System Requirements
These sections describe the system requirements for Cisco IOS XE Gibraltar 16.10.x:
Memory Requirements
The following table displays the memory recommendations for the Cisco cBR Series Converged Broadband Routers with Cisco IOS XE Gibraltar 16.10.1g feature sets.
Feature Set |
Cisco cBR Route Processor |
Software Image |
Recommended Flash Memory |
Recommended DRAM Memory |
Runs From |
---|---|---|---|---|---|
CISCO IOS-XE universalk9 |
Cisco cBR8 (CBR) Processor |
cbrsup-universalk9.16.10.01g.SPA.bin |
8G |
48G |
Bootflash: |
CISCO IOS-XE CLC K9 |
Cisco cBR8 (CYLONS) Processor |
cbrsup-universalk9.16.10.01g.SPA.bin |
8G |
16G |
Supervisor |
The following table displays the memory recommendations for the Cisco cBR Series Converged Broadband Routers with Cisco IOS XE Gibraltar 16.10.1f feature sets.
Feature Set |
Cisco cBR Route Processor |
Software Image |
Recommended Flash Memory |
Recommended DRAM Memory |
Runs From |
---|---|---|---|---|---|
CISCO IOS-XE universalk9 |
Cisco cBR8 (CBR) Processor |
cbrsup-universalk9.16.10.01f.SPA.bin |
8G |
48G |
Bootflash: |
CISCO IOS-XE CLC K9 |
Cisco cBR8 (CYLONS) Processor |
cbrsup-universalk9.16.10.01f.SPA.bin |
8G |
16G |
Supervisor |
The following table displays the memory recommendations for the Cisco cBR Series Converged Broadband Routers with Cisco IOS XE Gibraltar 16.10.1d feature sets.
Feature Set |
Cisco cBR Route Processor |
Software Image |
Recommended Flash Memory |
Recommended DRAM Memory |
Runs From |
---|---|---|---|---|---|
CISCO IOS-XE universalk9 |
Cisco cBR8 (CBR) Processor |
cbrsup-universalk9.16.10.01d.SPA.bin |
8G |
48G |
Bootflash: |
CISCO IOS-XE CLC K9 |
Cisco cBR8 (CYLONS) Processor |
cbrsup-universalk9.16.10.01d.SPA.bin |
8G |
16G |
Supervisor |
The following table displays the memory recommendations for the Cisco cBR Series Converged Broadband Routers with Cisco IOS XE Gibraltar 16.10.1c feature sets.
Feature Set |
Cisco cBR Route Processor |
Software Image |
Recommended Flash Memory |
Recommended DRAM Memory |
Runs From |
---|---|---|---|---|---|
CISCO IOS-XE universalk9 |
Cisco cBR8 (CBR) Processor |
cbrsup-universalk9.16.10.01c.SPA.bin |
8G |
48G |
Bootflash: |
CISCO IOS-XE CLC K9 |
Cisco cBR8 (CYLONS) Processor |
cbrsup-universalk9.16.10.01c.SPA.bin |
8G |
16G |
Supervisor |
Hardware Supported
For detailed information about the hardware supported in Cisco IOS XE Release 16.10.x and its maintenance releases, see:
http://www.cisco.com/c/en/us/td/docs/cable/cbr/installation/guide/b_cbr_how_and_what_to_order.html.
Note |
The Cisco cBR chassis must house line cards with either Downstream DOCSIS 3.0 PHY modules or Downstream DOCSIS 3.1 PHY modules. Mixed configuration is not supported. |
Determining the Software Version for Cisco IOS XE Gibraltar 16.10.1g
To determine the version of the Cisco IOS XE software running on your Cisco cBR Series Converged Broadband Routers, , log in and enter the show version EXEC command:
Router#show version
Load for five secs: 34%/3%; one minute: 83%; five minutes: 82%
Time source is NTP, 19:14:36.345 PDT Wed Aug 14 2019
Cisco IOS XE Software, Version 16.10.01g
Cisco IOS Software [Gibraltar], cBR Software (X86_64_LINUX_IOSD-UNIVERSALK9-M), Version 16.10.1g, RELEASE SOFTWARE (fc2)
Technical Support: http://www.cisco.com/techsupport
Copyright (c) 1986-2019 by Cisco Systems, Inc.
