System Requirements
These sections describe the system requirements for Cisco Remote PHY Shelf 7200 Software 1.2 and its maintenance releases:
Memory Requirements
Note |
Memory is not configurable for the Cisco Remote PHY Shelf 7200 Software 1.2. |
Feature Set |
Cisco RPHY Processor |
Software Image |
Fixed Memory |
Runs From |
---|---|---|---|---|
FCC |
LS1043A |
HA-SHELF-V1-2.itb |
2GB |
Bootflash: |
RPD LC |
LS1088 |
HA-SHELF-V1-2.itb |
8GB |
Bootflash: |
Hardware Supported
For information about the supported hardware on Cisco Remote PHY Shelf 7200 Software 1.2 and its maintenance releases, see:
http://www.cisco.com/c/en/us/td/docs/cable/cbr/installation/guide/b_cbr_how_and_what_to_order.html.
Determining the Software Version
To determine the version of the Cisco Remote PHY Shelf 7200 Software 1.2 running on your Cisco Remote PHY Shelf 7200 device from FCC, LC, eRPD, and CMTS, log in and enter the show version EXEC command:
FCC#show ver
Cisco HA-Shelf Software, version v1.2, build by HA-Shelf-release, on 2019-05-29 00:08:18
Branch information:
FCC branch: (detached from HA-SHELF_V1_2_THROTTLE_190528_184027)
OpenRPD branch: (detached from HA-SHELF_V1_2_THROTTLE_190528_184027)
Slot-1#show ver
Cisco HA-Shelf Software, version v1.2, build by HA-Shelf-release, on 2019-05-29 00:08:18
Branch information:
Linecard branch: (detached from HA-SHELF_V1_2_THROTTLE_190528_184027)
OpenRPD branch: (detached from HA-SHELF_V1_2_THROTTLE_190528_184027)
eRPD-3/0#show ver
Cisco HA-Shelf Software, version v1.2, build by HA-Shelf-release, on 2019-05-29 00:08:18
Branch information:
Linecard branch: (detached from HA-SHELF_V1_2_THROTTLE_190528_184027)
OpenRPD branch: (detached from HA-SHELF_V1_2_THROTTLE_190528_184027)
GMM#show cable rpd 7abd.44a1.0085 sw-version
RPD ID SwVersion
7abd.44a1.0085 v1.2