockets that have set up an INCLUDE mode filter for that group and if there are any source-specific filters.
Excludes	Displays the number of sockets that have set up an EXCLUDE mode filter for that group and if there are any source-specific filters.

show lpts pifib

To display Pre-Internal Forwarding Information Base (Pre-IFIB) entries, use the show lpts pifib command in EXEC mode.

show lpts pifib [entry] [hardware {entry | police}[type {isis | ipv4 | ipv6} {frag | ixmp | mcast | tcp | udp | ipsec | raw | all} [entry] brief [statistics][location node-id]

Syntax Description


entry	(Optional) Pre-IFIB entry.
hardware	(Optional) Displays hardware for Pre-IFIB.
entry	(Optional) Displays the entries for Pre-IFIB.
police	(Optional) Displays the policer values that are being use.
type	(Optional) Protocol type.
isis	(Optional) Intermediate System-to-Intermediate System (IS-IS) sub Pre-IFIB type.
ipv4	(Optional) IPv4 sub Pre-IFIB type. Possible values include frag , ixmp , mcast , tcp , udp , ipsec , and raw .
ipv6	(Optional) IPv6 sub Pre-IFIB type. Possible values include frag , icmp , ixmp , mcast , tcp , udp , ipsec, and raw .
frag	(Optional) IPv4 or IPv6 fragment.
icmp	(Optional) IPv4 or IPv6 IXMP and Internet Group Management Protocol (IGMP).
ixmp	(Optional) IPv4 or IPv6 IXMP (ICMP and Internet Group Management Protocol [IGMP]).
mcast	(Optional) IPv4 or IPv6 Multicast.
tcp	(Optional) IPv4 or IPv6 Transmission Control Protocol (TCP).
udp	(Optional) IPv4 or IPv6 User Datagram Protocol (UDP).
ipsec	(Optional) Secure IP.
raw	(Optional) IPv4 orIPv6 raw IP.
all	(Optional) All sub Pre-IFIBs.
brief	(Optional) Pre-IFIB entries in brief format.
statistics	(Optional) Pre-IFIB table with statistics information.
location `node-id`	(Optional) The `node-id` argument is entered in the rack/slot/module notation (for example, 0/7/CPU0).

Command Default

By default, all entries are displayed.

Command Modes

EXEC mode

Command History


Release	Modification
Release 3.7.2	This command was introduced.

Usage Guidelines

Use the show lpts pifib command with the brief keyword to perform the following functions:

Display entries of all or part of a Pre-IFIB.

Display a short description of each entry in the LPTS Pre-IFIB, optionally displaying packet counts for each entry.

Note

These statistics are used only for packets that are processed by a line card, route processor, or distributed route processor.

Pre-IFIB statistics for packets processed by line card hardware are counted separately.

By default, all the defaults are displayed.

Task ID


Task ID	Operations
lpts	read

Examples

The following is sample output for the show lpts pifib command:


RP/0/RSP0/CPU0:router# show lpts pifib 

O - Opcode; F - Flow Type; L - Listener Tag; I - Local Flag; T - Min TTL;
na - Not Applicable
----------------------------------------------------
L3 Protocol       : CLNS
L4 Protocol       : -
VRF-ID            : default (0x60000000)
Destination IP    : any
Source IP         : any
Port/Type         : any
Source Port       : any
Is Fragment       : 0
Is SYN            : 0
Interface         : any (0x0)
O/F/L/I/T         : DELIVER/ISIS-default/CLNS_STACK/0/0
Deliver List      : FGID 11935
Accepts/Drops     : 0/0
Is Stale          : 0

The following is sample output for the show lpts pifib type command using the ipv4 and tcp keywords.


RP/0/RSP0/CPU0:router# show lpts pifib type ipv4 tcp

O - Opcode; F - Flow Type; L - Listener Tag; I - Local Flag; T - Min TTL;
na - Not Applicable
----------------------------------------------------
L3 Protocol       : IPV4
L4 Protocol       : TCP
VRF-ID            : default (0x60000000)
Destination IP    : any
Source IP         : any
Port/Type         : Port:23
Source Port       : any
Is Fragment       : 0
Is SYN            : 0
Interface         : any (0x0)
O/F/L/I/T         : DELIVER/TELNET-default/IPv4_LISTENER/0/0
Deliver List      : 0/RSP0

/CPU0
Accepts/Drops     : 0/0
Is Stale          : 0
----------------------------------------------------

The following is sample output from the show lpts pifib command with the entry and brief keywords added :


RP/0/RSP0/CPU0:router# show lpts pifib entry brief

* - Critical Flow; I - Local Interest;
X - Drop; R - Reassemble;

 Type       VRF-ID   Local, Remote Address.Port L4    Interface    Deliver
 ---------- -------- -------------------------- ----- ------------ -------------

 ISIS       *        - -                        -     any          0/0/CPU0
 IPv4_frag  *        any any                    any   any          R
 IPv4_IXMP  *        any.ECHO any               ICMP  any          XI
 IPv4_IXMP  *        any.TSTAMP any             ICMP  any          XI
 IPv4_IXMP  *        any.MASKREQ any            ICMP  any          XI
 IPv4_IXMP  *        any any                    ICMP  any          0/0/CPU0
 IPv4_IXMP  *        any any                    IGMP  any          0/0/CPU0
 IPv4_mcast *        224.0.0.5 any              any   any          0/0/CPU0
 IPv4_mcast *        224.0.0.6 any              any   any          0/0/CPU0
 IPv4_mcast *        224.0.0.0/4 any            any   any          0/0/CPU0

 IPv4_TCP   *        any.179 any                TCP   any          0/0/CPU0
 IPv4_TCP   *        any any.179                TCP   any          0/0/CPU0
 IPv4_TCP   *        any any                    TCP   any          0/0/CPU0
 IPv4_UDP   *        any any                    UDP   any          0/0/CPU0
 IPv4_IPsec *        any any                    ESP   any          0/0/CPU0
 IPv4_IPsec *        any any                    AH    any          0/0/CPU0
 IPv4_rawIP *        any any                    OSPF  any          0/0/CPU0
 IPv4_rawIP *        any any                    any   any          0/0/CPU0
 IPv6_frag  *        any any                    any   any          R
 IPv6_ICMP  *        any.na any                 ICMP6 any          XI
 IPv6_ICMP  *        any any                    ICMP6 any          0/0/CPU0
 IPv6_mcast *        ff02::5 any                any   any          0/0/CPU0
 IPv6_mcast *        ff02::6 any                any   any          0/0/CPU0
 IPv6_mcast *        ff00::/8 any               any   any          0/0/CPU0
 IPv6_TCP   *        any.179 any                TCP   any          0/0/CPU0
 IPv6_TCP   *        any any.179                TCP   any          0/0/CPU0
 IPv6_TCP   *        any any                    TCP   any          0/0/CPU0
 IPv6_UDP   *        any any                    UDP   any          0/0/CPU0
 IPv6_IPsec *        any any                    ESP   any          0/0/CPU0
 IPv6_IPsec *        any any                    AH    any          0/0/CPU0
 IPv6_rawIP *        any any                    OSPF  any          0/0/CPU0
 IPv6_rawIP *        any any                    any   any          0/0/CPU0

The following sample output is from the show lpts pifib command with the entry, brief, and entry brief statistics keywords added :


RP/0/RSP0/CPU0:router# show lpts pifib entry brief statistics

* - Critical Flow; I - Local Interest;
X - Drop; R - Reassemble;

 Type       VRF-ID   Local, Remote Address.Port L4    Interface    Accepts/Drops

 ---------- -------- -------------------------- ----- ------------ -------------

 ISIS       *        - -                        -     any          0/0
 IPv4_frag  *        any any                    any   any          0/0
 IPv4_IXMP  *        any.ECHO any               ICMP  any          0/0
 IPv4_IXMP  *        any.TSTAMP any             ICMP  any          0/0
 IPv4_IXMP  *        any.MASKREQ any            ICMP  any          0/0
 IPv4_IXMP  *        any any                    ICMP  any          5/0
 IPv4_IXMP  *        any any                    IGMP  any          0/0
 IPv4_mcast *        224.0.0.5 any              any   any          0/0
 IPv4_mcast *        224.0.0.6 any              any   any          0/0
 IPv4_mcast *        224.0.0.0/4 any            any   any          0/0
 IPv4_TCP   *        any.179 any                TCP   any          0/0
 IPv4_TCP   *        any any.179                TCP   any          0/0
 IPv4_TCP   *        any any                    TCP   any          0/0
 IPv4_UDP   *        any any                    UDP   any          4152/0
 IPv4_IPsec *        any any                    ESP   any          0/0
 IPv4_IPsec *        any any                    AH    any          0/0
 IPv4_rawIP *        any any                    OSPF  any          0/0

------------------------


statistics:

Type            Num. Entries         Accepts/Drops

------          ------------         -------------
ISIS            1                    0/0
IPv4_frag       1                    0/0
IPv4_IXMP       5                    5/0
IPv4_mcast      3                    0/0
IPv4_TCP        3                    0/0
IPv4_UDP        1                    4175/0
IPv4_IPsec      2                    0/0
IPv4_rawIP      2                    0/0
IPv6_frag       1                    0/0
IPv6_ICMP       2                    0/0
IPv6_mcast      3                    0/0
IPv6_TCP        3                    0/0
IPv6_UDP        1                    0/0
IPv6_IPsec      2                    0/0
IPv6_rawIP      2                    0/0
Total           32

Packets into Pre-IFIB: 4263
Lookups: 4263
Packets delivered locally: 4263
Packets delivered remotely: 0

This table describes the significant fields shown in the display for the show lpts pifib command with the brief and statistics keywords .

Table 12. show lpts pifib Command Field Descriptions
Field	Description
Type	Hardware entry type.
VRF ID	VPN routing and forwarding (VRF) identification (vrfid) number.
Local, Remote Address. Port	Indicates local address (in the form of local port and type) and remote address (remote port).
L4	Layer 4 protocol of the entry.
Interface	Interface for this entry.
Accepts/Drops	Number of packets sent to DestAddr/Number of packets dropped due to policing.
Num. Entries	Number of pre-ifib entries of the listed type.
Packets into Pre-IFIB	Packets presented for pre-IFIB lookups.
Lookups	Packets looked up.
Packets delivered locally	Packets delivered to local applications or the local stack (n duplicated) packets duplicated for delivery to applications and the local stack.
Packets delivered remotely	Packets delivered to applications or for lookup on other RPs.

show lpts pifib hardware context

To display the context for the Local Packet Transport Services (LPTS) pre-IFIB hardware-related data structures, use the show lpts pifib hardware context command in EXEC mode.

show lpts pifib hardware context [location {all | }]

Syntax Description


location `node-id`	(Optional) Displays pre-Internal Forwarding Information Base (IFIB) information for the designated node. The `node-id` argument is entered in the rack/slot/module notation.
all	Specifies all locations.

Command Modes

EXEC mode

Command History


Release	Modification
Release 3.7.2	This command was introduced.

Usage Guidelines

No specific guidelines impact the use of this command.

