Authorization Action
|
Unsigned 8-bit integer or
description string.
To allow authorization, the
values are:
To deny authorization, the
values are:
|
0
1
permit
deny
|
Access View Control
|
Unsigned 8-bit integer or
description string.
To include the SNMPv3 Access
View subtree from access view, the values are:
To exclude the SNMPv3 Access
View subtree from access view, the values are:
|
1
2
included
excluded
|
Access View Type
|
Unsigned 8-bit integer or
description string.
To enable read-only access,
the values are:
To enable read-write access,
the values are:
|
1
2
Read-only
Read-write
|
ActInact
|
Unsigned 8-bit integer or
description string.
To disable the TLV, the
values are:
To enable the TLV, the values
are:
|
0
1
Inactive
Active
|
BitFlag8
|
Unsigned 8-bit integer. The
output is a hexadecimal string representation of the value.
|
0xFE
|
BitFlag32
|
Unsigned 32-bit integer. The
output is a hexadecimal string representation of the value.
|
0xFFFF0000
|
Boolean
|
0 for false and 1 for true.
|
0
1
|
Byte16
|
16 bytes specified as a
hexadecimal string of 32 characters. Is typically used to represent the MIC
option of the cable modem and the CMTS. No 0x prefix is allowed.
|
None.
Prime Cable
Provisioning
automatically calculates the hash for the cable modem and CMTS MIC option.
|
Bytes
|
A series of hexadecimal
octets. Each octet must be 2 characters.
|
000102030405060708
|
CPE Access Control
|
Unsigned 8-bit integer or
description string.
To disable device access
control, the values are:
To enable device access
control, the values are:
|
0
1
Disabled
Enabled
|
DSCClassifier
|
Unsigned 8-bit integer or
DSCClassifier string name. The unsigned integers include:
-
0—DSC Add Classifier
-
1—DSC Replace Classifier
-
2—DSC Delete Classifier
|
0
|
EnableDisable
|
Unsigned 8-bit integer or
description string.
To disable, the values are:
To enable, the values are:
|
0
1
Disabled
Enabled
|
Erouter
Init Mode
|
Unsigned 8
bit integer describing the eRouter initialization mode
0: Disabled
1: IPv4
Protocol Enabled
2: IPv6
Protocol Enabled
3: Dual IP
Protocol Enabled
|
0
1
2
3
Disabled
IPv4
IPv6
Dual
|
eRouter
Initialization Mode Override
|
Unsigned 8
bit integer to override the eRouter Initialization mode
1 = Ignore
eRouter Initialization Mode TLV and keep the eRouter Disabled
0 = Follow
eRouter Initialization
|
0
1
Follow
eRouter Initialization - Mode
eRouter -
Disabled
|
Inet Address Peer
|
A one-byte
InetAddressTypeCode:
This value is followed by
an IPv4 or an IPv6 internet address.
As a result, this length is
5 bytes (1+4) for IPv4 and 17 bytes (1+16) for IPv6.
|
1,10.112.125.111
2,0:0:0:0:0:ffff:8190:3426
|
IP address
|
Four unsigned integer 8,
dot (.) separated.
|
10.10.10.1
|
IPv6 address
|
A string representation of
an IPv6 address
x:x:x:x:x:x:x:x,
where the
xs are one to four
hexadecimal digits of the eight 16-bit pieces of the address.
|
2001:db8:0:0:8:800:200c:417a
|
IPv4 or IPv6 address
|
A string representation of
an IPv4 or IPv6 address.
|
10.112.125.111
0:0:0:0:0:ffff:8190:3426
|
IP Mode
|
Unsigned 8-bit integer or
description string.
For IPv4 mode, the values
are:
For IPv6 mode, the values
are:
|
0
1
IPv4
IPv6
|
Multiple IP addresses
|
Comma-separated list of IP
addresses.
|
10.11.12.13,10.11.12.14
|
Multiple IPv6 addresses
|
Comma-separated list of
IPv6 addresses.
|
2001:db8:0:0:8:800:200c:417a,ff01:0:0:0:0:0:0:101
|
MAC address
|
Six hexadecimal octets,
colon (:) or dash (-) separated. Each octet must be exactly 2 characters.
