Index Numerics
100G 4-87
100G-CK-LC-C 1-36
100GE or OTU4 2-24
Card Constraints 4-111
Card Operation Modes 4-111
Card Placement Rules 4-98
Card Slot Constraints 4-89
Card Slots 4-87
Importing 2-76
Regeneration Configurations 4-113
Use Client Payg 4-2
100G-LC-C card
card constraints 4-111
operational modes 4-111, 4-113
placement rules 4-98
regeneration configurations 4-113
100G-ME-C card
card constraints 4-111
operational modes 4-111
placement rules 4-98
regeneration configurations 4-113
10X10G-LC card
card constraints 4-111
fiber-switched protection 1-6
operational modes 4-111, 4-113
placement rules 4-98
regeneration configurations 4-113
15216-EF-40-EVEN 2-14
placement rules 4-82
15216-EF-40-ODD 2-14, 4-42
placement rules 4-82
15216 FlexLayer Hybrid
configuration 2-3
15216-MD-48-EVEN
48 or 96 channel hybrid networks 4-83
placement rules 4-82
15216-MD-48-ODD
48 or 96 channel hybrid networks 4-83
placement rules 4-82
80-WXC
site design rules (table) 4-22
80-WXC-C card 4-41
A
A2A Finalized Circuit report
viewing 3-34
activate AR-XPE card 1-34
adding
fiber spans 2-14
notes 2-16
Remote Spur 4-133
sites 2-12
user profiles 1-43
adding sides
multi-degree site 2-4, 2-13
alien interface
defining 1-37
Gaussian cross-talk D-6
scale factors D-4
single-interfering cross-talk D-5
working area D-1
alien shelf placement rules 4-94
amplifier
OPT-EDFA-17 4-43, 4-45
OPT-EDFA-24 4-43, 4-45
Analyzer pane, description A-8
analyzing a network design 2-53
any-to-any, description 1-11
arranging sites 4-123
AR-XPE card 1-34
ASR 2-24
ASR Bundle 2-66
B
BoM
Excel report 2-62
BOM report
exporting 2-69
network 2-63
site 2-65
spare part 2-67
BoM report
totals 2-62
C
card constrains
100G-LC-C card 4-111
100G-ME-C card 4-111
card constraints
10X10G-LC card 4-111
CFP-LC card 4-111
card descriptions B-1
card movement rules 4-123
card placement rules 4-96
card rules 4-104
card slot constraints 4-88
CD Documentation 1-36
CD robustness 3-27
CFP-LC card
card constraints 4-111
operational modes 4-111, 4-113
placement rules 4-98
changing network state
install 2-56
upgrade 2-56
channel rules
traffic subnet 4-52
chassis
M12 1-1
M15 1-1
M2 1-1
M6 1-1
chassis placement rules 4-78
chassis selection rules 4-6
circuit, description 1-10
Cisco TransportPlanner
GUI description A-1
client-based 1+1 protection, description 1-4
client cards
licensing 1-36
Client Payg 1-36
client service support 1-6
closing a project 1-21
colorless demand 2-21
colorless omnidirectional 2-21
colorless property 2-20, 4-132
enable 2-30, 4-59
color scheme 1-24
contentionless functionality 2-21
Controller type 1-31, 4-39
copy, description 2-55
copying price lists 2-73
copy network and go back to design mode 2-55
Copy Properties 2-31
Copy ROADM demand properties 2-31
creating
Ethernet aggregated demand 2-33
maintenance center 4-53
network copy 2-55
network design JPEG 2-61
optical subnet 2-15
point-to-point demands 2-22
price lists 2-69
P-ring demands 2-25
ROADM demands 2-28
TDM aggregated demand 2-40
traffic subnet 2-17
CRS 1-8
CTP cache
deleting 1-21
D
database file
importing 1-42
deep door 1-32, 4-5
default layout, resetting 1-43
defining a third-party interface 1-37
deleting
fiber spans 4-139
network 4-139
networks 4-139
notes 4-136
price lists 2-73
sites 4-136
traffic subnet 4-138
demand
add site 4-68
add sites 4-68
mapping 2-77
remove site 4-68
remove sites 4-68
demand, description 1-11
Design-Analyzed state, description 2-54
design state, description 2-54
Documentation
CD 1-36
Paper 1-36
door 1-32, 4-5
double ring site arrangement 4-126
E
EDFA amplifiers 4-43, 4-45
edit channel plan