Compiled Tue 13-Aug-19 15:23 by mcpre
Cisco IOS-XE software, Copyright (c) 2005-2019 by cisco Systems, Inc.
All rights reserved. Certain components of Cisco IOS-XE software are
licensed under the GNU General Public License ("GPL") Version 2.0. The
software code licensed under GPL Version 2.0 is free software that comes
with ABSOLUTELY NO WARRANTY. You can redistribute and/or modify such
GPL code under the terms of GPL Version 2.0. For more details, see the
documentation or "License Notice" file accompanying the IOS-XE software,
or the applicable URL provided on the flyer accompanying the IOS-XE
software.
ROM: IOS-XE ROMMON
guam uptime is 13 minutes
Uptime for this control processor is 19 minutes
System returned to ROM by reload at 21:41:37 PDT Tue Aug 13 2019
System restarted at 19:01:06 PDT Wed Aug 14 2019
System image file is "harddisk:cbrsup-universalk9.16.10.01g.SPA.bin"
Last reload reason: Reload Command
This product contains cryptographic features and is subject to United
States and local country laws governing import, export, transfer and
use. Delivery of Cisco cryptographic products does not imply
third-party authority to import, export, distribute or use encryption.
Importers, exporters, distributors and users are responsible for
compliance with U.S. and local country laws. By using this product you
agree to comply with applicable laws and regulations. If you are unable
to comply with U.S. and local laws, return this product immediately.
A summary of U.S. laws governing Cisco cryptographic products may be found at:
http://www.cisco.com/wwl/export/crypto/tool/stqrg.html
If you require further assistance please contact us by sending email to
export@cisco.com.
Smart Licensing Status: UNREGISTERED/EVAL MODE
Cisco cBR-8 (CBR) processor (revision CBRVE) with 13312575K/6147K bytes of memory.
Processor board ID FXS1849Q1FE
16 Ten Gigabit Ethernet interfaces
4 Hundred Gigabit Ethernet interfaces
32768K bytes of non-volatile configuration memory.
50331648K bytes of physical memory.
7649279K bytes of eUSB flash at bootflash:.
234365527K bytes of SATA hard disk at harddisk:.
60718080K bytes of USB flash at usb1:.
0K bytes of WebUI ODM Files at webui:.
Configuration register is 0x2
Determining the Software Version for Cisco IOS XE Gibraltar 16.10.1f
To determine the version of the Cisco IOS XE software running on your Cisco cBR Series Converged Broadband Routers, , log in and enter the show version EXEC command:
Router#show version
Load for five secs: 21%/0%; one minute: 17%; five minutes: 18%
Time source is NTP, 12:46:14.081 PDT Fri May 31 2019
Cisco IOS XE Software, Version 16.10.01f
Cisco IOS Software [Gibraltar], cBR Software (X86_64_LINUX_IOSD-UNIVERSALK9-M), Version 16.10.1f, RELEASE SOFTWARE (fc2)
Technical Support: http://www.cisco.com/techsupport
Copyright (c) 1986-2019 by Cisco Systems, Inc.
Compiled Thu 30-May-19 13:24 by mcpre
Cisco IOS-XE software, Copyright (c) 2005-2019 by cisco Systems, Inc.
All rights reserved. Certain components of Cisco IOS-XE software are
licensed under the GNU General Public License ("GPL") Version 2.0. The
software code licensed under GPL Version 2.0 is free software that comes
with ABSOLUTELY NO WARRANTY. You can redistribute and/or modify such
GPL code under the terms of GPL Version 2.0. For more details, see the
documentation or "License Notice" file accompanying the IOS-XE software,
or the applicable URL provided on the flyer accompanying the IOS-XE
software.
ROM: IOS-XE ROMMON
guam uptime is 15 hours, 12 minutes
Uptime for this control processor is 15 hours, 15 minutes
System returned to ROM by SSO Switchover at 21:27:24 PDT Thu May 30 2019
System restarted at 21:37:19 PDT Thu May 30 2019
System image file is "harddisk:cbrsup-universalk9.16.10.01f.SPA.bin"
Last reload reason: Reload Command
This product contains cryptographic features and is subject to United
States and local country laws governing import, export, transfer and
use. Delivery of Cisco cryptographic products does not imply
third-party authority to import, export, distribute or use encryption.