Colons and dashes must not be mixed.
|
00:01:02:03:04:05
00-01-02-03-04-05
|
MAC address
and mask
|
Twelve octets, colon (:) or
dash (-) separated. Each octet must be 2 characters. Colons and dashes must not
be mixed. The first six octets represent the MAC address; the last six
represent the mask for the MAC address.
|
00:01:02:03:04:05:06:07:08:09:0A:0B
00-01-02-03-04-05-06-07-08-09-0A-0B
|
NoLV
|
Type only. Does not include
value or length.
|
null
|
NVTASCII
|
An ASCII string. The
encoded string will not be NULL terminated.
|
This is an ASCII string
|
OID
|
An SNMP OID string.
|
sysinfo.0
|
OIDCF
|
An SNMP OID string and an
unsigned integer (0 or 1), comma separated.
|
sysinfo.0,1
|
OnOff
|
Unsigned 8-bit integer.
To switch on the TLV, the
values are:
To switch off the TLV, the
values are:
|
0
1
On
Off
|
OUI
|
Three hexadecimal octets,
colon (:) or dash (-) separated. Each octet must be 2 characters.
|
00-00-0C
|
RFC868Time
|
Unsigned 32-bit integer
representing the RFC868 time. The output is a date-time string that uses this
format:
MM/dd/yyyy HH:mm:ss.
|
0
(representing "12/31/1899
19:00:00")
4294967295
(representing "02/07/2036
01:28:15")
|
ServiceFlow
|
Unsigned 8-bit integer or a
service flow description string. The output is a service flow that indicates:
-
0—Reserved
-
1—Undefined
(Dependent on
CMTS implementation)
-
2—Best Effort
-
3—Non-real-time polling
service
-
4—Real-time polling service
-
5—Unsolicited grant service
with activity detection
-
6—Unsolicited grant service
|
0
|
SNMPVarBind
|
An SNMP OID string, type,
and value. Each of these is comma separated. Valid types are:
-
BITS
-
Counter
-
Counter32
-
Counter64
-
Gauge
-
Gauge32
-
INTEGER
-
Integer32
-
IpAddress
-
OCTETSTRING
-
OBJECTIDENTIFIER
-
Opaque
-
TimeTicks
-
Unsigned32
Note
|
The OCTETSTRING can be a
string that will be converted to a hexadecimal notation without a trailing
NULL, octet string for example, or hexadecimal notation contained in single
quotation marks, 'aa:bb:cc' for example.
|
|
.experimental.docsDev.
docsDevMIBObjects.docsDev
NmAccessTable.docsDevNmAc
cessEntry.docsDevNmAccess
Status.1, INTEGER, 4
|
SrvChangeAct
|
Unsigned 8-bit integer that
is restricted to a range from 0 to 3, or a SrvChangeAct description. The output
for the description string is:
-
0—Add PHS Rule
-
1—Set PHS Rule
-
2—Delete PHS Rule
-
3—Delete all PHS Rules
|
0
|
Subtype
|
One or two comma-separated
unsigned integer 8.
|
12
12,14
|
Topology
Mode Encoding
|
Unsigned 8
bit integer used for subdividing an Operator-delegated IPv6 prefix
1: Favor
Depth
2: Favor
Width
|
1
2
Depth
Width
|
Transport address and mask
|
For IPv4, four-octet IP
address in dotted notation followed by the port number, separated by a comma
(,).
For IPv6, in dotted
notation or string:
-
Valid IPv6 address in
dotted notation followed by the port number, separated by comma (,).
-
A string representation of
IPv6 address, followed by the port number, separated by comma (,). For example:
x:x:x:x:x:x:x:x,1234,
where the
xs are one to four
hexadecimal digits of the eight 16-bit pieces of the address.
|
IPv4
10.112.125.111,5678
IPv6
2001.db8.0.0.8.800.200c.417a,5678
2001:db8:0:0:8:800:200c:417a,5678
|
Unsigned integer 8
|
0 to 255
|
14
|
Unsigned integer 16
|
0 to 65535
|
1244
|
Unsigned integer 32
|
0 to 4294967295
|
3455335
|
Unsigned integer 8 and
unsigned integer 16
|
One unsigned integer 8 and
one unsigned integer 16, comma separated.
|
3,12324
|
Unsigned integer 8 pair
|
Two unsigned integer 8,
comma separated.
|
1,3
|
Unsigned integer 8 triplet
|
Three unsigned integer 8,
comma separated.
|
1,2,3
|
Verify
|
Unsigned 8-bit integer
To enable verification, the
values are:
To disable verification,
the values are:
-
1
-
Don't Verify
Note
|
The definitions of true and
false for the Verify TLV are in line with the DOCSIS 1.1 specification
(Option 26.11).
|
|
0 = verify
1 = don’t verify
|
ZTASCII
|
An ASCII string. The
encoded string will be NULL terminated.
|
This is an ASCII string
|