The documentation set for this product strives to use bias-free language. For the purposes of this documentation set, bias-free is defined as language that does not imply discrimination based on age, disability, gender, racial identity, ethnic identity, sexual orientation, socioeconomic status, and intersectionality. Exceptions may be present in the documentation due to language that is hardcoded in the user interfaces of the product software, language used based on RFP documentation, or language that is used by a referenced third-party product. Learn more about how Cisco is using Inclusive Language.
Information pertaining to configuring line cards is available in the Cisco NCS 2000 Series Line Card Configuration Guide. The chapters covered within this guide are listed in the following table.
| Chapter | Description |
|---|---|
|
Includes descriptions of OSCM and OSC-CSM cards. Also provides references to related procedures. |
|
|
Includes descriptions of the optical amplifier cards. Also provides references to related procedures. |
|
|
Includes descriptions of the 4MD-xx.x cards. Also provides references to related procedures. |
|
|
Explains the Tunable Dispersion Compensating Units (T-DCU) used in DWDM networks. Also provides references to related procedures. |
|
|
Includes descriptions of the Protection Switching Module (PSM) card used in DWDM networks. Also provides references to related procedures. |
|
|
Includes descriptions of the ROADM cards. Also provides references to related procedures. |
|
|
Includes descriptions of transponder (TXP), muxponder (MXP), Xponder (GE_XP, 10GE_XP, GE_XPE and 10GE_XPE), and ADM-10G cards. Also provides references to related procedures. |
|
|
Configuring GE_XP, 10GE_XP, GE_XPE, and 10GE_XPE Cards Using PCLI |
Describes how to provision GE_XP, 10GE_XP, GE_XPE, and 10GE_XPE cards using Pseudo Command Line Interface (PCLI). |
|
Describes Pseudo-IOS command line interface (PCLI) for GE_XP, 10GE_XP, GE_XPE, and 10GE_XPE cards. |
|
|
Describes the card features. |
|
|
Contains hardware specifications for the shelf assemblies and cards. |
|
|
Describes the administrative and service states for line cards, optical payload ports, out-of-band optical service channel (OSC) ports, optical channel network connections (OCHNCs), and transponder/muxponder cards and ports. |
|
|
Explains Simple Network Management Protocol (SNMP) as implemented by the Cisco NCS. |
|
| Describes the Cisco Transport Controller (CTC) views, menus options, tool options, shortcuts, and table display options. | |
|
Describes the defaults for the network element settings for Cisco NCS 2000 Series shelf assemblies. |
Feedback