The documentation set for this product strives to use bias-free language. For the purposes of this documentation set, bias-free is defined as language that does not imply discrimination based on age, disability, gender, racial identity, ethnic identity, sexual orientation, socioeconomic status, and intersectionality. Exceptions may be present in the documentation due to language that is hardcoded in the user interfaces of the product software, language used based on RFP documentation, or language that is used by a referenced third-party product. Learn more about how Cisco is using Inclusive Language.
The following guide covers the prerequisites that need to be met before you install Cisco Open SDN Controller (Open SDN Controller hereafter) and details the installation process. It also covers how to configure support for BGP-LS/PCEP, NETCONF, and OpenFlow.
Begin by reviewing the following section:
The following table lists what is required to install and run Cisco Open SDN Controller:
Hardware, Software, and OS Requirements |
|
Disk Space |
64 GB |
Memory |
16 GB RAM |
Processor |
Intel four-core processor |
Virtualization Software |
|