traffic subnet 4-52
editing
Ethernet aggregated demand 4-60
fiber spans 4-69, 4-72
network parameters 4-1
point-to-point demand 4-53
P-ring demand 4-56
project parameters 4-1
ROADM demand 4-58
service demand 4-51
side label 4-51
sides, sides
editing 4-131
sites 4-3
sites, sites
editing 4-130
TDM aggregated demand 4-64
EDRA 4-43
PRE, BST and RAMAN 4-43
ellipse site arrangement 4-123
Enable NCS 1-29
NCS PIDs 2-9
Encryption
Available Service Types 1-8
Card Constraints 4-113
Card Operation Modes 4-113
Card Regeneration Configurations 4-113
enabling and disabling 2-23
ROADM Platform Parameters 2-32
Supported Plugables B-7
Viewing layout of single site 3-19
Ethernet aggregated demand
creating 2-33
editing 4-60
Ethernet Aggregated Demand report 3-32
export
network 2-76
xml to CTP 2-76
exporting
BOM 2-69
fiber spans 4-75
Export XML 2-76
F
FDCU 1-35, 4-44, 4-46, 4-49
fiber
mapping 2-77
fiber spans
adding a span 2-14
deleting 4-139
editing 4-69, 4-72
exporting 4-75
Fiber-switched protection 1-5
fiber-switched protection, description 1-5
Filler card 4-38
FLD-4 units 4-50
Flexible Site Type 4-42
FlexLayer placement rules 4-96
G
Gaussian cross-talk D-6
Global Discount 1-36
graphical display, setting 1-23
guard band 1-33
H
Hide BoM discount 1-36
Hide BoM price 1-36
hybrid configuration 1-44
I
import
network 2-76, 2-77
xml to node 2-78
importing
database files 1-42
Osmine configuration file 1-43
Sherpa design 2-74
Importing Osmine Configuration File 1-43
Include SW License 1-36
Inline DCU
Flex SMR 2-86
Install-Analyzed state, description 2-55
Installation Parameters report 3-5
Installing CTP 1-17
Linux 1-17
Windows 1-17
Install state, description 2-55
interface operative area D-1
Internal Connections report 3-8
J
JPEG, network design 2-61
L
layout adjustments
constraints 4-121
M2 4-120
layout report 3-15
layout rules
DCU 4-102
hybrid site 4-101
multidegree 4-102
OIC multidegree nodes 4-104
OTS units 4-102
OXC multidegree sites 4-104
licensing
client cards 1-36
Limitations 2-80
linear topologies 5-1
linear topology 5-2
Link Availability report 3-22
loading
network 1-20
price lists 2-72
locked state 2-58
M
M2 and M6 shelf placement rules 4-93
maintenance
contracts 2-73
creating a maintenance center 4-53
Manual Regeneration 1-3
creating 2-46
map
demand 2-77
fiber 2-77
node elements 2-77
site 2-77
Maximum Rectangle View 4-127
menu bar and toolbar description A-2
meshed topology 5-3
modifying unit ID 3-16
mouse shortcuts A-10
MPO-MPO cables 1-8
MSM External Switch 4-5
multi-degree site
adding sides 2-4
multi-select 1-13
multishelf placement rules 4-90
N
network
BOM 2-63
deleting 4-139
editing 4-1
export 2-76
import 2-76, 2-77
loading 1-20
unloading 1-20
network analysis
server E-1
Network Creation wizard 2-3
network design
analyzing 2-53
constraints 1-3
creating a copy 2-55
creating a JPEG 2-61
process flow 1-9
process overview 1-3
putting a network in the Install state 2-56
putting a network in the upgrade state 2-56
state descriptions 2-54
supported client services 1-6
supported platforms 1-3
supported protection schemes 1-4
supported topologies 1-4
unlocking 2-58
Network Mgmt Tree tab
changing the appearance 1-26
Network Wide Layout Export 3-20
Network Wide Layout Export Selection
Export layout as image 3-20
Export layout data as table 3-20
Export location 3-20
Network Wide Layout summary 3-21
Overwrite all files 3-20
NE Update file, saving 3-4
NG-DWDM 2-3
Create an NG-DWDM configuration 2-3
Omni Side Type 4-131
Optical Bypass 2-23
Scalable upto Degree 4-40
Site Design Rules 4-37
Supported Topologies 2-13
Topology 2-6
node
setup from CTP 2-78
