Device Provisioning Engine Details
|
Host Name
|
Identifies the DPE hostname.
|
Port
|
Identifies the DPE port
number from which DPE established connection to the RDU.
|
IP Address
|
Identifies the IP address of
the DPE.
|
Primary Provisioning Group(s)
|
Identifies the primary
provisioning groups that the selected DPE belongs to. This is an active link
that, if clicked, displays the Provisioning Group Details page for that
provisioning group.
|
Secondary Provisioning
Group(s)
|
Identifies the secondary
provisioning group (provided that this DPE belongs to a secondary provisioning
group) that the selected DPE belongs to. This is an active link that, if
clicked, displays the Provisioning Group Details page for that provisioning
group.
|
Properties
|
Identifies the properties
configured for the DPE.
|
Version
|
Identifies the version of DPE
software currently in use.
|
UpTime
|
Specifies the total duration
that the DPE has been operational since its last startup.
|
State
|
Identifies whether the DPE is
ready for operations. These states include:
|
Secure Communication with RDU
|
Identifies if secure
communication with the RDU is enabled or disabled.
|
Security Domain
|
Identifies the RBAC domain
assigned to the DPE, in case Instance Level Access control is enabled.
|
Protocol Services
This section specifies the
status of the TFTP and ToD protocols on the DPE.
|
TFTPv4
|
Specifies if TFTPv4 is
enabled or disabled on the DPE.
|
TFTPv6
|
Specifies if TFTPv6 is
enabled or disabled on the DPE.
|
TODv4
|
Specifies if ToDv4 is enabled
or disabled on the DPE.
|
TODv6
|
Specifies if ToDv6 is enabled
or disabled on the DPE.
|
Registered Capabilities
This section specifies the
capabilities that all DPEs in this provisioning group registered with the RDU.
|
IPv4 - DOCSIS 1.0/1.1
|
Identifies whether the DOCSIS
1.0 and 1.1 versions are enabled on this DPE in the IPv4 mode.
|
IPv4 - DOCSIS 2.0
|
Identifies whether the DOCSIS
2.0 version is enabled on this DPE in the IPv4 mode.
|
IPv4 - DOCSIS 3.0
|
Identifies whether the DOCSIS
3.0 version is enabled on this DPE in the IPv4 mode.
|
IPv4 - PacketCable
|
Identifies whether the
PacketCable voice technology is enabled on this DPE in IPv4 mode.
|
IPv4 - CableHome
|
Identifies whether the home
networking technology is enabled on this DPE in IPv4 mode.
|
IPv4 - ERouter 1.0
|
Identifies whether the eRouter 1.0 is enabled on this DPE in
IPv4 mode.
|
IPv6 - DOCSIS 3.0
|
Identifies whether the DOCSIS
3.0 version is enabled on this DPE in the IPv6 mode.
|
IPv6 -
PacketCable 2.0
|
Identifies
whether PacketCable voice technology is enabled on this DPE in IPv6 mode.
PacketCable 2.0.
|
IPv6 - ERouter 1.0
|
Identifies whether the eRouter 1.0 is enabled on this DPE in
IPv6 mode.
|
Dynamic TFTP Compression
|
Identifies whether dynamic
TFTP compression is enabled on this DPE. By enabling this feature, you can
compress the size of dynamic configurations that are stored at the DPE. When
used with dynamic TFTP configuration, this feature dramatically reduces the
size of the DPE cache.
Note
|
You can enable this feature
from the
Servers >
Provisioning Groups page but only when all DPEs in the provisioning group
support it. For details, see
Provisioning
Group Capabilities.
|
|
Extended TFTP Config Filename
|
Identifies whether Extended
TFTP Config Filename is enabled on this DPE. If you enable this feature, the
dynamic TFTP file names can be labeled with dynamic content (for example, COS,
vendor-make/model, CPE and so on).
|
Dynamic TFTP Config Filename Using Extensions
|
Identifies whether Dynamic TFTP Config Filename Using Extensions
is enabled on this DPE. If you enable this feature, the dynamic TFTP file names
can be labeled with dynamic content set by the extensions.
