The documentation set for this product strives to use bias-free language. For the purposes of this documentation set, bias-free is defined as language that does not imply discrimination based on age, disability, gender, racial identity, ethnic identity, sexual orientation, socioeconomic status, and intersectionality. Exceptions may be present in the documentation due to language that is hardcoded in the user interfaces of the product software, language used based on RFP documentation, or language that is used by a referenced third-party product. Learn more about how Cisco is using Inclusive Language.
This guide describes how to install Cisco Network Registrar (CNR) Release 7.2 on the supported operating systems: Windows, Solaris, and Linux. It is written for the system administrators who will be installing the software, and assumes that you understand your site configuration and the basic steps for installing the software. For information on configuring and managing Cisco Network Registrar, see the User Guide for Cisco Network Registrar.
The guide is organized into the following chapters and appendixes:
Introduces CNR and provides critical system information that must be read before installing the software. |
||
Describes how to install or upgrade CNR; and how to uninstall it, stop and start servers, and troubleshoot the installation. |
||
Chapter 3 |
Installing and Upgrading Cisco Network Registrar Virtual Appliance |
Describes how to install or upgrade CNR Virtual Appliance. |
Explains how to perform a silent installation, upgrade, or uninstallation of the CNR product. |
||
Explains how to install, upgrade, or uninstall CNR if it is being used in a lab environment. |
||
Explains how to enhance the security level for Web UI. |
The CNR 7.2 documentation set consists of:
•Release Notes for Cisco Network Registrar Release 7.2
•User Guide for Cisco Network Registrar Release 7.2
•Quick Start Guide for Cisco Network Registrar Release 7.2
•Installation Guide for Cisco Network Registrar Release 7.2
•Command Reference Guide for Cisco Network Registrar Release 7.2
•Documentation Guide for Cisco Network Registrar Release 7.2
•Third Party and Open Source Licenses and Notices for Cisco Network Registrar Release 7.2
•Online help as part of the CNR web UI application.
Note We sometimes update the printed and electronic documentation after original publication. Therefore, you should also review the documentation on Cisco.com for any updates.
For information on obtaining documentation, obtaining support, providing documentation feedback, security guidelines, and also recommended aliases and general Cisco documents, see the monthly What's New in Cisco Product Documentation, which also lists all new and revised Cisco technical documentation, at:
http://www.cisco.com/en/US/docs/general/whatsnew/whatsnew.html