node controller 4-39
node elements
mapping 2-77
node parameters
export 2-76
limitation 2-80
import 2-76
limitation 2-80
node provisioning 2-78
node setup 2-78
notes
adding 2-16
deleting 4-136
NtVw Net# tab
changing the appearance 1-24
showing duct details 1-25
O
OCHNC circuits 2-77
omnidirectional demand 2-20
omnidirectional functionality 2-19
omnidirectional property 4-132
enable 2-29, 4-59
omnidirectional entry point 4-43, 4-131
operational modes
100G-LC-C card 4-111, 4-113
100G-ME-C card 4-111, 4-113
10X10G-LC card 4-111, 4-113
CFP-LC card 4-111, 4-113
OPT-EDFA-17 amplifier 4-43, 4-45
OPT-EDFA-24 amplifier 4-43, 4-45
optical bypass
add site 4-69
editor 4-69
remove site 4-69
optical bypass sites 4-69
optical insulators 1-29, 4-5
Optical Results report 3-24
optical subnet
creating 2-15
OSC frame type 2-11, 4-73
FE Frame 2-11, 4-73
GE Frame 2-11, 4-73
OC3 Frame 2-11, 4-73
Osmine compatible upgrading 2-61
Osmine configuration file
importing 1-43
Osmine Layout Rules 4-113, G-1
OSNR alarm
regenerating 1-34
OTU2_XP
Dual Regenerator 2-48
Dual Transponder 2-48
Mixed Mode 2-48
Protected Transponder 2-48
Single Regenerator 2-48
P
panes A-6
Paper Documentation 1-36
Pay As You Grow 1-45
bundles F-1
overview 1-45
Pay As You Grow,PAYG F-1
PAYG
licensing
client cards F-3
PAYG,PAYG
understanding 1-45
PAYG. See Pay As You Grow
PAYG license,licensing
PAYG,PAYG
licensing 1-45
penalty D-6
Per Side Installation Parameter 3-4
placement rules
100G-LC-C card 4-98
100G-ME-C card 4-98
10X10G-LC card 4-98
15216 40-Channel Mux/Demux units 4-82
15216 48-Channel Mux/Demux units 4-82
air ramp 4-79
alien shelves 4-94
AR_MXP card 4-98
AR_XP card 4-98
card slots 4-86
CFP-LC card 4-98
client shelf 4-84
controller card 4-96
DCU 4-78
external switch 4-77
M12 as node controller 4-90, 4-92
M6 as node controller 4-90, 4-92
fiber storage 4-79
FlexLayer unit 4-96
general 4-76
ITU line card 4-100
M2 4-78, 4-93
M6 4-78, 4-93
manual regeneration 4-97
multishelf 4-90
multishelf separate nodes 4-93
multishelf separate shelves 4-93
MXP card 4-100
node 4-97
one-slot card 4-86
OTS unit 4-94
OTS units 4-102
OTU2_XP card 4-97
patch panel 4-79
PSM card 4-95
rack 4-75
shelf 4-86
SMR card 4-83
two-slot card 4-86
TXP card 4-100
Y-cable 4-85
platform
setting default values 1-27
support 1-3
point-to-point demand
creating 2-22
deleting 4-138
description 1-11
editing 4-53
viewing in Project Explorer 1-13
populate shelves
from bottom 4-76
from top 4-76
power consumption 3-21
PP-MESH 3-32
price lists
copying 2-73
creating 2-69
deleting 2-73
loading or unloading 2-72
updating 2-72
viewing 2-70
viewing contracts 2-73
P-ring demand
creating 2-25
deleting 4-138
description 1-11
editing 4-56
viewing in Project Explorer 1-14
process flow 1-9
project
adding notes 2-16
closing 1-21
deleting notes 4-136
editing parameters 4-1
saving 1-21
setting default values 1-35
Project Creation wizard 2-1
Project Explorer
changing the appearance 1-24
description A-6
loaded network 1-20
unloaded network 1-20
view 1-12
project explorer
select multiple items 1-13
Properties pane, description A-7
protection support 1-4
Provision Node 2-78
R
Raman amplification 4-43, 4-45, 4-74
RAMAN-CTP 4-47
RAMAN-CTP-COP 4-47
regenerating
OSNR alarm 1-34
regeneration configurations
100G-LC-C card 4-113
100G-ME-C card 4-113
10X10G-LC card 4-113
Remote Spur 4-131
adding 4-133
duct creation 2-14
reports
BoM totals 2-62
Installation Parameters 3-5
Internal Connections 3-8
layout 3-15
Layout Table (power consumption) 3-21
Link Availability 3-22
network BOM 2-63
Optical Results 3-24
site BOM 2-65
spare part BOM 2-67
