The documentation set for this product strives to use bias-free language. For the purposes of this documentation set, bias-free is defined as language that does not imply discrimination based on age, disability, gender, racial identity, ethnic identity, sexual orientation, socioeconomic status, and intersectionality. Exceptions may be present in the documentation due to language that is hardcoded in the user interfaces of the product software, language used based on RFP documentation, or language that is used by a referenced third-party product. Learn more about how Cisco is using Inclusive Language.
This Cisco Service Control for Managing Remote Cable MSO Links Solution Guide describes the use of a Cisco Service Control solution in a cable environment to optimize traffic on remote links. It describes the setup of a solution that uses the Virtual Link Manager (VLM) to enable traffic optimization of remote links, and the monitoring of that solution after deployment.
This guide assumes a basic familiarity with the concept of the Cisco Service Control solution, the Cisco Service Control Engine (Cisco SCE) platforms, and related components.
The following Document Revision History table records the changes made to this document.
|
Release and Date |
|
---|---|---|
OL-26805-02 |
Release 3.8.5 |
Updated "Configuring Virtual Link Global Controllers" section |
OL-26805-02 |
Release 3.8.5 |
Release 3.8.5 updates: •Added the following section to the "DOCSIS 3.0 Support" chapter: –"Prioritizing Subscriber Association to Bonding Groups" section •Added the following sections to the "Learning Interface Topology and Association" chapter: –"Learning Cable Interfaces Associated Directly to a MAC Domain" section –"Auto Convergence of Subscriber-GIADDR Association from the CMTS" section –"Refreshing Vlinks on Receiving CPE Messages" section –"Refreshing VLinks Periodically on Polling CMTS" section –"Refreshing Subscribers with Default VLink IDs on Learning New Interfaces" section –"VLink Association of Subscribers Introduced Through the DHCP Lease Query LEG" section –"Ignoring IP Addresses Updated Through the IPDR LEG" section •Updated the "VLM Device Learning—Limitations" section. •Added the snmp_port parameter to the [Device.<device name>] section in the "Configuring the Virtual Links Manager" section. |
•Added the following parameters to the [General] section in the "Configuring the Virtual Links Manager" section: –ignore_duplicate_ip –import_subs_into_db_on_device_add –time_interval_for_periodic_snmp_bg_query –vlink_mode_for_periodic_snmp_bg_query –subscriber_mode_for_periodic_snmp_bg_query •Added the following commands to the "Monitoring Using the p3vlink Utility" section: –--import-subs-into-db -d <device name> –--import-subs-into-db -d <device name> -o <file name> –--snmp-bg-query -d <device-name> -m <mode> •Updated the following option in the "Monitoring Using the p3vlink Utility" section: –--file-name |
||
OL-26805-01 |
Release 3.8.x |
First version of this document (new for the Release 3.8.x train). |
This guide contains the following sections.
This document uses the following conventions.
Note Means reader take note.
Tip Means the following information will help you solve a problem.
Timesaver Means the described action saves time. You can save time by performing the action described in the paragraph.
Warning Means reader be warned. In this situation, you might perform an action that could result in bodily injury. |
For information on obtaining documentation, submitting a service request, and gathering additional information, see the monthly What's New in Cisco Product Documentation, which also lists all new and revised Cisco technical documentation, at:
http://www.cisco.com/en/US/docs/general/whatsnew/whatsnew.html
Subscribe to What's New in Cisco Product Documentation as a Really Simple Syndication (RSS) feed and set content to be delivered directly to your desktop using a reader application. The RSS feeds are a free service and Cisco currently supports RSS version 2.0.