Task ID


Task ID	Operations
lpts	read

Examples

The following sample output is from the show lpts pifib hardware context command with the location keyword:


RP/0/RSP0/CPU0:router# show lpts pifib hardware context location 0/1/0

Node: 0/1/CPU0:
----------------------------------------
ACL ID for block 0: 3
Batching mode: No batching
TCAM Mgr ready: Yes
Mstats Mgr ready: Yes
Metro Driver ready: Yes
Resource sync: Yes
Sweep invoked: Yes
Initialization phase: Done
Queue for TCAM Batching:
    Size: 0 Head ptr: 0x0
Queue for Entry Processing:
    Size: 0 Head ptr: 0x0
Queue for Resources Releasing:
    Size: 0 Head ptr: 0x0
--------
IPv4 Region:
Block [0]: 
    # of TCAM entries: 56 block created: Yes
    first entry in the block: 0x482a055c
Last non mandatory entry: 0x482c1a08
Queue for Mandatory entries not in TCAM:
    Size: 0 Head ptr: 0x0
Queue for Non Mandatory entries not in TCAM:
    Size: 0 Head ptr: 0x0
1st entry to be programmed: 0x0
Max. of entries: 15999
# of entries in shadow list: 54
1st entry in shadow list: 0x482a055c
last entry in shadow list: 0x48303534
--------
IPv6 Region:
Block [0]: 
    # of TCAM entries: 20 block created: Yes
    first entry in the block: 0x482c1720
Last non mandatory entry: 0x482c1b00
Queue for Mandatory entries not in TCAM:
    Size: 0 Head ptr: 0x0
Queue for Non Mandatory entries not in TCAM:
    Size: 0 Head ptr: 0x0
1st entry to be programmed: 0x0
Max. of entries: 15999
# of entries in shadow list: 20
1st entry in shadow list: 0x482c1720
last entry in shadow list: 0x482e2344
--------
ISIS Region:
Block [0]: 
    # of TCAM entries: 1 block created: Yes
    first entry in the block: 0x482e2cf4
Last non mandatory entry: 0xfd30d088
Queue for Mandatory entries not in TCAM:
    Size: 0 Head ptr: 0x0
Queue for Non Mandatory entries not in TCAM:
    Size: 0 Head ptr: 0x0
1st entry to be programmed: 0x0
Max. of entries: 15999
# of entries in shadow list: 1
1st entry in shadow list: 0x482e2cf4
last entry in shadow list: 0x482e2cf4
# of TCAM Insert: 0
# of TCAM Delete: 0
# of TCAM Update: 0
# of resource leaks: 0

show lpts pifib hardware entry

To display entries in the Local Packet Transport Services (LPTS) pre-IFIB hardware table, use the show lpts pifib hardware entry command in EXEC mode.

To display entries in the Local Packet Transport Services (LPTS) pre-IFIB hardware table with respect to the ACLs that are configured based on LPTS on all locations or a particular node, use the show lpts pifib hardware entry aclname acl-name statistics location all| node-id command in EXEC mode

show lpts pifib hardware entry [acl acl-name] np np-number [type {ipv4 | ipv6 | isis}] [start-index number num-entries number] [brief | statistics] [location {all | node_id}]

Syntax Description


acl `acl-name`	(Optional) Specifies the ACL names that are configured based on LPTS on a particular node or all locations.
type	(Optional) Specifies the hardware entry type. Enter one of the following types: ipv4 —Specifies IPv4 entries. ipv6 —Specifies IPv6 entries. isis —Specifies ISIS entries.
start-index `number`	(Optional) Starting index number.
num-entries `number`	(Optional) Maximum entries permitted.
brief	(Optional) Displays summary hardware entry information.
statistics	(Optional) Displays hardware entry accept or drop statistics for each summary entry.
location all	(Optional) Specifies all locations.
location `node-id`	(Optional) Displays pre-Internal Forwarding Information Base (IFIB) information for the designated node. The `node-id` argument is entered in the rack/slot/module notation.
np `np-number`	Displays statistics of network processor (NP) based policer in LPTS.

Command Default

Displays hardware entry information in brief.

Command Modes

EXEC mode

Command History


Release	Modification
Release 3.7.2	This command was introduced.
Release 5.2.2	The show command output was updated to display LPTS mapped to an ACL.
Release 5.3.2	The np `np-number` keyword was added.
Release 6.5.2	The acl `acl-name` keyword was added.

Usage Guidelines

SNMP is not supported on ASR 9000 4th Generation Line Cards, Therefore, the ACLs that are configured on ASR 9000 4th Generation Line Cards are not displayed by running this command.

Task ID


Task ID	Operations
lpts	read

Examples

The following sample output is from the show lpts pifib hardware entry command with the location keyword:


RP/0/RSP0/CPU0:router# show lpts pifib hardware entry location 0/1/CPU0

Node: 0/0/CPU0:
----------------------------------------
M - Fabric Multicast;
L - Listener Tag; T - Min TTL;
F - Flow Type;
DestNode - Destination Node;
DestAddr - Destination Fabric queue;
SID - Stream ID;
Po - Policer; Ct - Stats Counter;
Lp - Lookup priority; Sp - Storage Priority;
Ar - Average rate limit; Bu - Burst;
HAr - Hardware Average rate limit; HBu - Hardware Burst;
Cir - Committed Information rate in HAL
Rsp - Relative sorting position;
Rtp - Relative TCAM position;
na - Not Applicable or Not Available
----------------------------------------------------
VRF ID            : any
Destination IP    : any
Source IP         : any
Is Fragment       : 0
Interface         : any
M/L/T/F           : 0/ISIS_FM/0/ISIS-default
DestNode          : 48
DestAddr          : 48
SID               : 9
L4 Protocol       : -
Source port       : any
Destination Port  : any
Ct                : 0xd84da
Accepted/Dropped  : 0/0
Lp/Sp             : 0/0
# of TCAM entries : 1
HPo/HAr/HBu/Cir   : 1879638/2000pps/2000ms/2000pps
State             : Entry in TCAM
Rsp/Rtp           : 0/2

             Node: 0/1/CPU0:
----------------------------------------
V - Vital; M - Fabric Multicast;
C - Moose Congestion Flag; L - Listener Tag; T - Min TTL;
F - Flow Type;
DestNode - Destination Node;
DestAddr - Destination Fabric Address;
Sq - Ingress Shaping Queue; Dq - Destination Queue;
Po - Policer; Ct - Stats Counter;
Lp - Lookup priority; Sp - Storage Priority;
Ar - Average rate limit; Bu - Burst;
Rsp - Relative sorting position;
----------------------------------------------------
L4 Protocol       : any
VRF ID            : any
Source IP         : any
Port/Type         : any
Source Port       : any
Is Fragment       : 1
Is SYN            : any
Interface         : any
V/M/C/L/T/F       : 0/0/0/IPv4_REASS/0/Fragment
DestNode          : Local
DestAddr          : Punt
Sq/Dq/Ct          : 4/na/0x24400
Accepted/Dropped  : 0/0
Lp/Sp             : 0/0
# of TCAM entries : 1
Po/Ar/Bu          : 101/1000pps/100ms
State             : Entry in TCAM
Rsp/Rtp           : 0/0
----------------------------------------------------

This sample shows LPTS mapped to the ACL at location 0/0/CPU0:

Note

This is applicable for Release 5.2.2 onwards.


RP/0/RSP0/CPU0:router# show lpts pifib hardware entry statistics location 0/0/CPU0

             Node: 0/0/CPU0:
----------------------------------------
L3 - L3 Protocol;L4 - Layer4 Protocol; Intf - Interface;
Dest - Destination Node;
LU - Local chassis fabric unicast;
LM - Local chassis fabric multicast;
RU - Multi chassis fabric unicast;
RM - Multi chassis fabric multicast;
na - Not Applicable or Not Available

Offset L3   VRD id       L4     Intf            Dest       Pkts/Drops      laddr,Port raddr,Port          acl name
---- --- -------- ---- --------- ------ --------- -----------          --------------------------------
8      IPV4 *            any    any             Local      0/0             any,any any,any                          
9      CLNS *            -      any             LU(30)     0/0             - -                                      
10     IPV4 *            ICMP   any             Local      0/0             any,any any,ECHO                         
11     IPV4 *            OSPF   Optimized       LU(30)     35417/0         224.0.0.5,any any,any  acl_name1                    
12     IPV4 *            OSPF   Optimized       LU(30)     0/0             224.0.0.6,any any,any                    
13     IPV4 *            OSPF   Optimized       LU(30)     12/0            any,any any,any                          
14     IPV4 default      TCP    any             LU(30)     0/0             any,179 40.40.40.2,any                   
15     IPV4 default      TCP    any             LU(30)     0/0             any,179 50.50.50.2,any         acl_name      
16     IPV4 vrf1         TCP    any             LU(30)     0/0             any,179 10.10.10.2,any                   
17     IPV4 vrf1         TCP    any             LU(30)     0/0             any,179 20.20.20.2,any                   
18     IPV4 vrf1         TCP    any             LU(30)     0/0             any,179 30.30.30.2,any         acl_name2     
19     IPV4 vrf1         TCP    any             LU(30)     0/0             any,179 40.40.40.2,any                   
20     IPV4 vrf2         TCP    any             LU(30)     0/0             any,179 30.30.30.2,any         acl_name2     
21     IPV4 vrf2         TCP    any             LU(30)     0/0             any,179 60.60.60.2,any

This sample shows LPTS mapped to the ACL at location 0/1/CPU0:

Note

This is applicable for Release 5.2.2.


RP/0/RSP0/CPU0:router# show lpts pifib hardware entry statistics location 0/1/CPU0  

Destination IP : 224.0.0.5
Source IP : any
Is Fragment : 0
Interface : any
M/L/T/F : 0/OSPF_MC4_FM/0/OSPF-mc-default
DestNode : 48
DestAddr : 48
SID : 9
L4 Protocol : OSPF
Source port : any
Destination Port : any
Ct : 0xc40bb2
Accepted/Dropped : 0/0
Lp/Sp : 1/0
# of TCAM entries : 1
HPo/HAr/HBu/Cir/acl: 2097420/2000pps/2000ms/2000pps/lpts1
State : Entry in TCAM
Rsp/Rtp : 10/26
----------------------------------------------------

The following sample output is from the show lpts pifib hardware entry acl vrf1 statistics location 0/0/CPU0 command on an ASR 9000 4th Generation Line Card and it shows the locations where ACL vrf1 is configured:

Router# show lpts pifib hardware entry aclname vrf1 statistics location 0/0/CPU0

Node: 0/0/CPU0:
----------------------------------------
L3 - L3 Protocol;L4 - Layer4 Protocol; Intf - Interface;
Dest - Destination Node;
LU - Local chassis fabric unicast;
LM - Local chassis fabric multicast;
RU - Multi chassis fabric unicast;
RM - Multi chassis fabric multicast;
na - Not Applicable or Not Available
 
Offset L3   VRD id   L4     Intf       Dest  Pkts/Drops  laddr,Port raddr,Port     acl name
------ ---- ------ ----- ------------ ------ ----------- ----------------------  -------------
13     IPV4  *      any    Optimized  Local    660/0       any,any any,any         vrf1
14     CLNS  *      -      Optimized  LU(30)   0/0         - -                     vrf1
15     IPV4  *      ICMP   Optimized  Local    0/0         any,any any,ECHO        vrf1
17     IPV4  *      OSPF   any        LM[6]    1/0         224.0.0.5,any any,any   vrf1
18     IPV4  *      OSPF   any        LM[6]    0/0         224.0.0.6,any any,any   vrf1
32     IPV4  *      OSPF   any        LM[6]    0/0         any,any any,any         vrf1
 
------------------------
statistics:
 
Type            Num. Entries         Pkts
------          ------------         ----
IPv4            6                    661/0
IPv6            0                    0/0
Packets accepted by deleted entries: 0
Packets dropped by deleted entries: 0
Run out of statistics counter errors: 0

This table describes the significant fields shown in the display.