Importers, exporters, distributors and users are responsible for
compliance with U.S. and local country laws. By using this product you
agree to comply with applicable laws and regulations. If you are unable
to comply with U.S. and local laws, return this product immediately.
A summary of U.S. laws governing Cisco cryptographic products may be found at:
http://www.cisco.com/wwl/export/crypto/tool/stqrg.html
If you require further assistance please contact us by sending email to
export@cisco.com.
Smart Licensing Status: UNREGISTERED - REGISTRATION FAILED/EVAL MODE
Cisco cBR-8 (CBR) processor (revision CBRVE) with 12336107K/6147K bytes of memory.
Processor board ID FXS1849Q1FE
16 Ten Gigabit Ethernet interfaces
4 Hundred Gigabit Ethernet interfaces
32768K bytes of non-volatile configuration memory.
50331648K bytes of physical memory.
7739391K bytes of eUSB flash at bootflash:.
117155287K bytes of SATA hard disk at harddisk:.
3911744K bytes of USB flash at usb0:.
0K bytes of WebUI ODM Files at webui:.
Configuration register is 0x2102
Determining the Software Version for Cisco IOS XE Gibraltar 16.10.1d
To determine the version of the Cisco IOS XE software running on your Cisco cBR Series Converged Broadband Routers, , log in and enter the show version EXEC command:
Router#show version
Cisco IOS XE Software, Version 16.10.01d
Cisco IOS Software [Gibraltar], cBR Software (X86_64_LINUX_IOSD-UNIVERSALK9-M), Version 16.10.1d, RELEASE SOFTWARE (fc1)
Technical Support: http://www.cisco.com/techsupport
Copyright (c) 1986-2019 by Cisco Systems, Inc.
Compiled Tue 26-Mar-19 22:26 by mcpre
Cisco IOS-XE software, Copyright (c) 2005-2019 by cisco Systems, Inc.
All rights reserved. Certain components of Cisco IOS-XE software are
licensed under the GNU General Public License ("GPL") Version 2.0. The
software code licensed under GPL Version 2.0 is free software that comes
with ABSOLUTELY NO WARRANTY. You can redistribute and/or modify such
GPL code under the terms of GPL Version 2.0. For more details, see the
documentation or "License Notice" file accompanying the IOS-XE software,
or the applicable URL provided on the flyer accompanying the IOS-XE
software.
ROM: IOS-XE ROMMON
BXB-TB28 uptime is 18 hours, 53 minutes
Uptime for this control processor is 18 hours, 58 minutes
System returned to ROM by reload at 13:51:35 EDT Wed Mar 27 2019
System restarted at 16:49:04 EDT Wed Mar 27 2019
System image file is "harddisk:cbrsup-universalk9.16.10.01d.SPA.bin"
Last reload reason: BootRomUpgrade
This product contains cryptographic features and is subject to United
States and local country laws governing import, export, transfer and
use. Delivery of Cisco cryptographic products does not imply
third-party authority to import, export, distribute or use encryption.
Importers, exporters, distributors and users are responsible for
compliance with U.S. and local country laws. By using this product you
agree to comply with applicable laws and regulations. If you are unable
to comply with U.S. and local laws, return this product immediately.
A summary of U.S. laws governing Cisco cryptographic products may be found at:
http://www.cisco.com/wwl/export/crypto/tool/stqrg.html
If you require further assistance please contact us by sending email to
export@cisco.com.
Smart Licensing Status: UNREGISTERED/EVAL MODE
Cisco cBR-8 (CBR) processor (revision CBR) with 4523766K/6147K bytes of memory.
Processor board ID FXS2038Q3GC
16 Gigabit Ethernet interfaces
32768K bytes of non-volatile configuration memory.
50331648K bytes of physical memory.
7743487K bytes of eUSB flash at bootflash:.
97620247K bytes of SATA hard disk at harddisk:.
0K bytes of WebUI ODM Files at webui:.
