MPLS Traffic Engineering Path Link and Node Protection Configuration Guide, Cisco IOS XE 17 (Cisco ASR 900 Series)

Bias-Free Language

The documentation set for this product strives to use bias-free language. For the purposes of this documentation set, bias-free is defined as language that does not imply discrimination based on age, disability, gender, racial identity, ethnic identity, sexual orientation, socioeconomic status, and intersectionality. Exceptions may be present in the documentation due to language that is hardcoded in the user interfaces of the product software, language used based on RFP documentation, or language that is used by a referenced third-party product. Learn more about how Cisco is using Inclusive Language.

Book Contents

Find Matches in This Book

Results

Updated:: July 31, 2020

Chapter: Feature History

Feature History

Feature History

The following table lists the new and modified features supported in the MPLS Traffic Engineering Path Link and Node Protection Configuration Guide in Cisco IOS XE 17 releases.


Feature	Description
Cisco IOS XE Amsterdam 17.3.1
Static PW over P2MP	The Static Pseudowires over Point-to-Multipoint Traffic Engineering (P2MP TE) feature emulates the essential attributes of a unidirectional P2MP service. It can be used to transport layer 2 multicast services from a single source to one or more destinations. This feature is supported on the Cisco RSP2 module. This feature is supported on the Cisco RSP3 module.

Was this Document Helpful?

Feedback

Contact Cisco

Open a Support Case
(Requires a Cisco Service Contract)