Table 13. show lpts pifib hardware entry Command Field Descriptions
Field	Description
L4 Protocol	Layer 4 protocol of the entry.
VRF ID	VPN routing and forwarding (VRF) identification (vrfid) number.
Source IP	Source IP address for this entry.
Port/Type	Port or Internet Control Message Protocol (ICMP) type for this entry.
Source Port	Source port for this entry.
Is Fragment	Indicates if this entry applies to IP fragments.
Is SYN	Indicates if this entry applies to TCP SYNs.
Interface	Interface for this entry.
V/M/C/L/T/F	V—vital M—fabric multicast C—moose congestion flag L—listener tag T—minimum time-to-live F—flow type
DestNode	Destination node to which to send the packet.
DestAddr	Destination address to which to send the packet.
Sq/Dq/Ct	Sq—Ingress Shaping Queue Dq—Destination Queue Ct—Stats Counter
Accepted/Dropped	Number of packets sent to DestAddr/Number of packets dropped due to policing.

show lpts pifib hardware police

Displays all the LPTS policer entries from the pre-Internal Forwarding Information Base (PIFIB).

show lpts pifib hardware police [location {all | node-id}]

Syntax Description


location `node-id`	(Optional) Displays pre-Internal Forwarding Information Base (IFIB) information for the designated node. The `node-id` argument is entered in the rack/slot/module notation.
all	Specifies all locations.

Command Default

If no policer is configured, the default value is the configured rate.

Command Modes

EXEC mode

Command History


Release	Modification
Release 3.7.2	This command was introduced.
Release 6.2.2	XML support was introduced.
Release 6.2.2	Command output for line cards was added.

Usage Guidelines

To retrieve command outputs, the flow monitor-map and sampler-map statements must be configured and applied to the respective interface, as shown in the following example:

!
flow monitor-map fmm
record ipv4
cache entries 10000
cache timeout active 15
cache timeout inactive 5
!
sampler-map fsm
random 1 out-of 1
!
interface MgmtEth0/RSP0/CPU0/0
ipv4 address 10.20.10.10 255.255.0.0
!
interface TenGigE0/3/0/0
ipv4 address 192.168.1.1 255.255.255.0
flow ipv4 monitor fmm sampler fsm ingress
flow ipv4 monitor fmm sampler fsm egress
ipv4 access-group SLMN-DPI ingress
!

Task ID


Task ID	Operations
lpts	read

Examples

This sample output is from the show lpts pifib hardware police command with the location keyword for 0/2/CPU0:


RP/0/RSP0/CPU0:router# show lpts pifib hardware police location 0/2/CPU0 

-------------------------------------------------------------
                Node 0/2/CPU0:
-------------------------------------------------------------
 Burst = 100ms for all flow types 
-------------------------------------------------------------
FlowType               Policer Type    Cur. Rate  Def. Rate  Accepted             Dropped              TOS Value 
---------------------- ------- ------- ---------- ---------- -------------------- -------------------- ----------
unconfigured-default   0       Static  2500       2500       0                    0                    01234567            
L2TPv2-fragment        85      Static  10000      10000      0                    0                    01234567            
Fragment               1       Static  2500       2500       0                    0                    01234567            
OSPF-mc-known          2       Static  2000       2000       0                    0                    01234567            
OSPF-mc-default        3       Static  1500       1500       0                    0                    01234567            
OSPF-uc-known          4       Static  2000       2000       0                    0                    01234567            
OSPF-uc-default        5       Static  1000       1000       0                    0                    01234567            
ISIS-known             43      Static  2000       2000       0                    0                    01234567            
ISIS-default           44      Static  1500       1500       0                    0                    01234567            
BFD-known              50      Static  9600       9600       0                    0                    01234567            
BFD-default            60      Static  45340      9600       0                    0                    01234567            
BFD-MP-known           78      Static  11520      11520      0                    0                    01234567            
BFD-MP-0               79      Static  128        128        0                    0                    01234567            
BFD-BLB-known          83      Static  11520      11520      0                    0                    01234567            
BFD-BLB-0              84      Static  128        128        0                    0                    01234567            
BFD-SP-0               82      Static  512        512        0                    0                    01234567            
BGP-known              6       Static  2500       2500       0                    0                    01234567            
BGP-cfg-peer           7       Static  2000       2000       0                    0                    01234567            
BGP-default            8       Static  1500       1500       0                    0                    01234567            
PIM-mcast-default      9       Static  2000       2000       0                    0                    01234567            
PIM-mcast-known        76      Static  2000       2000       0                    0                    01234567            
PIM-ucast              10      Static  1500       1500       0                    0                    01234567            
IGMP                   11      Static  3000       3000       0                    0                    01234567            
ICMP-local             12      Static  1500       1500       0                    0                    01234567            
ICMP-app               52      Static  1500       1500       0                    0                    01234567            
ICMP-control           40      Static  1000       1000       0                    0                    01234567            
ICMP-default           53      Static  1500       1500       0                    0                    01234567            
ICMP-app-default       90      Static  1500       1500       0                    0                    01234567            
LDP-TCP-known          13      Static  2500       2500       0                    0                    01234567            
LDP-TCP-cfg-peer       14      Static  2000       2000       0                    0                    01234567            
LDP-TCP-default        15      Static  1500       1500       0                    0                    01234567            
LDP-UDP                16      Static  2000       2000       0                    0                    01234567            
All-routers            17      Static  1000       1000       0                    0                    01234567            
LMP-TCP-known          68      Static  2500       2500       0                    0                    01234567            
LMP-TCP-cfg-peer       69      Static  2000       2000       0                    0                    01234567            
LMP-TCP-default        70      Static  1500       1500       0                    0                    01234567            
LMP-UDP                71      Static  2000       2000       0                    0                    01234567            
RSVP-UDP               18      Static  2000       2000       0                    0                    01234567            
RSVP-default           54      Static  500        500        0                    0                    01234567            
RSVP-known             77      Static  7000       7000       0                    0                    01234567            
IKE                    19      Static  1000       1000       0                    0                    01234567            
IPSEC-known            20      Static  400        400        0                    0                    01234567            
IPSEC-default          21      Static  100        100        0                    0                    01234567            
IPSEC-fragment         94      Static  10000      10000      0                    0                    01234567            
MSDP-known             22      Static  300        300        0                    0                    01234567            
MSDP-cfg-peer          23      Static  200        200        0                    0                    01234567            
MSDP-default           24      Static  100        100        0                    0                    01234567            
SNMP                   25      Static  300        300        0                    0                    01234567            
SSH-known              27      Static  300        300        0                    0                    01234567            
SSH-default            28      Static  200        200        0                    0                    01234567            
HTTP-known             29      Static  400        400        0                    0                    01234567            
HTTP-default           30      Static  200        200        0                    0                    01234567            
SHTTP-known            61      Static  400        400        0                    0                    01234567            
SHTTP-default          62      Static  200        200        0                    0                    01234567            
TELNET-known           31      Static  200        200        0                    0                    01234567            
TELNET-default         32      Static  200        200        0                    0                    01234567            
CSS-known              33      Static  200        200        0                    0                    01234567            
CSS-default            34      Static  200        200        0                    0                    01234567            
RSH-known              35      Static  200        200        0                    0                    01234567            
RSH-default            36      Static  200        200        0                    0                    01234567            
UDP-known              37      Static  2500       2500       0                    0                    01234567            
UDP-listen             38      Static  2500       2500       0                    0                    01234567            
UDP-cfg-peer           55      Static  2500       2500       0                    0                    01234567            
UDP-default            63      Static  3500       3500       0                    0                    01234567            
TCP-known              56      Static  2500       2500       0                    0                    01234567            
TCP-listen             57      Static  2500       2500       0                    0                    01234567            
TCP-cfg-peer           58      Static  2000       2000       0                    0                    01234567            
TCP-default            64      Static  2000       2000       0                    0                    01234567            
Mcast-known            59      Static  2500       2500       0                    0                    01234567            
Mcast-default          65      Static  2000       2000       0                    0                    01234567            
Raw-listen             66      Static  2500       2500       0                    0                    01234567            
Raw-default            67      Static  2500       2500       0                    0                    01234567            
ip-sla                 39      Static  1000       1000       0                    0                    01234567            
EIGRP                  45      Static  1500       1500       0                    0                    01234567            
RIP                    46      Static  1500       1500       0                    0                    01234567            
L2TPv3                 41      Static  400        400        0                    0                    01234567            
PCEP                   42      Static  200        200        0                    0                    01234567            
GRE                    47      Static  10000      10000      0                    0                    01234567            
VRRP                   48      Static  1000       1000       0                    0                    01234567            
HSRP                   49      Static  400        400        0                    0                    01234567            
MPLS-oam               51      Static  250        250        0                    0                    01234567            
L2TPv2-default         72      Static  2000       2000       0                    0                    01234567            
L2TPv2-known           81      Static  2500       2500       0                    0                    01234567            
DNS                    73      Static  2000       2000       0                    0                    01234567            
RADIUS                 74      Static  2000       2000       0                    0                    01234567            
TACACS                 75      Static  2000       2000       0                    0                    01234567            
NTP-default            26      Static  200        200        0                    0                    01234567            
NTP-known              80      Static  200        200        0                    0                    01234567            
MIPv6                  88      Static  5000       5000       0                    0                    01234567            
AMT                    86      Static  4000       4000       0                    0                    01234567            
SDAC-TCP               87      Static  5000       5000       0                    0                    01234567            
RADIUS-COA             89      Static  400        400        0                    0                    01234567            
REL-UDP                91      Static  50000      50000      0                    0                    01234567            
DHCPv4                 92      Static  4000       4000       0                    0                    01234567            
DHCPv6                 93      Static  4000       4000       0                    0                    01234567            
ONEPK                  95      Static  2500       2500       0                    0                    01234567            
TPA                    96      Static  2500       2500       0                    0                    01234567            

------------------------
statistics:
Packets accepted by deleted entries: 0
Packets dropped by deleted entries: 0
Run out of statistics counter errors: 0

The XML form of the output can be retrieved as follows:

RP/0/RSP0/CPU0:router# show operational platformLPTSPIfib 
NodeTable node/NodeName/Rack=0;Slot=2;Instance=CPU0 Police xml
...
<?xml version="1.0"?>
<Response MajorVersion="1" MinorVersion="0">
    <Get>
        <Operational>
            <PlatformLPTSPIfib MajorVersion="0" MinorVersion="0">
                <NodeTable>
                    <Node>
                        <Naming>
                            <NodeName>
                                <Rack>
                                    0
                                </Rack>
                                <Slot>
                                    2
                                </Slot>
                                <Instance>
                                    CPU0
                                </Instance>
                            </NodeName>
                        </Naming>
                        <Police>
                            <police_info>
                                <Entry>
                                    <avgrate>
                                        2500
                                    </avgrate>
                                    <burst>
                                        1250
                                    </burst>
                                    <static_avgrate>
                                        2500
                                    </static_avgrate>
                                    <avgrate_type>
                                        Static
                                    </avgrate_type>
                                    <flow_type>
                                        unconfigured-default
                                    </flow_type>
                                    <accepted_stats>
                                        0
                                    </accepted_stats>
                                    <dropped_stats>
                                        0
                                    </dropped_stats>
                                    <policer>
                                        0
                                    </policer>
                                    <iptos_value>
                                        0
                                    </iptos_value>
                                    <change_type>
                                        0
                                    </change_type>
                                    <acl_config>
                                        0
                                    </acl_config>
                                    <acl_str>
                                        
                                    </acl_str>
                                    <np>
                                        0
                                    </np>
                                </Entry>
                                <Entry>
                                    <avgrate>
                                        10000
                                    </avgrate>
                                    <burst>
                                        5000
                                    </burst>
                                    <static_avgrate>
                                        10000
                                    </static_avgrate>
                                    <avgrate_type>
                                        Static
                                    </avgrate_type>
                                    <flow_type>
                                        L2TPv2-fragment
                                    </flow_type>
                                    <accepted_stats>
                                        0
                                    </accepted_stats>
                                    <dropped_stats>
                                        0
                                    </dropped_stats>
                                    <policer>
                                        85
                                    </policer>
                                    <iptos_value>
                                        0
                                    </iptos_value>
                                    <change_type>
                                        0
                                    </change_type>
                                    <acl_config>
                                        0
                                    </acl_config>
                                    <acl_str>
                                        
                                    </acl_str>
                                    <np>
                                        0
                                    </np>
                                </Entry>
                                <Entry>
                                    <avgrate>
                                        2500
                                    </avgrate>
                                    <burst>
                                        1250
                                    </burst>
                                    <static_avgrate>
                                        2500
                                    </static_avgrate>
                                    <avgrate_type>
                                        Static
                                    </avgrate_type>
                                    <flow_type>
                                        Fragment
                                    </flow_type>
                                    <accepted_stats>
                                        0
                                    </accepted_stats>
                                    <dropped_stats>
                                        0
                                    </dropped_stats>
                                    <policer>
                                        1
                                    </policer>
                                    <iptos_value>
                                        0
                                    </iptos_value>
                                    <change_type>
                                        0
                                    </change_type>
                                    <acl_config>
                                        0
                                    </acl_config>
                                    <acl_str>
                                        
                                    </acl_str>
                                    <np>
                                        0
                                    </np>
                                </Entry>
...

Examples

The following sample output displays the policer information for a given network process (NP) on a given node.

RP/0/RSP0/CPU0:router# show lpts pifib hardware police np np0 location 0/2/CPU0 
...
-------------------------------------------------------------
                Node 0/2/CPU0:
-------------------------------------------------------------
 Burst = 100ms for all flow types 
-------------------------------------------------------------
FlowType               Policer Type    Cur. Rate  Def. Rate  Accepted             Dropped              TOS Value 
---------------------- ------- ------- ---------- ---------- -------------------- -------------------- ----------
unconfigured-default   0       Static  2500       2500       0                    0                    01234567            
L2TPv2-fragment        85      Static  10000      10000      0                    0                    01234567            
Fragment               1       Static  2500       2500       0                    0                    01234567            
OSPF-mc-known          2       Static  2000       2000       0                    0                    01234567            
OSPF-mc-default        3       Static  1500       1500       0                    0                    01234567            
OSPF-uc-known          4       Static  2000       2000       0                    0                    01234567            
OSPF-uc-default        5       Static  1000       1000       0                    0                    01234567            
ISIS-known             43      Static  2000       2000       0                    0                    01234567            
ISIS-default           44      Static  1500       1500       0                    0                    01234567            
BFD-known              50      Static  9600       9600       0                    0                    01234567            
BFD-default            60      Static  45340      9600       0                    0                    01234567            
BFD-MP-known           78      Static  11520      11520      0                    0                    01234567            
BFD-MP-0               79      Static  128        128        0                    0                    01234567            
BFD-BLB-known          83      Static  11520      11520      0                    0                    01234567            
BFD-BLB-0              84      Static  128        128        0                    0                    01234567            
BFD-SP-0               82      Static  512        512        0                    0                    01234567            
BGP-known              6       Static  2500       2500       0                    0                    01234567            
BGP-cfg-peer           7       Static  2000       2000       0                    0                    01234567            
BGP-default            8       Static  1500       1500       0                    0                    01234567            
PIM-mcast-default      9       Static  2000       2000       0                    0                    01234567            
PIM-mcast-known        76      Static  2000       2000       0                    0                    01234567            
PIM-ucast              10      Static  1500       1500       0                    0                    01234567            
IGMP                   11      Static  3000       3000       0                    0                    01234567            
ICMP-local             12      Static  1500       1500       0                    0                    01234567            
ICMP-app               52      Static  1500       1500       0                    0                    01234567            
ICMP-control           40      Static  1000       1000       0                    0                    01234567            
ICMP-default           53      Static  1500       1500       0                    0                    01234567            
ICMP-app-default       90      Static  1500       1500       0                    0                    01234567            
LDP-TCP-known          13      Static  2500       2500       0                    0                    01234567            
LDP-TCP-cfg-peer       14      Static  2000       2000       0                    0                    01234567            
LDP-TCP-default        15      Static  1500       1500       0                    0                    01234567            
LDP-UDP                16      Static  2000       2000       0                    0                    01234567            
All-routers            17      Static  1000       1000       0                    0                    01234567            
LMP-TCP-known          68      Static  2500       2500       0                    0                    01234567            
LMP-TCP-cfg-peer       69      Static  2000       2000       0                    0                    01234567            
LMP-TCP-default        70      Static  1500       1500       0                    0                    01234567            
LMP-UDP                71      Static  2000       2000       0                    0                    01234567            
RSVP-UDP               18      Static  2000       2000       0                    0                    01234567            
RSVP-default           54      Static  500        500        0                    0                    01234567            
RSVP-known             77      Static  7000       7000       0                    0                    01234567            
IKE                    19      Static  1000       1000       0                    0                    01234567            
IPSEC-known            20      Static  400        400        0                    0                    01234567            
IPSEC-default          21      Static  100        100        0                    0                    01234567            
IPSEC-fragment         94      Static  10000      10000      0                    0                    01234567            
MSDP-known             22      Static  300        300        0                    0                    01234567            
MSDP-cfg-peer          23      Static  200        200        0                    0                    01234567            
MSDP-default           24      Static  100        100        0                    0                    01234567            
SNMP                   25      Static  300        300        0                    0                    01234567            
SSH-known              27      Static  300        300        0                    0                    01234567            
SSH-default            28      Static  200        200        0                    0                    01234567            
HTTP-known             29      Static  400        400        0                    0                    01234567            
HTTP-default           30      Static  200        200        0                    0                    01234567            
SHTTP-known            61      Static  400        400        0                    0                    01234567            
SHTTP-default          62      Static  200        200        0                    0                    01234567            
TELNET-known           31      Static  200        200        0                    0                    01234567            
TELNET-default         32      Static  200        200        0                    0                    01234567            
CSS-known              33      Static  200        200        0                    0                    01234567            
CSS-default            34      Static  200        200        0                    0                    01234567            
RSH-known              35      Static  200        200        0                    0                    01234567            
RSH-default            36      Static  200        200        0                    0                    01234567            
UDP-known              37      Static  2500       2500       0                    0                    01234567            
UDP-listen             38      Static  2500       2500       0                    0                    01234567            
UDP-cfg-peer           55      Static  2500       2500       0                    0                    01234567            
UDP-default            63      Static  3500       3500       0                    0                    01234567            
TCP-known              56      Static  2500       2500       0                    0                    01234567            
TCP-listen             57      Static  2500       2500       0                    0                    01234567            
TCP-cfg-peer           58      Static  2000       2000       0                    0                    01234567            
TCP-default            64      Static  2000       2000       0                    0                    01234567            
Mcast-known            59      Static  2500       2500       0                    0                    01234567            
Mcast-default          65      Static  2000       2000       0                    0                    01234567            
Raw-listen             66      Static  2500       2500       0                    0                    01234567            
Raw-default            67      Static  2500       2500       167063               9699009              01234567            
ip-sla                 39      Static  1000       1000       0                    0                    01234567            
EIGRP                  45      Static  1500       1500       0                    0                    01234567            
RIP                    46      Static  1500       1500       0                    0                    01234567            
L2TPv3                 41      Static  400        400        0                    0                    01234567            
PCEP                   42      Static  200        200        0                    0                    01234567            
GRE                    47      Static  10000      10000      0                    0                    01234567            
VRRP                   48      Static  1000       1000       0                    0                    01234567            
HSRP                   49      Static  400        400        0                    0                    01234567            
MPLS-oam               51      Static  250        250        0                    0                    01234567            
L2TPv2-default         72      Static  2000       2000       0                    0                    01234567            
L2TPv2-known           81      Static  2500       2500       0                    0                    01234567            
DNS                    73      Static  2000       2000       0                    0                    01234567            
RADIUS                 74      Static  2000       2000       0                    0                    01234567            
TACACS                 75      Static  2000       2000       0                    0                    01234567            
NTP-default            26      Static  200        200        0                    0                    01234567            
NTP-known              80      Static  200        200        0                    0                    01234567            
MIPv6                  88      Static  5000       5000       0                    0                    01234567            
AMT                    86      Static  4000       4000       0                    0                    01234567            
SDAC-TCP               87      Static  5000       5000       0                    0                    01234567            
RADIUS-COA             89      Static  400        400        0                    0                    01234567            
REL-UDP                91      Static  50000      50000      0                    0                    01234567            
DHCPv4                 92      Static  4000       4000       0                    0                    01234567            
DHCPv6                 93      Static  4000       4000       0                    0                    01234567            
ONEPK                  95      Static  2500       2500       0                    0                    01234567            
TPA                    96      Static  2500       2500       0                    0                    01234567

The XML form of the output can be retrieved as follows:

RP/0/RSP0/CPU0:router# show operational platformLPTSPIfib NodeTable 
node/NodeName/Rack=0;Slot=2;Instance=CPU0 Police xml
...
  <?xml version="1.0"?>
<Response MajorVersion="1" MinorVersion="0">
    <Get>
        <Operational>
            <PlatformLPTSPIfib MajorVersion="0" MinorVersion="0">
                <NodeTable>
                    <Node>
                        <Naming>
                            <NodeName>
                                <Rack>
                                    0
                                </Rack>
                                <Slot>
                                    2
                                </Slot>
                                <Instance>
                                    CPU0
                                </Instance>
                            </NodeName>
                        </Naming>
                        <Police>
                            <police_info>
                                <Entry>
                                    <avgrate>
                                        2500
                                    </avgrate>
                                    <burst>
                                        1250
                                    </burst>
                                    <static_avgrate>
                                        2500
                                    </static_avgrate>
                                    <avgrate_type>
                                        Static
                                    </avgrate_type>
                                    <flow_type>
                                        unconfigured-default
                                    </flow_type>
                                    <accepted_stats>
                                        0
                                    </accepted_stats>
                                    <dropped_stats>
                                        0
                                    </dropped_stats>
                                    <policer>
                                        0
                                    </policer>
                                    <iptos_value>
                                        0
                                    </iptos_value>
                                    <change_type>
                                        0
                                    </change_type>
                                    <acl_config>
                                        0
                                    </acl_config>
                                    <acl_str>
                                        
