The documentation set for this product strives to use bias-free language. For the purposes of this documentation set, bias-free is defined as language that does not imply discrimination based on age, disability, gender, racial identity, ethnic identity, sexual orientation, socioeconomic status, and intersectionality. Exceptions may be present in the documentation due to language that is hardcoded in the user interfaces of the product software, language used based on RFP documentation, or language that is used by a referenced third-party product. Learn more about how Cisco is using Inclusive Language.
Cisco AVC is supported on the following platforms:
– Cisco 800 Series: C892FSP-K9, C896VA-K9, C897VA-K9, C897VAW-A-K9, C897VA-M-K9, C898EA-K9, C897VAW-E-K9, C897VAM-W-E-K9.
– Cisco ASR1000 Series Aggregation Services Routers
– Cisco ISR4400 Series Integrated Services Routers
– Cisco CSR 1000V Cloud Services Routers
For information about licensing and features for supported platforms, see:
AVC Licensed Features
Logical interfaces not supported by Cisco AVC in the current release:
Supported on Cisco IOS platforms, not supported on Cisco IOS XE platforms
– The external tunnel header is exported.
– NBAR, QoS, and performance metric calculations support pass-through tunneling.
Logical interfaces partially supported by Cisco AVC in the current release:
Only ezPM monitors can be configured on the virtual template. Static performance monitors (non-ezPM monitors) cannot be configured on the virtual template.
AVC support for VPN modes in the current release:
Supports spoke-to-spoke and hub-to-spoke topologies.
FLEXVPN does not support IPv6.
Only ezPM monitors can be configured for FLEXVPN. Static performance monitors (non-ezPM monitors) cannot be configured for FLEXVPN.
Only ezPM monitors can be configured for ezVPN. Static performance monitors (non-ezPM monitors) cannot be configured for EzVPN.