Visualize Flexible Algorithm
Crosswork allows you to visualize Flexible Algorithm nodes and links that have been configured manually in your network.
Before you begin
-
You must configure Flexible Algorithms in your network. See SR configuration documentation for your specific device to view descriptions and supported configuration commands (for example: Asr900 Flex Algorithm)
-
You should know the Flexible Algorithm IDs that are used in your network. To view Flexible Algorithm membership, see Find Flexible Algorithms for Links and Devices.
Note |
You cannot visualize Flexible Algorithms if a Flexible Algorithm ID is the same across different domains. |
Procedure
Step 1 |
From the main menu, select . |
||
Step 2 |
From the topology map, click . |
||
Step 3 |
Click the Flex Algo tab. |
||
Step 4 |
From the drop-down list, select up to two Flexible Algorithm IDs. |
||
Step 5 |
View the Flexible Algorithm Types and confirm that the selection is correct. Also, note the color assignments for each Flexible Algorithm. |
||
Step 6 |
(Optional) Check the Show selected Flex Algo topology only check box to isolate the Flexible Algorithms on the topology map. When this option is enabled, SR policy selection is disabled.
|
||
Step 7 |
Click Apply. You must click Apply for any additional changes to Flexible Algorithm selections to see the update on the topology map. Example:
|
||
Step 8 |
(Option) Click Save View to save the topology view and Flexible Algorithm selections. |