                                    </acl_str>
                                    <np>
                                        0
                                    </np>
                                </Entry>
                                <Entry>
                                    <avgrate>
                                        10000
                                    </avgrate>
                                    <burst>
                                        5000
                                    </burst>
                                    <static_avgrate>
                                        10000
                                    </static_avgrate>
                                    <avgrate_type>
                                        Static
                                    </avgrate_type>
                                    <flow_type>
                                        L2TPv2-fragment
                                    </flow_type>
                                    <accepted_stats>
                                        0
                                    </accepted_stats>
                                    <dropped_stats>
                                        0
                                    </dropped_stats>
                                    <policer>
                                        85
                                    </policer>
                                    <iptos_value>
                                        0
                                    </iptos_value>
                                    <change_type>
                                        0
                                    </change_type>
                                    <acl_config>
                                        0
                                    </acl_config>
                                    <acl_str>
                                        
                                    </acl_str>
                                    <np>
                                        0
                                    </np>
                                </Entry>
                                <Entry>
                                    <avgrate>
                                        2500
                                    </avgrate>
                                    <burst>
                                        1250
                                    </burst>
                                    <static_avgrate>
                                        2500
                                    </static_avgrate>
                                    <avgrate_type>
                                        Static
                                    </avgrate_type>
                                    <flow_type>
                                        Fragment
                                    </flow_type>
                                    <accepted_stats>
                                        0
                                    </accepted_stats>
                                    <dropped_stats>
                                        0
                                    </dropped_stats>
                                    <policer>
                                        1
                                    </policer>
                                    <iptos_value>
                                        0
                                    </iptos_value>
                                    <change_type>
                                        0
                                    </change_type>
                                    <acl_config>
                                        0
                                    </acl_config>
                                    <acl_str>
                                        
                                    </acl_str>
                                    <np>
                                        0
                                    </np>
                                </Entry>
                                <Entry>
                                    <avgrate>
                                        2000
                                    </avgrate>
                                    <burst>
                                        1000
                                    </burst>
                                    <static_avgrate>
                                        2000
                                    </static_avgrate>
                                    <avgrate_type>
                                        Static
                                    </avgrate_type>
                                    <flow_type>
                                        OSPF-mc-known
                                    </flow_type>
                                    <accepted_stats>
                                        0
                                    </accepted_stats>
                                    <dropped_stats>
                                        0
                                    </dropped_stats>
                                    <policer>
                                        2
                                    </policer>
                                    <iptos_value>
                                        0
                                    </iptos_value>
                                    <change_type>
                                        0
                                    </change_type>
                                    <acl_config>
                                        0
                                    </acl_config>
                                    <acl_str>
                                        
                                    </acl_str>
                                    <np>
                                        0
                                    </np>
                                </Entry>
                                <Entry>
                                    <avgrate>
                                        1500
                                    </avgrate>
                                    <burst>
                                        750
                                    </burst>
                                    <static_avgrate>
                                        1500
                                    </static_avgrate>
                                    <avgrate_type>
                                        Static
                                    </avgrate_type>
                                    <flow_type>
                                        OSPF-mc-default
                                    </flow_type>
                                    <accepted_stats>
                                        0
                                    </accepted_stats>
                                    <dropped_stats>
                                        0
                                    </dropped_stats>
                                    <policer>
                                        3
                                    </policer>
                                    <iptos_value>
                                        0
                                    </iptos_value>
                                    <change_type>
                                        0
                                    </change_type>
                                    <acl_config>
                                        0
                                    </acl_config>
                                    <acl_str>
                                        
                                    </acl_str>
                                    <np>
                                        0
                                    </np>
                                </Entry>
                                <Entry>
                                    <avgrate>
                                        2000
                                    </avgrate>
                                    <burst>
                                        1000
                                    </burst>
                                    <static_avgrate>
                                        2000
                                    </static_avgrate>
                                    <avgrate_type>
                                        Static
                                    </avgrate_type>
                                    <flow_type>
                                        OSPF-uc-known
                                    </flow_type>
                                    <accepted_stats>
                                        0
                                    </accepted_stats>
                                    <dropped_stats>
                                        0
                                    </dropped_stats>
                                    <policer>
                                        4
                                    </policer>
                                    <iptos_value>
                                        0
                                    </iptos_value>
                                    <change_type>
                                        0
                                    </change_type>
                                    <acl_config>
                                        0
                                    </acl_config>
                                    <acl_str>
                                        
                                    </acl_str>
                                    <np>
                                        0
                                    </np>
                                </Entry>
                                <Entry>
                                    <avgrate>
                                        1000
                                    </avgrate>
                                    <burst>
                                        500
                                    </burst>
                                    <static_avgrate>
                                        1000
                                    </static_avgrate>
                                    <avgrate_type>
                                        Static
                                    </avgrate_type>
                                    <flow_type>
                                        OSPF-uc-default
                                    </flow_type>
                                    <accepted_stats>
                                        0
                                    </accepted_stats>
                                    <dropped_stats>
                                        0
                                    </dropped_stats>
                                    <policer>
                                        5
                                    </policer>
                                    <iptos_value>
                                        0
                                    </iptos_value>
                                    <change_type>
                                        0
                                    </change_type>
                                    <acl_config>
                                        0
                                    </acl_config>
                                    <acl_str>
                                        
                                    </acl_str>
                                    <np>
                                        0
                                    </np>
                                </Entry>
...

The following table describes the significant fields shown in the display.

Table 14. show lpts pifib hardware police Command Field Descriptions
FIeld	Description
FlowType	Type of flow that is binding between a tuple and a destination.
Rate (PPS)	Policer rate in packets per second (PPS).
Accept	Number of packets that are accepted by this policer.
Drop	Number of packets that are dropped by this policer.

Related Commands


Command	Description
flow (LPTS)	Configures the policer for the LPTS flow type.
lpts pifib hardware police	Configures the ingress policers and enters pifib policer global configuration mode.

show lpts pifib hardware static-police

Displays the LPTS policer static entries from the pre-Internal Forwarding Information Base (PIFIB).

show lpts pifib hardware static-police [location {all | node-id}]

Syntax Description


location `node-id`	(Optional) Displays pre-Internal Forwarding Information Base (IFIB) information for the designated node. The `node-id` argument is entered in the rack/slot/module notation.
all	Specifies all locations.

Command Modes

EXEC mode

Command History


Release	Modification
Release 6.2.2	This command was introduced

Usage Guidelines

To retrieve command outputs, the flow monitor-map and sampler-map statements must be configured and applied to the respective interface, as shown in the following example:

!
flow monitor-map fmm
record ipv4
cache entries 10000
cache timeout active 15
cache timeout inactive 5
!
sampler-map fsm
random 1 out-of 1
!
interface MgmtEth0/RSP0/CPU0/0
ipv4 address 10.20.10.10 255.255.0.0
!
interface TenGigE0/3/0/0
ipv4 address 192.168.1.1 255.255.255.0
flow ipv4 monitor fmm sampler fsm ingress
flow ipv4 monitor fmm sampler fsm egress
ipv4 access-group SLMN-DPI ingress
!

Task ID


Task ID	Operations
lpts	read

Examples

A sample output for the command is as shown:

RP/0/RSP0/CPU0:router# show lpts pifib hardware static-police location 0/2/CPU0
...
-------------------------------------------------------------
                Node 0/2/CPU0:
-------------------------------------------------------------
 Burst = 100ms for all flow types 
-------------------------------------------------------------
Punt Reason             SID                     Flow Rate  Burst Rate Accepted             Dropped              Destination 
----------------------- ----------------------- ---------  ---------  -------------------- -------------------- ----------- 
PUNT_INVALID            NETIO_LOW               100        20         0                    0                    Local               
PUNT_ALL                NETIO_HI                1000       200        0                    0                    Local               
CDP                     NETIO_CRUCIAL           1000       200        0                    0                    Local               
PUNT_CDP_RSP            CDP                     1000       200        0                    0                    0x0030 (0/RSP0/CPU0)
PUNT_PBR_DIVERT         ARP                     1000       200        0                    0                    Local               
ARP                     ARP                     1000       200        1                    0                    Local               
RARP                    NETIO_CRUCIAL           1000       200        0                    0                    Local               
CGMP                    NETIO_CRUCIAL           1000       200        0                    0                    Local               
LOOP                    NETIO_LOW               1000       200        0                    0                    Local               
SAP_PUNT                NETIO_LOW               1000       200        0                    0                    Local               
BUNDLE_PROTO_PUNT       LACP                    1000       200        0                    0                    Local               
PUNT_BUNDLE_PROTO_RSP   LACP                    1000       200        0                    0                    0x0030 (0/RSP0/CPU0)
UNKNOWN_OSI             NETIO_LOW               1000       200        0                    0                    Local               
DIAGS                   DIAG                    1000       200        652                  0                    Local               
SNIFF                   NETIO_LOW               20000      400        0                    0                    Local               
DROP_PACKET             NETIO_LOW               100        20         0                    0                    Local               
CFM_OTHER               CFM                     5000       1000       0                    0                    Local               
CFM_OTHER_RSP_PUNT      CFM                     5000       1000       0                    0                    0x0030 (0/RSP0/CPU0)
PUNT_AN                 AN                      1000       1000       0                    0                    Local               
DHCP_SNOOP_REQ          NETIO_MED               2000       500        0                    0                    0x0030 (0/RSP0/CPU0)
DHCP_SNOOP_REPLY        NETIO_MED               2000       500        0                    0                    0x0030 (0/RSP0/CPU0)
MSTP                    MSTP                    1000       200        0                    0                    Local               
MSTP_PB                 MSTP_PB                 1000       200        0                    0                    Local               
MSTP_RSP_PUNT           MSTP                    1000       200        0                    0                    0x0030 (0/RSP0/CPU0)
MSTP_PB_RSP_PUNT        MSTP_PB                 1000       200        0                    0                    0x0030 (0/RSP0/CPU0)
MVRP_PUNT               MVRP                    1000       200        0                    0                    Local               
MVRP_PB_PUNT            MVRP_PB                 1000       200        0                    0                    Local               
MVRP_RSP_PUNT           MVRP                    1000       200        0                    0                    0x0030 (0/RSP0/CPU0)
MVRP_PB_RSP_PUNT        MVRP_PB                 1000       200        0                    0                    0x0030 (0/RSP0/CPU0)
DAI                     NETIO_MED               2000       400        0                    0                    Local               
IGMP_SNOOP              NETIO_MED               4000       2000       0                    0                    0x0030 (0/RSP0/CPU0)
PUNT_MLD_SNOOP          NETIO_MED               4000       2000       0                    0                    0x0030 (0/RSP0/CPU0)
IPSUB                   NETIO_HI                2000       400        0                    0                    Local               
PPPOE                   PPPOE                   2000       2000       0                    0                    Local               
PUNT_PPPOE_RSP          PPPOE                   2000       2000       0                    0                    0x0030 (0/RSP0/CPU0)
PUNT_PPPOE_PACKET_CONFIG_MISMATCH PPPOE                   100        20         0                    0                    Local               
PUNT_PPPOE_PACKET_CONFIG_MISMATCH_RSP PPPOE                   100        20         0                    0                    0x0030 (0/RSP0/CPU0)
PPP                     PPP                     10000      10000      0                    0                    Local               
PUNT_PPP_RSP            PPP                     10000      10000      0                    0                    0x0030 (0/RSP0/CPU0)
EFM                     EOAM                    1000       200        0                    0                    Local               
PUNT_EFM_RSP            EOAM                    1000       200        0                    0                    0x0030 (0/RSP0/CPU0)
IPv4_OPTIONS            NETIO_LOW               5000       1000       0                    0                    Local               
IPV4_PLU_PUNT           NETIO_LOW               5000       1000       0                    0                    Local               
IPV4MC_DO_ALL           NETIO_LOW               1000       1000       0                    0                    Local               
IPV4MC_DO_ALL_BUT_FWD   NETIO_LOW               1000       1000       0                    0                    Local               
PUNT_NO_MATCH           NETIO_LOW               250        200        0                    0                    Local               
IPV4_TTL_ERROR          NETIO_LOW               2000       400        0                    0                    Local               
IPV4_FRAG_NEEDED_PUNT   NETIO_LOW               1000       400        0                    0                    Local               
PPPOE_FRAG_NEEDED_PUNT  NETIO_LOW               1000       400        0                    0                    Local               
IPV4_BFD                BFD                     12800      3500       0                    0                    Local               
RP_PUNT                 NETIO_LOW               1000       1000       0                    0                    Local               
PUNT_IFIB               NETIO_LOW               20000      4000       0                    0                    Local               
PUNT_ADJ                NETIO_LOW               1000       200        1                    0                    Local               
PUNT_INLINE_SERVICE     Inline service          2000       2000       0                    0                    Local               
PUNT_OF_FSOL            PUNT_OF_FSOL_SID        2000       400        0                    0                    0x0030 (0/RSP0/CPU0)
PUNT_UNKNOWN_IFIB       NETIO_LOW               1000       200        0                    0                    Local               
PUNT_ACL_DENY           NETIO_LOW               1000       200        0                    0                    Local               
PUNT_ACL_LOG            NETIO_LOW               1000       200        0                    0                    Local               
PUNT_ACL_LOG_L2         NETIO_LOW               1000       200        0                    0                    Local               
MPLS_PLU_PUNT           NETIO_LOW               2000       400        0                    0                    Local               
MPLS_FOR_US             NETIO_LOW               1000       200        0                    0                    Local               
PUNT_VCCV_PKT           NETIO_HI                1000       200        0                    0                    Local               
PUNT_STATISTICS         NP_STATS                1000000    10000      136147               0                    Local               
MOFRR_PUNT              MOFRR                   4080       4080       0                    0                    Local               
VIDMON_PUNT             VIDMON_UPDATE           32768      8192       0                    0                    Local               
VIDMON_PUNT_FLOW_ADD    VIDMON_ADD              80         80         0                    0                    Local               
PUNT_NETFLOW_RESERVED   NETFLOW                 12500      1250       0                    0                    Local               
PUNT_DIAGS_RSP_ACT      DIAG                    1000       200        668                  0                    0x0030 (0/RSP0/CPU0)
PUNT_DIAGS_RSP_STBY     DIAG                    1000       200        0                    0                    0x0003: [rack 0, slot 0x3] 
PUNT_DIAGS_RX_BUFF      DIAG                    1000       200        0                    0                    Local               
NETIO_RP_TO_LC_CPU_PUNT NETIO_HI                5000       1000       6569                 0                    Local               
IPV6_LINK_LOCAL         NETIO_HI                2000       2000       0                    0                    Local               
IPV6_SRC_LINK_LOCAL     NETIO_HI                2000       2000       0                    0                    Local               
IPV6_HOP_BY_HOP         NETIO_LOW               5000       1000       0                    0                    Local               
IPV6_TTL_ERROR          NETIO_LOW               2000       400        0                    0                    Local               
IPV6_PLU_PUNT           NETIO_LOW               5000       1000       0                    0                    Local               
IPV6_TOO_BIG            NETIO_LOW               1000       400        0                    0                    Local               
IPV6MC_DO_ALL           NETIO_LOW               1000       1000       0                    0                    Local               
IPV6MC_DO_ALL_BUT_FWD   NETIO_LOW               1000       1000       0                    0                    Local               
IPV6_ROUT_HEAD          NETIO_LOW               1000       500        0                    0                    Local               
SYNCE_PUNT              SYNCE                   1000       200        0                    0                    Local               
PUNT_SYNCE_RSP          SYNCE                   1000       200        0                    0                    0x0030 (0/RSP0/CPU0)
CFM_CC                  CFM                     110592     110592     0                    0                    Local               
CFM_CCM_RSP_PUNT        CFM                     73728      73728      0                    0                    0x0030 (0/RSP0/CPU0)
PUNT_CLUSTER_LINKMON    CLUSTER_LINKMON         1000       200        0                    0                    Local               
PUNT_CLUSTER_DSC        CLUSTER_DSC             1000       200        0                    0                    Local               
PUNT_CLUSTER_TEST       CLUSTER_TEST            1000       200        0                    0                    Local               
PUNT_LLDP               LLDP                    1000       200        0                    0                    Local               
PUNT_LLDP_RSP           LLDP                    1000       200        0                    0                    0x0030 (0/RSP0/CPU0)
PUNT_ELMI               PUNT_ELMI_SID           700        200        0                    0                    Local               
PUNT_ERP_LC             ERP                     16000      16000      0                    0                    Local               
PUNT_ERP_RSP            ERP                     16000      16000      0                    0                    0x0030 (0/RSP0/CPU0)
PUNT_L2_IPIW_ARP        NETIO_CRUCIAL           1000       200        0                    0                    Local               
PUNT_MAC_SECURE_VIOLATION EFP_SEC_NOTIFY          2          2          0                    0                    Local               
PUNT_MAC_SECURE_VIOLATION_SHUT EFP_SEC_NOTIFY_SHUT     8          2          0                    0                    Local               
PUNT_DAI_VIOLATION      EFP_SEC_NOTIFY          2          2          0                    0                    Local               
PUNT_IPSG_VIOLATION     EFP_SEC_NOTIFY          2          2          0                    0                    Local               
PUNT_PVST               PVST                    8000       4000       0                    0                    Local               
PUNT_PVST_RSP           PVST                    8000       4000       0                    0                    0x0030 (0/RSP0/CPU0)
PUNT_HTTPR              HTTPR                   2000       2000       0                    0                    Local               
PUNT_UNCLASSIFIED       UNCLASSIFIED            2000       2000       0                    0                    Local               
PUNT_UNCLASSIFIED_RSP   UNCLASSIFIED            2000       2000       0                    0                    0x0030 (0/RSP0/CPU0)
PUNT_PPPOE_L2TPV2       L2TPV2                  2000       2000       0                    0                    Local               
PUNT_NETIO_LC_TO_RSP    NETIO_HI                5000       1000       0                    0                    0x0030 (0/RSP0/CPU0)
PUNT_UDLD               UDLD                    1000       200        0                    0                    Local               
PUNT_UDLD_RSP           UDLD                    1000       200        0                    0                    0x0030 (0/RSP0/CPU0)
PUNT_SDP                SDACP Discovery         2000       2000       0                    0                    Local               
PUNT_PTP_ETHERNET       PTP_ETHER               80000      8000       0                    0                    Local

The XML form of the output can be retrieved as shown:

RP/0/RSP0/CPU0:router# show operational platformLPTSPIfib 
NodeTable node/NodeName/Rack=0;Slot=2;Instance=CPU0 Stats xml
...
<?xml version="1.0"?>
<Response MajorVersion="1" MinorVersion="0">
    <Get>
        <Operational>
            <PlatformLPTSPIfib MajorVersion="0" MinorVersion="0">
                <NodeTable>
                    <Node>
                        <Naming>
                            <NodeName>
                                <Rack>
                                    0
                                </Rack>
                                <Slot>
                                    2
                                </Slot>
                                <Instance>
                                    CPU0
                                </Instance>
                            </NodeName>
                        </Naming>
                        <Police>
                            <police_info>
                                <Entry>
                                    <avgrate>
                                        2500
                                    </avgrate>
                                    <burst>
                                        1250
                                    </burst>
                                    <static_avgrate>
                                        2500
                                    </static_avgrate>
                                    <avgrate_type>
                                        Static
                                    </avgrate_type>
                                    <flow_type>
                                        unconfigured-default
                                    </flow_type>
                                    <accepted_stats>
                                        0
                                    </accepted_stats>
                                    <dropped_stats>
                                        0
                                    </dropped_stats>
                                    <policer>
                                        0
                                    </policer>
                                    <iptos_value>
                                        0
                                    </iptos_value>
                                    <change_type>
                                        0
                                    </change_type>
                                    <acl_config>
                                        0
                                    </acl_config>
                                    <acl_str>
                                        
                                    </acl_str>
                                    <np>
                                        0
                                    </np>
                                </Entry>
                                <Entry>
                                    <avgrate>
                                        10000
                                    </avgrate>
                                    <burst>
                                        5000
                                    </burst>
                                    <static_avgrate>
                                        10000
                                    </static_avgrate>
                                    <avgrate_type>
                                        Static
                                    </avgrate_type>
                                    <flow_type>
                                        L2TPv2-fragment
                                    </flow_type>
                                    <accepted_stats>
                                        0
                                    </accepted_stats>
                                    <dropped_stats>
                                        0
                                    </dropped_stats>
                                    <policer>
                                        85
                                    </policer>
                                    <iptos_value>
                                        0
                                    </iptos_value>
                                    <change_type>
                                        0
                                    </change_type>
                                    <acl_config>
                                        0
                                    </acl_config>
                                    <acl_str>
                                        
                                    </acl_str>
                                    <np>
                                        0
                                    </np>
                                </Entry>
                                <Entry>
                                    <avgrate>
                                        2500
                                    </avgrate>
                                    <burst>
                                        1250
                                    </burst>
                                    <static_avgrate>
                                        2500
                                    </static_avgrate>
                                    <avgrate_type>
                                        Static
                                    </avgrate_type>
                                    <flow_type>
                                        Fragment
                                    </flow_type>
                                    <accepted_stats>
                                        0
                                    </accepted_stats>
                                    <dropped_stats>
                                        0
                                    </dropped_stats>
                                    <policer>
                                        1
                                    </policer>
                                    <iptos_value>
                                        0
                                    </iptos_value>
                                    <change_type>
                                        0
                                    </change_type>
                                    <acl_config>
                                        0
                                    </acl_config>
                                    <acl_str>
                                        
