The documentation set for this product strives to use bias-free language. For the purposes of this documentation set, bias-free is defined as language that does not imply discrimination based on age, disability, gender, racial identity, ethnic identity, sexual orientation, socioeconomic status, and intersectionality. Exceptions may be present in the documentation due to language that is hardcoded in the user interfaces of the product software, language used based on RFP documentation, or language that is used by a referenced third-party product. Learn more about how Cisco is using Inclusive Language.
You can view monthly reports and customize reports for specific date ranges. Your reports use the language, locale, and time zone settings configured on the Company Information page. See Configuring Company Information for more information.
When your system is deployed or upgraded, there is no data available for any of the reports, except the Customized Details Report, until the end of the first month. In that case, the Download links and all the other reports described in this section are not available until after the end of the first month.
Your System Summary Report contains the following reports:
Service Adoption—A graph depicting the number of unique hosts and attendants over the previous three months.
User Licenses—The percentage of purchased host licenses the system is using and the number of host licenses used during the past six months. Use these numbers to predict future host license needs and adjust your license purchases accordingly. See Fulfilling Licenses by Using the License Manager for more information.
System Size—The meeting participant peak and the percentage of system size that peak usage consumed. The graph depicts the meeting participant peaks over the past three months and the expected growth rate over the next three months.
Storage—The storage usage of your data archive and recordings both as a percentage of total storage space and in total gigabytes (GB). The graph depicts the total storage over the past three months and expected growth rate over the next three months. Use this report to monitor your storage usage. To add storage space, manually copy your existing storage data archive and recordings to your new storage server before you activate it.
Note | If you have configured a storage server, this report appears. See Adding an NFS or SSH Storage Server for more information. |
Network—This report displays the following:
Your peak network bandwidth consumption in Mbps.
A graph depicting the peak network bandwidth consumption in Mbps over the past three months and the expected growth rate over the next three months (the red bar indicates maximum network bandwidth).
A pie chart indicating the percentage of bandwidth consumed by each of your system resources.
Reports draw their data from the database. The monitoring module writes 0 to the database if the bandwidth consumption is less than 1 Mbps. Therefore, a 0 in the report means that feature is not using significant network bandwidth.
System Planned Downtime & Unplanned Outage—This report displays the following:
Your average system uptime over the past three months.
The average time of your unplanned system outages over the past three months.
The average number of meetings disrupted due to outages over the past three months.
A graph depicting the planned downtime and unplanned outages over the past three months and the expected growth rate over the next three months.
Note | Increased downtime is sometimes a reflection of increased usage. Be sure to compare your downtime statistics with the usage statistics displayed in other reports. |
Your Meeting Summary Report contains the following reports:
Meeting Status—A graph depicting the meeting status over the past month, the percentage of meetings that experienced problems, and the total number of meetings held during the month. D
Meeting Size—A graph depicting the sizes of the meetings held on your system over the past month, a breakdown of the meeting sizes, and detailed information about the largest meeting held during the month.
Meeting Feature Usage—This report displays the following:
The most used feature over the past month including the total number of minutes the feature was used.
The fastest growing feature on your system over the past month including the growth rate.
A graph depicting usage in minutes for each feature on your system.
A graph depicting the growth rate of the fastest growing feature on your system.
Top Active Participant Email Domains—This report displays the following:
Peak Day and Hour—Two graphs. The first graph depicts the busiest day of the week over the past month. The second graph depicts the busiest time of day on your system over the past month.
Access Number Called—The Cisco WebEx call-in number dialed to start or join a Personal Conference meeting.
Calling Number—The phone number of the phone used to place the call.
Start Time of Call—The date and time of the call.
1st Access Code Attempted—The first invalid access code entered by the caller.
Email of 1st Access Code Owner (if available)—The email address of the user associated with the first invalid access code, if the access code is associated with a valid Cisco WebEx Meetings Server account.
2nd Access Code Attempted—The second invalid access code entered by the caller.
Email of 2nd Access Code Owner (if available)—The email address of the user associated with the second invalid access code, if the access code is associated with a valid Cisco WebEx Meetings Server account.
3rd Access Code Attempted—The third invalid access code entered by the caller.
Email of 3rd Access Code Owner (if available)—The email address of the user associated with the third invalid access code, if the access code is associated with a valid Cisco WebEx Meetings Server account.