Summary 3-2
Traffic Matrix 3-11
Wavelength Routing 3-28
resetting the default layout 1-43
restricted equipment list, updating 1-32
ring topology 5-2
ROADM demand
creating 2-28
deleting 4-138
description 1-11
editing 4-58
routing strategies 1-11
viewing in Project Explorer 1-14
rules, C-band 1-28
Run Quick Analysis 1-34
S
saving
NE Update file 3-4
project 1-21
scale factors D-4
select multiple items 1-13
options 1-13
service demand
editing 4-51
setting
graphical display 1-23
platform default values 1-27
project default values 1-35
setup
node from CTP 2-78
shelf adjustments 4-122
shelf layout, adjusting 4-121
Shelf Management 1-27, 2-7, 4-4
Auto 1-27, 2-7, 4-4
Individual Shelf 1-27
Locked state 4-122
modify 4-122
Multi Shelf External Switch 1-27, 2-7, 4-4
Multi Shelf Integrated Switch 1-27, 2-7, 4-4
rules 4-90
release-upgraded network 4-92
upgraded network 4-92
Shelf Movement 4-121
Destination rack 4-121
From rack unit 4-121
Source rack 4-121
Swap 4-121
To rack unit 4-121
shelf movement rules 4-122
shelf placement rules 4-86
shelf rules 4-86
shelves placement
bottom-up approach 4-76
top-down approach 4-76
Sherpa file
importing 2-74
shortcuts A-10
side label
editing 4-51
Sides Label 1-44
single-interfering cross-talk D-5
single-span topology 5-1
site
add 4-68
add to demand 4-68
mapping 2-77
network elements 4-3
remove 4-68
remove from demand 4-68
Site Functional View 2-53
Alarms 2-54
Changing the view
Zoom In 2-54
Zoom Out 2-54
Open Site Functional View 2-54
Transponder and Muxponder connections 2-54
Zoom Out 2-54
site layout, adjusting 4-114
site properties, modify 4-128
sites
add 4-68
adding a site 2-12
add to demand 4-68
arranging 4-123
BOM 2-65
creating a maintenance center 4-53
deleting 4-136
deleting a site 4-136
editing 4-3
optical bypass
add 4-69
remove 4-69
remove 4-68
remove from demand 4-68
SMR-1 4-42
SMR-2 4-42
SMR-20 4-42
SMR-9 4-42
snake site arrangement 4-125
snapshot, network design 2-61
spare part BOM 2-67
spare parts suppliers 4-53
Split ROADM 2-81
square site arrangement 4-124
sticky 1-13
sticky selection 1-13
Summary report 3-2
T
tasks pane
description A-9
TCC type 1-31, 4-39
TDM aggregated demand
creating 2-40
editing 4-64
TDM Aggregated Demand report
Viewing 3-33
Terminal Services E-1
third-party interface
defining 1-37
Gaussian cross-talk D-6
scale factors D-4
single-interfering cross-talk D-5
working area D-1
topologies 5-1
linear 5-1, 5-2
meshed 5-3
ring 5-2
single-span 5-1
topology support 1-4
traffic
viewing 1-12, 1-13
traffic groups
description 1-11
point-to-point 1-13
P-ring 1-14
ROADM 1-14
Traffic Matrix report 3-11
traffic subnet
channel rules 4-52
creating 2-17
deleting 4-138
edit channel plan 4-52
U
Uninstalling CTP 1-18
Unit ID 3-5
unit ID for PP mesh 3-16
unloading
network 1-20
price lists 2-72
unlocking network components 2-58
unprotected minimum hop count, description 1-11
unprotected optimum optical path, description 1-11
unprotected subnet, description 1-12
updating
price lists 2-72
restricted equipment list 1-32
Upgrade-Analyzed state, description 2-55
upgrade network to design mode 2-55
Upgrade state, description 2-55
use AR-XPE card 1-34
user profiles, adding 1-43
Use Template 2-31, 4-58
V
viewing
maintenance contracts 2-73
price lists 2-70
traffic 1-12, 1-13
Viewing the ASR Bundle 2-66
VNC E-1
W
Wavelength Routing report 3-28
Wavelength Selection
Coloring Priority 1-33
Flat Grid Filling 1-33
Maximum Separation 1-34
Wavelength Usage 1-25
Wavelength usage information A-5
WSON PID 1-36, 4-2
X
xml
export to CTP 2-76
import to node 2-78
Y
Y-cable protection, description 1-4