                                    </acl_str>
                                    <np>
                                        0
                                    </np>
                                </Entry>
                                <Entry>
                                    <avgrate>
                                        2000
                                    </avgrate>
                                    <burst>
                                        1000
                                    </burst>
                                    <static_avgrate>
                                        2000
                                    </static_avgrate>
                                    <avgrate_type>
                                        Static
                                    </avgrate_type>
                                    <flow_type>
                                        OSPF-mc-known
                                    </flow_type>
                                    <accepted_stats>
                                        0
                                    </accepted_stats>
                                    <dropped_stats>
                                        0
                                    </dropped_stats>
                                    <policer>
                                        2
                                    </policer>
                                    <iptos_value>
                                        0
                                    </iptos_value>
                                    <change_type>
                                        0
                                    </change_type>
                                    <acl_config>
                                        0
                                    </acl_config>
                                    <acl_str>
                                        
                                    </acl_str>
                                    <np>
                                        0
                                    </np>
                                </Entry>
                                <Entry>
                                    <avgrate>
                                        1500
                                    </avgrate>
                                    <burst>
                                        750
                                    </burst>
                                    <static_avgrate>
                                        1500
                                    </static_avgrate>
                                    <avgrate_type>
                                        Static
                                    </avgrate_type>
                                    <flow_type>
                                        OSPF-mc-default
                                    </flow_type>
                                    <accepted_stats>
                                        0
                                    </accepted_stats>
                                    <dropped_stats>
                                        0
                                    </dropped_stats>
                                    <policer>
                                        3
                                    </policer>
                                    <iptos_value>
                                        0
                                    </iptos_value>
                                    <change_type>
                                        0
                                    </change_type>
                                    <acl_config>
                                        0
                                    </acl_config>
                                    <acl_str>
                                        
                                    </acl_str>
                                    <np>
                                        0
                                    </np>
                                </Entry>
                                <Entry>
                                    <avgrate>
                                        2000
                                    </avgrate>
                                    <burst>
                                        1000
                                    </burst>
                                    <static_avgrate>
                                        2000
                                    </static_avgrate>
                                    <avgrate_type>
                                        Static
                                    </avgrate_type>
                                    <flow_type>
                                        OSPF-uc-known
                                    </flow_type>
                                    <accepted_stats>
                                        0
                                    </accepted_stats>
                                    <dropped_stats>
                                        0
                                    </dropped_stats>
                                    <policer>
                                        4
                                    </policer>
                                    <iptos_value>
                                        0
                                    </iptos_value>
                                    <change_type>
                                        0
                                    </change_type>
                                    <acl_config>
                                        0
                                    </acl_config>
                                    <acl_str>
                                        
                                    </acl_str>
                                    <np>
                                        0
                                    </np>
                                </Entry>
...

This table describes the significant fields shown in the display.

Table 15. show lpts pifib hardware police Command Field Descriptions
FIeld	Description
FlowType	Type of flow that is binding between a tuple and a destination.
Rate (PPS)	Policer rate in packets per second (PPS).
Accept	Number of packets that are accepted by this policer.
Drop	Number of packets that are dropped by this policer.

Related Commands


Command	Description
flow (LPTS)	Configures the policer for the LPTS flow type.
lpts pifib hardware police	Configures the ingress policers and enters pifib policer global configuration mode.

show lpts pifib hardware usage

To display hardware table usage, use the show lpts pifib hardware usage command in EXEC mode.

show lpts pifib hardware usage [type {ipv4 | ipv6 | isis}] [location {node-id | all}]

Syntax Description


type	(Optional) Specifies the hardware entry type. Enter one of the following types: ipv4 —Specifies IPv4 entries. ipv6 —Specifies IPv6 entries. isis —Specifies ISIS entries.
location `node-id`	(Optional) Displays pre-Internal Forwarding Information Base (IFIB) information for the designated node. The `node-id` argument is entered in the rack/slot/module notation.
a ll	(Optional) Specifies all locations.

Command Default

Without the optional parameters, the show lpts pifib hardware usage command displays a brief summary of hardware entry information.

Command Modes

EXEC mode

Command History


Release	Modification
Release 3.7.2	This command was introduced.

Usage Guidelines

No specific guidelines impact the use of this command.

Task ID


Task ID	Operations
lpts	read

Examples

The following sample output is from the show lpts pifib hardware usage command with the location keyword:


RP/0/RSP0/CPU0:router# show lpts pifib hardware usage location 0/1/cpu0

Type       Size            Used            Used(%)
---------- --------------- --------------- -------
ipv4       6000            21              0.35
ipv6       4000            15              0.38
isis       4000            1               0.03

This table describes the significant fields shown in the display.

Table 16. show lpts pifib hardware usage Command Field Descriptions
Field	Description
Type	Type of pre-IFIB entry.
Size	Maximum number of entries (72-bits) allowed for the type.
Used	Number of entries in use.
Used(%)	Percentage of total entries in use.

show lpts pifib statistics

To display Pre-Internal Forwarding Information Base (Pre-IFIB) statistics, use the show lpts ifib statistics command in EXEC mode.

show lpts pifib statistics [location node-id]

Syntax Description


location `node-id`	(Optional) Displays Pre-IFIB statistics for the designated node. The `node-id` argument is entered in the rack/slot/module notation.

Command Default

No default behavior or values

Command Modes

EXEC mode

Command History


Release	Modification
Release 3.7.2	This command was introduced .

Usage Guidelines

No specific guidelines impact the use of this command.

Task ID


Task ID	Operations
lpts	read

Examples

The following sample output is from the show lpts pifib statistics command:


RP/0/RSP0/CPU0:router# show lpts pifib statistics

Packets into Pre-IFIB:80
Lookups:80
Packets delivered locally:80
Packets delivered remotely:0

This table describes the significant fields shown in the display.

Table 17. show lpts pifib statistics Command Field Descriptions
Field	Description
Packets into Pre-IFIB	Packets presented for pre-IFIB lookups.
Lookups	Packets looked up.
Packets delivered locally	Packets delivered to local applications or the local stack (n duplicated) packets duplicated for delivery to applications and the local stack.
Packets delivered remotely	Packets delivered to applications or for lookup on other RPs.

Related Commands


Command	Description
show lpts pifib	Displays information about pre-IFIB entries.

show lpts port-arbitrator statistics

To display local packet transport services (LPTS) port arbitrator statistics, use the show lpts port-arbitrator statistics command in EXEC mode.

show lpts port-arbitrator statistics

Syntax Description

This command has no keywords or arguments.

Command Default

No default behavior or values

Command Modes

EXEC mode

Command History


Release	Modification
Release 3.7.2	This command was introduced.

Usage Guidelines

No specific guidelines impact the use of this command.

Task ID


Task ID	Operations
lpts	read

Examples

The following sample output is from the show lpts port-arbitrator statistics command:


RP/0/RSP0/CPU0:router# show lpts port-arbitrator statistics

LPTS Port Arbitrator statistics:
 PA FGID-DB library statistics:
  0 FGIDs in use, 512 cached, 0 pending retries
  0 free allocation slots, 0 internal errors, 0 retry attempts
  1 FGID-DB notify callback, 0 FGID-DB errors returned
  FGID-DB permit mask: 0x7 (alloc mark rack0)
  PA API calls:
            1 init              1 realloc_done
            8 alloc             8 free
           16 join             16 leave
            8 detach
  FGID-DB API calls:
            1 register          1 clear_old
            1 alloc             0 free
           16 join             16 leave
            0 mark              1 mark_done

show lpts vrf

To display the Local Packet Transport Services (LPTS) VPN routing and forwarding (VRF) instance identification numbers and names, use the show lpts vrf command in EXEC mode.

show lpts vrf

Syntax Description

This command has no keywords or arguments.

Command Default

No default behavior or values

Command Modes

EXEC mode

Command History


Release	Modification
Release 3.7.2	This command was introduced.

Usage Guidelines

No specific guidelines impact the use of this command.

Task ID


Task ID	Operations
lpts	read

Examples

The following sample output is from the show lpts vrf command:


RP/0/RSP0/CPU0:router# show lpts vrf

VRF-ID      VRF-NAME
0x00000000  *
0x60000000  default

This table describes the significant fields shown in the display.

Table 18. show lpts vrf Command Field Descriptions
Field	Description
VRF-ID	VPN routing and forwarding (VRF) identification (vrfid) number.
VRF-NAME	Name given to the VRF.

show operational LptsIfib

To display all operational data provided as XML schema for the LPTS Internal Forwarding Information Base (IFIB), use the show operational LptsIfib command.

show operational LptsIfib [ xml]

Syntax Description


show operational LptsIfib	Displays all operational data provided as XML schema for the LPTS Internal Forwarding Information Base (IFIB).
show operational LptsIfib xml	Displays all operational data provided as XML schema for the LPTS Internal Forwarding Information Base (IFIB) in XML format.

Command Default

No default behavior or values.

Command Modes

Privileged Executive mode.

Command History


Release	Modification
Release 6.2.1	This command was introduced.

Usage Guidelines

Although the show operational command uses the schema database, the command displays the information in a string format like the other show commands. No XML setup or knowledge is required to use the command.

Examples

The following example displays a sample output for the show operational LptsIfib command.

RP/0/RSP0/CPU0:router# show operational LptsIfib 
...
[LptsIfib]
NodeTable
  Node/NodeName/Rack=0;Slot=RSP0;Instance=CPU0
    Slice
      SliceID/SliceName=raw4
        Entry/entry=0
          destination_addr: any
          source_addr: 128.9.0.0/16
          vrf_name: *
          vID: 1
          l3protocol: 1
          l4protocol: 247
          intf_name: any
          intf_handle: 0
          is_syn: 0
          opcode: DELIVER
          accepts: 0
          drops: 0
          flow_type: BFD-known
          listener_tag: IPv4_STACK
          local_flag: 0
          is_fgid: 0
          deliver_list_short: 0/0/CPU0
          deliver_list_long: 0/0/CPU0
          min_ttl: 254
          pending_ifibq_delay: 0
          sl_ifibq_delay: 0
          ifib_program_time: Mon Feb 20 2017 09:35:41.546.856

        Entry/entry=1
          destination_addr: any
          source_addr: 128.17.0.0/16
          vrf_name: *
          vID: 1
          l3protocol: 1
          l4protocol: 247
          intf_name: any
          intf_handle: 0
          is_syn: 0
          opcode: DELIVER
          accepts: 0
          drops: 0
          flow_type: BFD-known
          listener_tag: IPv4_STACK
          local_flag: 0
          is_fgid: 0
          deliver_list_short: 0/2/CPU0
          deliver_list_long: 0/2/CPU0
          min_ttl: 254
          pending_ifibq_delay: 0
          sl_ifibq_delay: 0
          ifib_program_time: Mon Feb 20 2017 09:34:19.481.414
...

The following example displays a sample output for the show operational LptsIfib command in XML format.

