Managing Backup and Restore Operations
The management node hosts critical services such as Cisco VIM REST API, Cobbler for PXE, ELK for Logging/Kibana dashboard, and VMTP for the cloud validation in Cisco VIM.
The management node is not redundant during the initial Cisco VIM offering, hence it is recommended to take backup of the management node. Using the saved management node information, you can restore the management node if you are facing any issues with the platform.
Backing Up the Management Node
An administrator must maintain the number of backup snapshots on the management node. The backup of the management node is possible only after complete deployment of at least one Cisco VIM. Two copies of backup folders are maintained at the management node itself and the older copy will be overwritten when a next backup is performed.
During the backup operation, activities such as pod management, software update or upgrade, and addition or deletion or replacement of nodes cannot be performed.
The REST API and ELK services are stopped during the backup operation, the OpenStack Logs are cached on the control, compute, and storage nodes until the restoration of the management node is completed.
As part of the backup operation, two files are created: .backup_files and .backup_hash. .backup_files is a list of files that are backed up, while the second one is the hash. These two files are placed under the backup folder /var/cisco/backup_<tag>_<date-time> at the management node and also at the /var/cisco/ folder of all three controllers. These two files are used during the restore validation. When you attempt to restore from a particular backup, these two files within this backup are compared to the files that are kept in the controllers. If there is any discrepancy, the restore validation fails and you are prompted to either terminate the restore operation or continue despite the validation failure. Only one copy of the .backup_files and .backup_hash are kept at the controllers, that is every time a new backup is created, these two files are overwritten with the most recent ones. Hence the restore validation passes only when the latest backup is used for restore.
Before you begin
Save the management node information (for example, IP address of the management node) for use during the restore operation.
Ensure that you have the br_mgmt and br_api IP addresses and respective network information.
Launch a SSH session to the Cisco NFVI management node.
Navigate to the <installer-ws>/tools/mgmt/ directory.
What to do next
The backup operation takes approximately 30 minutes and creates the backup_<tag>_<date-time> directory in the /var/cisco/ path.
Copy the directory to a remote server, to recover the management node using rsync.
For example, to copy the backup directory to the remote server 220.127.116.11 /var/cisco/directory , execute the following command sequence:
# autobackup triggered as part of POD management operation rsync -e ssh -go -rtvpX --numeric-ids /var/cisco/autobackup_<version>_<date-time> email@example.com:/var/cisco/ # manual backup triggered by admin rsync -e ssh -go -rtvpX --numeric-ids /var/cisco/backup_<version>_<date-time> firstname.lastname@example.org:/var/cisco/
On the remote server, protect the backup directory for any unauthorized access as the backup files may contain sensitive information
At the remote server, change directory to where the backup directory is copied to; in this example /var/cisco/backup_<version>_<date-time>/.
To verify if the backup is not corrupted or modified, execute ./check_integrity.
Check_integrity depends on the following packages, the packages are installed on the server where check_integrity is executed.
python-prettytable python-jinja2 python-babel python-markupsafe python-setuptools pytz
Backup with Forwarding ELK Logs to External Syslog Server
When the feature Forwarding ELK Logs to External Syslog Server is enabled, during the backup process, in both the autobackup and manual backup, the ELK Logs are not collected. For manual backups, you can override by appending the -a or --add-elk option to the backup command. The -s or --skip-elk option is to skip the ELK Logs collection regardless of the forwarding feature is enabled or not.
# cd installer/tools/mgmt # ./mgmt_node_backup.py --help Usage: ./mgmt_node_backup.py [options] Options: -h, --help show this help message and exit -s, --skip-elk do not collect ELK logs during backup -a, --add-elk force to also collect ELK logs on backup