Index
Numerics
100G 4-87
100G-CK-LC-C 1-36
100GE or OTU4 2-24
Card Constraints 4-111
Card Operation Modes 4-111
Card Placement Rules 4-98
Card Slot Constraints 4-89
Card Slots 4-87
Importing 2-76
Regeneration Configurations 4-113
Use Client Payg 4-2
100G-LC-C card
card constraints 4-111
operational modes 4-111, 4-113
placement rules 4-98
regeneration configurations 4-113
100G-ME-C card
card constraints 4-111
operational modes 4-111
placement rules 4-98
regeneration configurations 4-113
10X10G-LC card
card constraints 4-111
fiber-switched protection 1-6
operational modes 4-111, 4-113
placement rules 4-98
regeneration configurations 4-113
15216-EF-40-EVEN 2-14
placement rules 4-82
15216-EF-40-ODD 2-14, 4-42
placement rules 4-82
15216 FlexLayer Hybrid
configuration 2-3
15216-MD-48-EVEN
48 or 96 channel hybrid networks 4-83
placement rules 4-82
15216-MD-48-ODD
48 or 96 channel hybrid networks 4-83
placement rules 4-82
80-WXC
site design rules (table) 4-22
80-WXC-C card 4-41
A
A2A Finalized Circuit report
viewing 3-34
activate AR-XPE card 1-34
adding
fiber spans 2-14
notes 2-16
Remote Spur 4-133
sites 2-12
user profiles 1-43
adding sides
multi-degree site 2-4, 2-13
alien interface
defining 1-37
Gaussian cross-talk D-6
scale factors D-4
single-interfering cross-talk D-5
working area D-1
alien shelf placement rules 4-94
amplifier
OPT-EDFA-17 4-43, 4-45
OPT-EDFA-24 4-43, 4-45
Analyzer pane, description A-8
analyzing a network design 2-53
any-to-any, description 1-11
arranging sites 4-123
AR-XPE card 1-34
ASR 2-24
ASR Bundle 2-66
B
BoM
Excel report 2-62
BOM report
exporting 2-69
network 2-63
site 2-65
spare part 2-67
BoM report
totals 2-62
C
card constrains
100G-LC-C card 4-111
100G-ME-C card 4-111
card constraints
10X10G-LC card 4-111
CFP-LC card 4-111
card descriptions B-1
card movement rules 4-123
card placement rules 4-96
card rules 4-104
card slot constraints 4-88
CD Documentation 1-36
CD robustness 3-27
CFP-LC card
card constraints 4-111
operational modes 4-111, 4-113
placement rules 4-98
changing network state
install 2-56
upgrade 2-56
channel rules
traffic subnet 4-52
chassis
M12 1-1
M15 1-1
M2 1-1
M6 1-1
chassis placement rules 4-78
chassis selection rules 4-6
circuit, description 1-10
Cisco TransportPlanner
GUI description A-1
client-based 1+1 protection, description 1-4
client cards
licensing 1-36
Client Payg 1-36
client service support 1-6
closing a project 1-21
colorless demand 2-21
colorless omnidirectional 2-21
colorless property 2-20, 4-132
enable 2-30, 4-59
color scheme 1-24
contentionless functionality 2-21
Controller type 1-31, 4-39
copy, description 2-55
copying price lists 2-73
copy network and go back to design mode 2-55
Copy Properties 2-31
Copy ROADM demand properties 2-31
creating
Ethernet aggregated demand 2-33
maintenance center 4-53
network copy 2-55
network design JPEG 2-61
optical subnet 2-15
point-to-point demands 2-22
price lists 2-69
P-ring demands 2-25
ROADM demands 2-28
TDM aggregated demand 2-40
traffic subnet 2-17
CRS 1-8
CTP cache
deleting 1-21
D
database file
importing 1-42
deep door 1-32, 4-5
default layout, resetting 1-43
defining a third-party interface 1-37
deleting
fiber spans 4-139
network 4-139
networks 4-139
notes 4-136
price lists 2-73
sites 4-136
traffic subnet 4-138
demand
add site 4-68
add sites 4-68
mapping 2-77
remove site 4-68
remove sites 4-68
demand, description 1-11
Design-Analyzed state, description 2-54
design state, description 2-54
Documentation
CD 1-36
Paper 1-36
door 1-32, 4-5
double ring site arrangement 4-126
E
EDFA amplifiers 4-43, 4-45
edit channel plan
