Cisco IOS GDM Command Set
The Cisco IOS GTP Director Module (GDM) provides virtual APN and server load balancing services to non-Cisco GGSNs in a GPRS network. This chapter provides a reference list for all of the GDM commands in the Cisco IOS software that are documented in this book.
For GDM configuration tasks and examples, refer to the Cisco IOS Mobile Wireless Configuration Guide.
Note The encapsulation gtp command is used in both GGSN and GTP director configuration under the virtual template interface. However, a router cannot be configured to support both GGSN and GTP director services at the same time.
The following GDM commands are documented in this book:
•clear gprs gtp-director statistics, page 30
•debug gprs gtp-director, page 309
•debug gprs gtp parsing, page 315
•encapsulation gtp, page 37
•gprs gtp-director retry-timeout, page 108
•service gprs gtp-director, page 184
•show gprs gtp-director pending-request, page 243
•show gprs gtp-director statistics, page 246