MeetingID—Unique conference ID generated by your system when the meeting was scheduled.
Meeting Number—Cisco WebEx meeting number.
Subject—Name of the meeting configured by the host.
HostName—Meeting host name.
Start Time—Starting time and date of the meeting.
Duration—Duration of the meeting in minutes.
Number of Participants—Number of participants including hosts.
Note | If a guest or host joins a meeting twice, the system adds duplicate joins for the guest, but a single join for the host to the participant count. |
Status of each meeting
Number of Call-In Audio Minutes
Number of Call-Back Audio Minutes
Number of VoIP Minutes
Number of Video Minutes
Number of Recording Minutes
Recording Interval—Start and stop time for each recording created during the meeting.
Number of WebSharing Minutes—Total number of minutes that all participants spend in the web meeting (for example, if three participants attend the web meeting portion of a meeting that lasts 10 minutes, the number of web sharing minutes is 30).
Participants—A list of the meeting participants.
Host Platform/Browser—Version of the operating system and browser the host was using when the host started a Cisco WebEx meeting.
Host IP Address—IP address used by the host when the host started a Cisco WebEx meeting.
TrackingCodes—After changing tracking code settings, you must wait until after midnight (GMT) for the changes to be effective. Until then, the old tracking codes are valid.
Host Email—Email address of the meeting host.
A consumption of 0 (zero) indicates that the feature was not used on that date. A consumption of less than 1 is displayed if less than 1 Mbps was consumed on the specified date.
Network bandwidth consumption for video includes video from cameras and video file sharing from web meetings. If video is disabled for your site, you cannot turn on a camera for video but you can still share video files. This results in some network bandwidth consumption for video which is included in reports. This is the only situation that causes network bandwidth consumption for video when video is disabled for a site.
Storage Capacity Utilization Report—Displays the total disk space used as of the listed date and the number of recorded meetings that occurred for each date.
Note | This report is only included if you have configured a storage server. See Adding an NFS or SSH Storage Server for more information. |
Participants Report—The history of meetings, the time each meeting started, and the tracking code applied for each meeting.
Meeting ID—Unique conference ID generated by your system when the meeting was scheduled.
Conference Name—Name of the meeting the host entered in the What field when scheduling a meeting.
Username—Host's username.
Joining Time—Time and date when a user joined a Cisco WebEx meeting.
Leaving Time—Time and date when a user left a Cisco WebEx meeting.
Duration—Amount of time, in minutes, a user participated in a Cisco WebEx meeting.
Platform/Browser—Version of the operating system and browser used by a host when the host started a Cisco WebEx meeting.
Client IP Address—IP address of the WebEx client used by a host or participant to start or attend a Cisco WebEx meeting.
Datacenter—Name of the Data Center on which the meeting was held. This field is populated only in Multi-data Center (MDC) systems.
Session Start Time—Time the session started.
Session End Time—Time the session ended.
Type of Session—Session type can be video (web sharing), VoIP (telephony connection), call-in, or call-back.
Session Duration—Length of time the session lasted.
Phone Number—Phone number of the phone used to place the call in to the WebEx meeting.
Tel. Server—Telephone server.
System Downtime Report—System downtime information for the specified period and includes the following fields:
Category—Out of Service or Maintenance. Out of Service indicates an outage. Maintenance indicates a planned maintenance window.
Service—The affected features.
Start of Downtime—Date and time the downtime started.
End of Downtime—Date and time the downtime ended.
Number of Meetings Disrupted—Number of meetings disrupted. This field is blank for Maintenance downtimes because those are planned. If no meetings were scheduled during an Out Of Service downtime, the number is 0.
User License Utilization Report—There are two versions of this report. One version displays license usage for the past 30 days and is titled UserLicenseUtilizationReportForLastMonth.csv and the other version displays license usage for the current month (the first day of the month through the current day) and is titled UserLicenseUtilizationForThisMonth.csv. Each of these reports includes the following fields:
User Name—User name of the meeting host.
E-mail address—Email address of the meeting host.
Meeting ID—Unique conference ID generated by your system when the meeting was scheduled.
Meeting Number—Cisco WebEx meeting number.
Start Time—Date and time the meeting started.
Simultaneous Meeting—Number of simultaneous meetings scheduled by the same user. Each simultaneous meeting that is recorded results in an additional line added to this report for the user who scheduled the simultaneous meeting.