traffic subnet 4-52
editing
Ethernet aggregated demand 4-60
fiber spans 4-69, 4-72
network parameters 4-1
point-to-point demand 4-53
P-ring demand 4-56
project parameters 4-1
ROADM demand 4-58
service demand 4-51
side label 4-51
sides, sides
editing 4-131
sites 4-3
sites, sites
editing 4-130
TDM aggregated demand 4-64
EDRA 4-43
PRE, BST and RAMAN 4-43
ellipse site arrangement 4-123
Enable NCS 1-29
NCS PIDs 2-9
Encryption
Available Service Types 1-8
Card Constraints 4-113
Card Operation Modes 4-113
Card Regeneration Configurations 4-113
enabling and disabling 2-23
ROADM Platform Parameters 2-32
Supported Plugables B-7
Viewing layout of single site 3-19
Ethernet aggregated demand
creating 2-33
editing 4-60
Ethernet Aggregated Demand report 3-32
export
network 2-76
xml to CTP 2-76
exporting
BOM 2-69
fiber spans 4-75
Export XML 2-76
F
FDCU 1-35, 4-44, 4-46, 4-49
fiber
mapping 2-77
fiber spans
adding a span 2-14
deleting 4-139
editing 4-69, 4-72
exporting 4-75
Fiber-switched protection 1-5
fiber-switched protection, description 1-5
Filler card 4-38
FLD-4 units 4-50
Flexible Site Type 4-42
FlexLayer placement rules 4-96
G
Gaussian cross-talk D-6
Global Discount 1-36
graphical display, setting 1-23
guard band 1-33
H
Hide BoM discount 1-36
Hide BoM price 1-36
hybrid configuration 1-44
I
import
network 2-76, 2-77
xml to node 2-78
importing
database files 1-42
Osmine configuration file 1-43
Sherpa design 2-74
Importing Osmine Configuration File 1-43
Include SW License 1-36
Inline DCU
Flex SMR 2-86
Install-Analyzed state, description 2-55
Installation Parameters report 3-5
Installing CTP 1-17
Linux 1-17
Windows 1-17
Install state, description 2-55
interface operative area D-1
Internal Connections report 3-8
J
JPEG, network design 2-61
L
layout adjustments
constraints 4-121
M2 4-120
layout report 3-15
layout rules
DCU 4-102
hybrid site 4-101
multidegree 4-102
OIC multidegree nodes 4-104
OTS units 4-102
OXC multidegree sites 4-104
licensing
client cards 1-36
Limitations 2-80
linear topologies 5-1
linear topology 5-2
Link Availability report 3-22
loading
network 1-20
price lists 2-72
locked state 2-58
M
M2 and M6 shelf placement rules 4-93
maintenance
contracts 2-73
creating a maintenance center 4-53
Manual Regeneration 1-3
creating 2-46
map
demand 2-77
fiber 2-77
node elements 2-77
site 2-77
Maximum Rectangle View 4-127
menu bar and toolbar description A-2
meshed topology 5-3
modifying unit ID 3-16
mouse shortcuts A-10
MPO-MPO cables 1-8
MSM External Switch 4-5
multi-degree site
adding sides 2-4
multi-select 1-13
multishelf placement rules 4-90
N
network
BOM 2-63
deleting 4-139
editing 4-1
export 2-76
import 2-76, 2-77
loading 1-20
unloading 1-20
network analysis
server E-1
Network Creation wizard 2-3
network design
analyzing 2-53
constraints 1-3
creating a copy 2-55
creating a JPEG 2-61
process flow 1-9
process overview 1-3
putting a network in the Install state 2-56
putting a network in the upgrade state 2-56
state descriptions 2-54
supported client services 1-6
supported platforms 1-3
supported protection schemes 1-4
supported topologies 1-4
unlocking 2-58
Network Mgmt Tree tab
changing the appearance 1-26
Network Wide Layout Export 3-20
Network Wide Layout Export Selection
Export layout as image 3-20
Export layout data as table 3-20
Export location 3-20
Network Wide Layout summary 3-21
Overwrite all files 3-20
NE Update file, saving 3-4
NG-DWDM 2-3
Create an NG-DWDM configuration 2-3
Omni Side Type 4-131
Optical Bypass 2-23
Scalable upto Degree 4-40
Site Design Rules 4-37
Supported Topologies 2-13
Topology 2-6
node
setup from CTP 2-78
