- Cisco Unified Border Element Enterprise Protocol-Independent Features and Setup
- SIP-to-SIP Extended Feature Functionality for Session Border Controllers
- Bandwidth-based Call Admission Control
- Interworking Between RSVP Capable and RSVP Incapable Networks
- Cisco Resource Reservation Protocol Agent
- SIP INFO Method for DTMF Tone Generation
- DTMF Events through SIP Signaling
- Negotiation of an Audio Codec from a List of Codecs
- Dynamic Payload Type Interworking for DTMF and Codec Packets for SIP-to-SIP Calls
- iLBC Support for SIP and H.323
- DSP-Based Functionality on the Cisco UBE Enterprise Including Transcoding and Transrating
- Acoustic Shock Protection
- Noise Reduction
- SIP Ability to Send a SIP Registration Message on a Border Element
- SIP Parameter Modification
- Session Refresh with Reinvites
- SIP Stack Portability
- Interworking of Secure RTP calls for SIP and H.323
- Cisco UBE Support for SRTP-RTP Internetworking
- SIP SRTP Fallback to Nonsecure RTP
- VoIP for IPv6
- Support for Software Media Termination Point
- Cisco Unified Communication Trusted Firewall Control
- Cisco Unified Communication Trusted Firewall Control-Version II
- Cisco Unified Communications Trusted Firewall Control - Version III
- Additional References
- Glossary
Cisco Unified Communication Trusted Firewall Control
Cisco Unified Communications Trusted Firewall Control pushes intelligent services onto the network through a Trusted Relay Point (TRP) firewall. Firewall traversal is accomplished using Session Traversal Utilities for NAT(STUN) on a TRP collocated with a Cisco Unified Communications Manager Express (Cisco Unified CME) or a Cisco Unified Border Element.
- Finding Feature Information
- Prerequisites
- Configuring Cisco Unified Communication Trusted Firewall Control
- Feature Information for Cisco Unified Communication Trusted Firewall Control
Finding Feature Information
Your software release may not support all the features documented in this module. For the latest caveats and feature information, see Bug Search Tool and the release notes for your platform and software release. To find information about the features documented in this module, and to see a list of the releases in which each feature is supported, see the feature information table at the end of this module.
Use Cisco Feature Navigator to find information about platform support and Cisco software image support. To access Cisco Feature Navigator, go to www.cisco.com/go/cfn. An account on Cisco.com is not required.
Prerequisites
Cisco Unified Border Element
- Cisco IOS Release 12.4(22)T or a later release must be installed and running on your Cisco Unified Border Element.
Cisco Unified Border Element (Enterprise)
- Cisco IOS XE Release 3.3S or a later release must be installed and running on your Cisco ASR 1000 Series Router.
Configuring Cisco Unified Communication Trusted Firewall Control
To enable this feature, see the "Cisco Unified Communications Trusted Firewall Control" feature guide.
Detailed command information for the stun, stun flowdata agent-id, stun flowdata keepalive, stun flowdata shared-secret, stun usage firewall-traversal flowdata, voice-class stun-usagecommands is located in the Cisco IOS Voice Command Reference.
Feature Information for Cisco Unified Communication Trusted Firewall Control
The following table provides release information about the feature or features described in this module. This table lists only the software release that introduced support for a given feature in a given software release train. Unless noted otherwise, subsequent releases of that software release train also support that feature.
Use Cisco Feature Navigator to find information about platform support and Cisco software image support. To access Cisco Feature Navigator, go to www.cisco.com/go/cfn. An account on Cisco.com is not required.
| Feature Name |
Releases |
Feature Information |
|---|---|---|
| Cisco Unified Communications Trusted Firewall Control |
12.4(22)T |
Cisco Unified Communications Trusted Firewall Control pushes intelligent services into the network through Trust Relay Point (TRP). The following commands were introduced or modified: stun, stun flowdata agent-id, stun flowdata keepalive, stun flowdata shared-secret, stun usage firewall-traversal flowdata, voice-class stun-usage. |
| Feature Name |
Releases |
Feature Information |
|---|---|---|
| Cisco Unified Communications Trusted Firewall Control |
Cisco IOS XE Release 3.3S |
Cisco Unified Communications Trusted Firewall Control pushes intelligent services into the network through Trust Relay Point (TRP). The following commands were introduced or modified: stun, stun flowdata agent-id, stun flowdata keepalive, stun flowdata shared-secret, stun usage firewall-traversal flowdata, voice-class stun-usage. |
Feedback