Cisco Unified Border Element (SP Edition) Configuration Guide: Unified Model
Bias-Free Language
The documentation set for this product strives to use bias-free language. For the purposes of this documentation set, bias-free is defined as language that does not imply discrimination based on age, disability, gender, racial identity, ethnic identity, sexual orientation, socioeconomic status, and intersectionality. Exceptions may be present in the documentation due to language that is hardcoded in the user interfaces of the product software, language used based on RFP documentation, or language that is used by a referenced third-party product. Learn more about how Cisco is using Inclusive Language.
- Updated:
- July 16, 2014
Chapter: Appendix B: SIP Compliance and Interoperability
SIP Compliance and Interoperability
This appendix lists examples of Session Initiation Protocol (SIP) services and features and the type of support provided by Cisco Unified Border Element (SP Edition).
SIP Features and SBC Compliance
The following table lists some examples of SIP services and features and extent of interoperability and compliance provided by Cisco Unified Border Element (SP Edition) on the unified model.
Many of the SIP services or features in the table are listed in the draft-ietf-sipping-service-examples.txt specification.
The table covers most features offered in what are considered IP Centrex offerings from local exchange carriers and PBX (Private Branch Exchange) features. The table also includes services involving some extensions to SIP, including the REFER, SUBSCRIBE, and NOTIFY methods and the Replaces and Join headers.
Feedback