node controller 4-39
node elements
mapping 2-77
node parameters
export 2-76
limitation 2-80
import 2-76
limitation 2-80
node provisioning 2-78
node setup 2-78
notes
adding 2-16
deleting 4-136
NtVw Net# tab
changing the appearance 1-24
showing duct details 1-25
O
OCHNC circuits 2-77
omnidirectional demand 2-20
omnidirectional functionality 2-19
omnidirectional property 4-132
enable 2-29, 4-59
omnidirectional entry point 4-43, 4-131
operational modes
100G-LC-C card 4-111, 4-113
100G-ME-C card 4-111, 4-113
10X10G-LC card 4-111, 4-113
CFP-LC card 4-111, 4-113
OPT-EDFA-17 amplifier 4-43, 4-45
OPT-EDFA-24 amplifier 4-43, 4-45
optical bypass
add site 4-69
editor 4-69
remove site 4-69
optical bypass sites 4-69
optical insulators 1-29, 4-5
Optical Results report 3-24
optical subnet
creating 2-15
OSC frame type 2-11, 4-73
FE Frame 2-11, 4-73
GE Frame 2-11, 4-73
OC3 Frame 2-11, 4-73
Osmine compatible upgrading 2-61
Osmine configuration file
importing 1-43
Osmine Layout Rules 4-113, G-1
OSNR alarm
regenerating 1-34
OTU2_XP
Dual Regenerator 2-48
Dual Transponder 2-48
Mixed Mode 2-48
Protected Transponder 2-48
Single Regenerator 2-48
P
panes A-6
Paper Documentation 1-36
Pay As You Grow 1-45
bundles F-1
overview 1-45
Pay As You Grow,PAYG F-1
PAYG
licensing
client cards F-3
PAYG,PAYG
understanding 1-45
PAYG. See Pay As You Grow
PAYG license,licensing
PAYG,PAYG
licensing 1-45
penalty D-6
Per Side Installation Parameter 3-4
placement rules
100G-LC-C card 4-98
100G-ME-C card 4-98
10X10G-LC card 4-98
15216 40-Channel Mux/Demux units 4-82
15216 48-Channel Mux/Demux units 4-82
air ramp 4-79
alien shelves 4-94
AR_MXP card 4-98
AR_XP card 4-98
card slots 4-86
CFP-LC card 4-98
client shelf 4-84
controller card 4-96
DCU 4-78
external switch 4-77
M12 as node controller 4-90, 4-92
M6 as node controller 4-90, 4-92
fiber storage 4-79
FlexLayer unit 4-96
general 4-76
ITU line card 4-100
M2 4-78, 4-93
M6 4-78, 4-93
manual regeneration 4-97
multishelf 4-90
multishelf separate nodes 4-93
multishelf separate shelves 4-93
MXP card 4-100
node 4-97
one-slot card 4-86
OTS unit 4-94
OTS units 4-102
OTU2_XP card 4-97
patch panel 4-79
PSM card 4-95
rack 4-75
shelf 4-86
SMR card 4-83
two-slot card 4-86
TXP card 4-100
Y-cable 4-85
platform
setting default values 1-27
support 1-3
point-to-point demand
creating 2-22
deleting 4-138
description 1-11
editing 4-53
viewing in Project Explorer 1-13
populate shelves
from bottom 4-76
from top 4-76
power consumption 3-21
PP-MESH 3-32
price lists
copying 2-73
creating 2-69
deleting 2-73
loading or unloading 2-72
updating 2-72
viewing 2-70
viewing contracts 2-73
P-ring demand
creating 2-25
deleting 4-138
description 1-11
editing 4-56
viewing in Project Explorer 1-14
process flow 1-9
project
adding notes 2-16
closing 1-21
deleting notes 4-136
editing parameters 4-1
saving 1-21
setting default values 1-35
Project Creation wizard 2-1
Project Explorer
changing the appearance 1-24
description A-6
loaded network 1-20
unloaded network 1-20
view 1-12
project explorer
select multiple items 1-13
Properties pane, description A-7
protection support 1-4
Provision Node 2-78
R
Raman amplification 4-43, 4-45, 4-74
RAMAN-CTP 4-47
RAMAN-CTP-COP 4-47
regenerating
OSNR alarm 1-34
regeneration configurations
100G-LC-C card 4-113
100G-ME-C card 4-113
10X10G-LC card 4-113
Remote Spur 4-131
adding 4-133
duct creation 2-14
reports
BoM totals 2-62
Installation Parameters 3-5
Internal Connections 3-8
layout 3-15
Layout Table (power consumption) 3-21
Link Availability 3-22
network BOM 2-63
Optical Results 3-24
site BOM 2-65
spare part BOM 2-67
