Running Post Install Script
After the installation of a Stretched Cluster using the HX Data Platform Installer, run the post installation script to finalize the configuration and set the vMotion network up. You can also run this script at a future time if needed.
If you wish to run the post_install.py script later, you can run the script directly from any Control Virtual Machine (CVM) using the following procedure:
-
Log into a Cluster IP (CIP) through a SSH server.
-
Run the post_install script available at the following location:
/usr/share/springpath/storfs-misc/hx-scripts/post_install.py
-
Follow the prompts and enter the required information.