|
Log File
|
DPE Log File
|
Features the View Details
icon that if clicked displays the View Log File Contents page, which provides
details of
dpe.log.
|
Cache Statistics
|
Hits
|
Identifies the number of
cache hits that occurred since the last time the DPE was started.
|
Misses
|
Identifies the number of
cache misses that occurred since the last time the DPE was started.
|
Lease Updates
|
Identifies the number of
IPv4 and IPv6 leases that were updated.
|
Files
|
Identifies the number of
cache files that are currently stored in the DPE.
|
Configurations
|
Identifies how many device
configuration files are saved in cache.
|
TFTP Statistics v4
|
Packets Received
|
Identifies the number of
TFTPv4 packets that were received by the selected DPE.
|
Packets Dropped
|
Identifies the number of
TFTPv4 packets that were dropped because of an overloaded DPE.
|
Packets Successful
|
Identifies the number of
TFTPv4 packets that were transmitted successfully.
|
Packets Failed
|
Identifies the number of
TFTPv4 packets that failed during transmission.
|
TFTP Statistics v6
|
Packets Received
|
Identifies the number of
TFTPv6 packets that were received by the selected DPE.
|
Packets Dropped
|
Identifies the number of
TFTPv6 packets that were dropped because of an overloaded DPE.
|
Packets Successful
|
Identifies the number of
TFTPv6 packets that were transmitted successfully.
|
Packets Failed
|
Identifies the number of
TFTPv6 packets that failed during transmission.
|
Time of Day Statistics v4
|
Packets Received
|
Identifies the number of
Time of Day v4 packets that were received by the selected DPE.
|
Packets Dropped
|
Identifies the number of
Time of Day v4 packets that were dropped because of an overloaded DPE.
|
Packets Successful
|
Identifies the number of
Time of Day v4 packets that were transmitted successfully.
|
Packets Failed
|
Identifies the number of
Time of Day v4 packets that failed during transmission.
|
Time of Day Statistics v6
|
Packets Received
|
Identifies the number of
Time of Day v6 packets that were received by the selected DPE.
|
Packets Dropped
|
Identifies the number of
Time of Day v6 packets that were dropped because of an overloaded DPE.
|
Packets Successful
|
Identifies the number of
Time of Day v6 packets that were transmitted successfully.
|
Packets Failed
|
Identifies the number of
Time of Day v6 packets that failed during transmission.
|
PacketCable SNMP Statistics
|
SNMP Informs Successful
|
Identifies the number of
inform requests that were successfully sent.
|
SNMP Sets Successful
|
Identifies the number of
successful SNMP sets.
|
SNMP Configuration Informs
Successful
|
Identifies the number of
SNMP informs received from PacketCable MTAs indicating that they were
successfully provisioned.
|
SNMP Configuration Informs
Failed
|
Identifies the number of
SNMP informs received from PacketCable MTAs indicating that they failed to be
provisioned.
|
PacketCable MTA Statistics
|
MTA AP Requests Received
|
Specifies the number of
AP-REQ messages received by the DPE from the MTA.
|
MTA AP Responses Sent
|
Specifies the number of
AP-REP messages sent by the DPE to the MTA.
|
PacketCable KDC Statistics
|
KDC FQDN Requests Received
|
Specifies the number of
FQDN-REQ messages sent by the KDC to the DPE.
|
KDC FQDN Responses Sent
|
Specifies the number of
FQDN-REP messages sent by the DPE to the KDC.
|
Configured Network Interfaces
|
Provisioning Group
Communication
|
Specifies details related
to the provisioning group to which the DPE belongs.
|
IPv4 Provisioning
|
Specifies details of the
DPE interface that is configured for IPv4 provisioning. These details are:
-
IPv4 address
-
Port number
-
FQDN
Note
|
This section appears only
if the DPE interface is configured for IPv4 provisioning.
|
|
IPv6 Provisioning
|
Specifies details of the
DPE interface that is configured for IPv6 provisioning. These details are:
-
IPv6 address
-
Port number
-
FQDN
Note
|
This section appears only
if the DPE interface is configured for IPv6 provisioning.
|
|