Service States
Service states include a Primary State (PST), a Primary State Qualifier (PSTQ), and one or more Secondary States (SST). The following table lists the ANSI and ETSI service state PSTs and PSTQs supported by the ONS 15454 and NCS 2000.
ANSI Primary State, Primary State Qualifier |
ETSI Primary State, Primary State Qualifier |
Definition |
IS-NR (In-Service and Normal) |
Unlocked-enabled |
The entity is fully operational and will perform as provisioned. |
OOS-AU (Out-of-Service and Autonomous) |
Unlocked-disabled |
The entity is not operational because of an autonomous event. |
OOS-AUMA (Out-of-Service and Autonomous Management) |
Locked-disabled |
The entity is not operational because of an autonomous event and has also been manually removed from service. |
OOS-MA (Out-of-Service and Management) |
Locked-enabled |
The entity has been manually removed from service. |
The following table defines the ANSI and ETSI SSTs supported by the ONS 15454 and NCS 2000.
ANSI Secondary State |
ETSI Secondary State |
Definition |
AINS |
automaticInService |
The entity is delayed before transitioning to the IS-NR (ANSI)/Unlocked-enabled (ETSI) service state. The transition to IS-NR/Unlocked-enabled depends on correction of conditions. Alarm reporting is suppressed, but traffic is carried. Raised fault conditions, whether or not their alarms are reported, can be retrieved on the Cisco Transport Controller (CTC) Conditions tab or by using the TL1 RTRV-COND command. |
DSBLD |
disabled |
The entity was manually removed from service and does not provide its provisioned functions. All services are disrupted; unable to carry traffic. |
FLT |
failed |
The entity has a raised alarm or condition. |
MEA |
mismatchOfEquipment |
An improper card is installed. For example, an installed card is not compatible with the card preprovisioning or the slot. This SST applies only to cards. |
MT |
maintenance |
The entity has been manually removed from service for a maintenance activity but still performs its provisioned functions. Alarm reporting is suppressed, but traffic is carried. Raised fault conditions, whether or not their alarms are reported, can be retrieved on the CTC Conditions tab or by using the TL1 RTRV-COND command. |
SWDL |
softwareDownload |
The card is involved in a software and database download. This SST applies only to cards. |
UAS |
unassigned |
The card is not provisioned in the database. This SST applies only to cards. |
UEQ (Unequipped) |
notInstalled |
The card is not physically present (that is, an empty slot). This SST applies only to cards. |