RP/0/RSP0/CPU0:router# show operational LptsIfib xml 
...
<?xml version="1.0"?>
<Response MajorVersion="1" MinorVersion="0">
    <Get>
        <Operational>
            <LptsIfib MajorVersion="1" MinorVersion="0">
                <NodeTable>
                    <Node>
                        <Naming>
                            <NodeName>
                                <Rack>
                                    0
                                </Rack>
                                <Slot>
                                    RSP0
                                </Slot>
                                <Instance>
                                    CPU0
                                </Instance>
                            </NodeName>
                        </Naming>
                        <Slice>
                            <SliceID>
                                <Naming>
                                    <SliceName>
                                        raw4
                                    </SliceName>
                                </Naming>
                                <Entry>
                                    <Naming>
                                        <entry>
                                            0
                                        </entry>
                                    </Naming>
                                    <destination_addr>
                                        any
                                    </destination_addr>
                                    <source_addr>
                                        128.9.0.0/16
                                    </source_addr>
                                    <vrf_name>
                                        *
                                    </vrf_name>
                                    <vID>
                                        1
                                    </vID>
                                    <l3protocol>
                                        1
                                    </l3protocol>
                                    <l4protocol>
                                        247
                                    </l4protocol>
                                    <intf_name>
                                        any
                                    </intf_name>
                                    <intf_handle>
                                        0
                                    </intf_handle>
                                    <is_syn>
                                        0
                                    </is_syn>
                                    <opcode>
                                        DELIVER
                                    </opcode>
                                    <accepts>
                                        0
                                    </accepts>
                                    <drops>
                                        0
                                    </drops>
                                    <flow_type>
                                        BFD-known
                                    </flow_type>
                                    <listener_tag>
                                        IPv4_STACK
                                    </listener_tag>
                                    <local_flag>
                                        0
                                    </local_flag>
                                    <is_fgid>
                                        0
                                    </is_fgid>
                                    <deliver_list_short>
                                        0/0/CPU0
                                    </deliver_list_short>
                                    <deliver_list_long>
                                        0/0/CPU0
                                    </deliver_list_long>
                                    <min_ttl>
                                        254
                                    </min_ttl>
                                    <pending_ifibq_delay>
                                        0
                                    </pending_ifibq_delay>
                                    <sl_ifibq_delay>
                                        0
                                    </sl_ifibq_delay>
                                    <ifib_program_time>
                                        Mon Feb 20 2017 09:35:41.546.856
                                    </ifib_program_time>
                                </Entry>

                                <Entry>
                                    <Naming>
                                        <entry>
                                            1
                                        </entry>
                                    </Naming>
                                    <destination_addr>
                                        any
                                    </destination_addr>
                                    <source_addr>
                                        128.17.0.0/16
                                    </source_addr>
                                    <vrf_name>
                                        *
                                    </vrf_name>
                                    <vID>
                                        1
                                    </vID>
                                    <l3protocol>
                                        1
                                    </l3protocol>
                                    <l4protocol>
                                        247
                                    </l4protocol>
                                    <intf_name>
                                        any
                                    </intf_name>
                                    <intf_handle>
                                        0
                                    </intf_handle>
                                    <is_syn>
                                        0
                                    </is_syn>
                                    <opcode>
                                        DELIVER
                                    </opcode>
                                    <accepts>
                                        0
                                    </accepts>
                                    <drops>
                                        0
                                    </drops>
                                    <flow_type>
                                        BFD-known
                                    </flow_type>
                                    <listener_tag>
                                        IPv4_STACK
                                    </listener_tag>
                                    <local_flag>
                                        0
                                    </local_flag>
                                    <is_fgid>
                                        0
                                    </is_fgid>
                                    <deliver_list_short>
                                        0/2/CPU0
                                    </deliver_list_short>
                                    <deliver_list_long>
                                        0/2/CPU0
                                    </deliver_list_long>
                                    <min_ttl>
                                        254
                                    </min_ttl>
                                    <pending_ifibq_delay>
                                        0
                                    </pending_ifibq_delay>
                                    <sl_ifibq_delay>
                                        0
                                    </sl_ifibq_delay>
                                    <ifib_program_time>
                                        Mon Feb 20 2017 09:34:19.481.414
                                    </ifib_program_time>
...

show operational LptsPifib

To display all operational data provided as XML schema for the LPTS Pre-Internal Forwarding Information Base (PIFIB), use the show operational LptsPifib command.

show operational LptsPifib [ xml]

Syntax Description


show operational LptsPifib	Displays all operational data provided as XML schema for the LPTS Pre-Internal Forwarding Information Base (PIFIB).
show operational LptsPifib xml	Displays all operational data provided as XML schema for the LPTS Pre-Internal Forwarding Information Base (PIFIB) in XML format.

Command Default

No default behavior or values.

Command Modes

Privileged Executive mode.

Command History


Release	Modification
Release 6.2.1	This command was introduced.

Usage Guidelines

Although the show operational command uses the schema database, the command displays the information in a string format like the other show commands. No XML setup or knowledge is required to use the command.

Examples

The following example displays a sample output for the show operational LptsPifib command.

RP/0/RSP0/CPU0:router# show operational LptsPifib 
...
[LptsPifib]
NodeTable
  Node/NodeName/Rack=0;Slot=0;Instance=CPU0
    Type
      TypeValue/pifibType=all
        Entry/entry=0
          vID: 1
          l3protocol: 3
          l4protocol: 0
          intf_handle: 0
          local_addr          local_prefix_len: 0
          remote_addr          remote_prefix_len: 0
          u_type: 0
          u_value: 0
          u_len: 0
          remote_port: 0
          is_frag: 0
          is_syn: 0
          opcode: 1
          flow_type: 8
          listener_tag: 21
          local_flag: 0
          is_fgid: 0
          deliver_list: 0
          deliver_list_str          min_ttl: 0
          accepts: 0
          drops: 0
          stale: 0
          pifib_type: 0
          utime
            tv_sec: 1479707742
            tv_nsec: 594970000

 Entry/entry=1
          vID: 1
          l3protocol: 1
          l4protocol: 0
          intf_handle: 0
          local_addr          local_prefix_len: 0
          remote_addr          remote_prefix_len: 0
          u_type: 0
          u_value: 0
          u_len: 0
          remote_port: 0
          is_frag: 1
          is_syn: 0
          opcode: 3
          flow_type: 2
          listener_tag: 4
          local_flag: 0
          is_fgid: 0
          deliver_list: 0
          deliver_list_str          min_ttl: 0
          accepts: 0
          drops: 0
          stale: 0
          pifib_type: 1
          utime
            tv_sec: 1479707742
            tv_nsec: 594942000
...

The following example displays a sample output for the show operational LptsPifib command in XML format.

RP/0/RSP0/CPU0:router# show operational LptsPifib xml 
...
<?xml version="1.0"?>
<Response MajorVersion="1" MinorVersion="0" IteratorID="1">
    <Get>
        <Operational>
            <LptsPifib MajorVersion="1" MinorVersion="2">
                <NodeTable>
                    <Node>
                        <Naming>
                            <NodeName>
                                <Rack>
                                    0
                                </Rack>
                                <Slot>
                                    RSP0
                                </Slot>
                                <Instance>
                                    CPU0
                                </Instance>
                            </NodeName>
                        </Naming>
                        <Type>
                            <TypeValue>
                                <Naming>
                                    <pifibType>
                                        all
                                    </pifibType>
                                </Naming>
                                <Entry>
                                    <Naming>
                                        <entry>
                                            0
                                        </entry>
                                    </Naming>
                                    <vrf_name>
                                        *
                                    </vrf_name>
                                    <vID>
                                        1
                                    </vID>
                                    <l3protocol>
                                        3
                                    </l3protocol>
                                    <l4protocol>
                                        0
                                    </l4protocol>
                                    <intf_name>
                                        any
                                    </intf_name>
                                    <intf_handle>
                                        0
                                    </intf_handle>
                                    <destination_addr>
                                        any
                                    </destination_addr>
                                    <source_addr>
                                        any
                                    </source_addr>
                                    <is_frag>
                                        0
                                    </is_frag>
                                    <is_syn>
                                        0
                                    </is_syn>
                                    <opcode>
                                        DELIVER
                                    </opcode>
                                    <flow_type>
                                        ISIS-default
                                    </flow_type>
                                    <listener_tag>
                                        ISIS_FM
                                    </listener_tag>
                                    <local_flag>
                                        0
                                    </local_flag>
                                    <is_fgid>
                                        0
                                    </is_fgid>
                                    <deliver_list_short>
                                        0/RSP0/CPU0
                                    </deliver_list_short>
                                    <deliver_list_long>
                                        0/RSP0/CPU0
                                    </deliver_list_long>
                                    <min_ttl>
                                        0
                                    </min_ttl>
                                    <accepts>
                                        0
                                    </accepts>
                                    <drops>
                                        0
                                    </drops>
                                    <stale>
                                        0
                                    </stale>
                                    <pifib_type>
                                        0
                                    </pifib_type>
                                    <pifib_program_time>
                                        Mon Feb 20 2017 09:32:43.830.051
                                    </pifib_program_time>
                                </Entry>

                                <Entry>
                                    <Naming>
                                        <entry>
                                            1
                                        </entry>
                                    </Naming>
                                    <vrf_name>
                                        *
                                    </vrf_name>
                                    <vID>
                                        1
                                    </vID>
                                    <l3protocol>
                                        1
                                    </l3protocol>
                                    <l4protocol>
                                        0
                                    </l4protocol>
                                    <intf_name>
                                        any
                                    </intf_name>
                                    <intf_handle>
                                        0
                                    </intf_handle>
                                    <destination_addr>
                                        any
                                    </destination_addr>
                                    <source_addr>
                                        any
                                    </source_addr>
                                    <is_frag>
                                        1
                                    </is_frag>
                                    <is_syn>
                                        0
                                    </is_syn>
                                    <opcode>
                                        REASSEMBLE
                                    </opcode>
                                    <flow_type>
                                        Fragment
                                    </flow_type>
                                    <listener_tag>
                                        IPv4_REASS
                                    </listener_tag>
                                    <local_flag>
                                        0
                                    </local_flag>
                                    <is_fgid>
                                        0
                                    </is_fgid>
                                    <deliver_list_short>
                                        na
                                    </deliver_list_short>
                                    <deliver_list_long>
                                        na
                                    </deliver_list_long>
                                    <min_ttl>
                                        0
                                    </min_ttl>
                                    <accepts>
                                        0
                                    </accepts>
                                    <drops>
                                        0
                                    </drops>
                                    <stale>
                                        0
                                    </stale>
                                    <pifib_type>
                                        1
                                    </pifib_type>
                                    <pifib_program_time>
                                        Mon Feb 20 2017 09:32:43.830.051
                                    </pifib_program_time>
                                </Entry>
...

Bias-Free Language

Results

Chapter: LPTS Commands

LPTS Commands

clear lpts ifib statistics

Syntax Description

Command Default

Command Modes

Command History

Usage Guidelines

Task ID

Examples

Related Commands

clear lpts pifib hardware statistics

Syntax Description

Command Default

Command Modes

Command History

Usage Guidelines

Task ID

Examples

Related Commands

clear lpts pifib statistics

Syntax Description

Command Default

Command Modes

Command History

Usage Guidelines

Task ID

Examples

Related Commands

flow (LPTS)

Syntax Description

Command Default

Command Modes

Command History

Usage Guidelines

Task ID

Examples

lpts pifib hardware police

Syntax Description

Command Modes

Command History

Usage Guidelines

Task ID

Examples

Related Commands

show lpts bindings

Syntax Description

Command Default

Command Modes

Command History

Usage Guidelines

Task ID

Examples

Related Commands

show lpts clients

Syntax Description

Command Default

Command History

Usage Guidelines

Task ID

Examples

Related Commands

show lpts flows

Syntax Description

Command Default

Command Modes

Command History

Usage Guidelines

Task ID

Examples

Related Commands

show lpts ifib

Syntax Description

Command Default

Command Modes

Command History

Usage Guidelines