Summary 3-2
Traffic Matrix 3-11
Wavelength Routing 3-28
resetting the default layout 1-43
restricted equipment list, updating 1-32
ring topology 5-2
ROADM demand
creating 2-28
deleting 4-138
description 1-11
editing 4-58
routing strategies 1-11
viewing in Project Explorer 1-14
rules, C-band 1-28
Run Quick Analysis 1-34
S
saving
NE Update file 3-4
project 1-21
scale factors D-4
select multiple items 1-13
options 1-13
service demand
editing 4-51
setting
graphical display 1-23
platform default values 1-27
project default values 1-35
setup
node from CTP 2-78
shelf adjustments 4-122
shelf layout, adjusting 4-121
Shelf Management 1-27, 2-7, 4-4
Auto 1-27, 2-7, 4-4
Individual Shelf 1-27
Locked state 4-122
modify 4-122
Multi Shelf External Switch 1-27, 2-7, 4-4
Multi Shelf Integrated Switch 1-27, 2-7, 4-4
rules 4-90
release-upgraded network 4-92
upgraded network 4-92
Shelf Movement 4-121
Destination rack 4-121
From rack unit 4-121
Source rack 4-121
Swap 4-121
To rack unit 4-121
shelf movement rules 4-122
shelf placement rules 4-86
shelf rules 4-86
shelves placement
bottom-up approach 4-76
top-down approach 4-76
Sherpa file
importing 2-74
shortcuts A-10
side label
editing 4-51
Sides Label 1-44
single-interfering cross-talk D-5
single-span topology 5-1
site
add 4-68
add to demand 4-68
mapping 2-77
network elements 4-3
remove 4-68
remove from demand 4-68
Site Functional View 2-53
Alarms 2-54
Changing the view
Zoom In 2-54
Zoom Out 2-54
Open Site Functional View 2-54
Transponder and Muxponder connections 2-54
Zoom Out 2-54
site layout, adjusting 4-114
site properties, modify 4-128
sites
add 4-68
adding a site 2-12
add to demand 4-68
arranging 4-123
BOM 2-65
creating a maintenance center 4-53
deleting 4-136
deleting a site 4-136
editing 4-3
optical bypass
add 4-69
remove 4-69
remove 4-68
remove from demand 4-68
SMR-1 4-42
SMR-2 4-42
SMR-20 4-42
SMR-9 4-42
snake site arrangement 4-125
snapshot, network design 2-61
spare part BOM 2-67
spare parts suppliers 4-53
Split ROADM 2-81
square site arrangement 4-124
sticky 1-13
sticky selection 1-13
Summary report 3-2
T
tasks pane
description A-9
TCC type 1-31, 4-39
TDM aggregated demand
creating 2-40
editing 4-64
TDM Aggregated Demand report
Viewing 3-33
Terminal Services E-1
third-party interface
defining 1-37
Gaussian cross-talk D-6
scale factors D-4
single-interfering cross-talk D-5
working area D-1
topologies 5-1
linear 5-1, 5-2
meshed 5-3
ring 5-2
single-span 5-1
topology support 1-4
traffic
viewing 1-12, 1-13
traffic groups
description 1-11
point-to-point 1-13
P-ring 1-14
ROADM 1-14
Traffic Matrix report 3-11
traffic subnet
channel rules 4-52
creating 2-17
deleting 4-138
edit channel plan 4-52
U
Uninstalling CTP 1-18
Unit ID 3-5
unit ID for PP mesh 3-16
unloading
network 1-20
price lists 2-72
unlocking network components 2-58
unprotected minimum hop count, description 1-11
unprotected optimum optical path, description 1-11
unprotected subnet, description 1-12
updating
price lists 2-72
restricted equipment list 1-32
Upgrade-Analyzed state, description 2-55
upgrade network to design mode 2-55
Upgrade state, description 2-55
use AR-XPE card 1-34
user profiles, adding 1-43
Use Template 2-31, 4-58
V
viewing
maintenance contracts 2-73
price lists 2-70
traffic 1-12, 1-13
Viewing the ASR Bundle 2-66
VNC E-1
W
Wavelength Routing report 3-28
Wavelength Selection
Coloring Priority 1-33
Flat Grid Filling 1-33
Maximum Separation 1-34
Wavelength Usage 1-25
Wavelength usage information A-5
WSON PID 1-36, 4-2
X
xml
export to CTP 2-76
import to node 2-78
Y
Y-cable protection, description 1-4