Configuration register is 0x2102
Determining the Software Version for Cisco IOS XE Gibraltar 16.10.1c
To determine the version of the Cisco IOS XE software running on your Cisco cBR Series Converged Broadband Routers, , log in and enter the show version EXEC command:
Router#show version
Load for five secs: 6%/0%; one minute: 7%; five minutes: 7%
Time source is NTP, 18:19:34.308 CST Mon Jan 28 2019
Cisco IOS XE Software, Version 16.10.01c
Cisco IOS Software [Gibraltar], cBR Software (X86_64_LINUX_IOSD-UNIVERSALK9-M), Version 16.10.1c, RELEASE SOFTWARE (fc1)
Technical Support: http://www.cisco.com/techsupport
Copyright (c) 1986-2019 by Cisco Systems, Inc.
Compiled Fri 25-Jan-19 03:21 by mcpre
Cisco IOS-XE software, Copyright (c) 2005-2019 by cisco Systems, Inc.
All rights reserved. Certain components of Cisco IOS-XE software are
licensed under the GNU General Public License ("GPL") Version 2.0. The
software code licensed under GPL Version 2.0 is free software that comes
with ABSOLUTELY NO WARRANTY. You can redistribute and/or modify such
GPL code under the terms of GPL Version 2.0. For more details, see the
documentation or "License Notice" file accompanying the IOS-XE software,
or the applicable URL provided on the flyer accompanying the IOS-XE
software.
ROM: IOS-XE ROMMON
Router uptime is 2 days, 3 hours, 6 minutes
Uptime for this control processor is 2 days, 1 hour, 27 minutes
System returned to ROM by SSO Switchover at 16:48:38 CST Sat Jan 26 2019
System restarted at 16:56:16 CST Sat Jan 26 2019
System image file is "harddisk:cbrsup-universalk9.16.10.01c.SPA.bin"
Last reload reason: 4
This product contains cryptographic features and is subject to United
States and local country laws governing import, export, transfer and
use. Delivery of Cisco cryptographic products does not imply
third-party authority to import, export, distribute or use encryption.
Importers, exporters, distributors and users are responsible for
compliance with U.S. and local country laws. By using this product you
agree to comply with applicable laws and regulations. If you are unable
to comply with U.S. and local laws, return this product immediately.
A summary of U.S. laws governing Cisco cryptographic products may be found at:
http://www.cisco.com/wwl/export/crypto/tool/stqrg.html
If you require further assistance please contact us by sending email to
export@cisco.com.
Smart Licensing Status: REGISTERED/AUTHORIZED
Cisco cBR-8 (CBR) processor (revision CBR) with 5500542K/6147K bytes of memory.
Processor board ID FXS175106MQ
24 Gigabit Ethernet interfaces
32768K bytes of non-volatile configuration memory.
50331648K bytes of physical memory.
7743487K bytes of eUSB flash at bootflash:.
97620247K bytes of SATA hard disk at harddisk:.
0K bytes of WebUI ODM Files at webui:.
Configuration register is 0x1822
Microcode Software
This section describes microcode software that is supported for the Cisco cBR Series Converged Broadband Routers.
For more information, see Upgrading the Cisco cBR Series Converged Broadband Routers for Cisco IOS XE Gibraltar 16.10.x.
Feature Support
Cisco IOS XE software is packaged in feature sets that consist of software images that support specific platforms. The feature sets available for a specific platform depend on which Cisco IOS XE software images are included in a release. Each feature set contains a specific set of Cisco IOS XE features.
Caution |
Cisco IOS XE images with strong encryption (including, but not limited to 168-bit [3DES] data encryption feature sets) are subject to U.S. government export controls and have limited distribution. Strong encryption images to be installed outside the United States are likely to require an export license. Customer orders may be denied or subject to delay because of U.S. government regulations. When applicable, the purchaser or user must obtain local import and use authorizations for all encryption strengths. Please contact your sales representative or distributor for more information, or send an e-mail to export@cisco.com. |
Cisco cBR Series Converged Broadband Routers and Cisco Remote PHY Devices Version Compatibility
The versions of Cisco cBR Series Converged Broadband Routers (Cisco cBR-8) and Cisco Remote PHY Devices (RPD) must be compatible. If the versions are not compatible, the RPD remains in the init(gcp) state. The following list provides information on the compatible cBR-8 and RPD versions:
-
Cisco IOS XE Everest 16.6.x works with RPD 2.x
-
Cisco IOS XE Fuji 16.7.x works with RPD 3.x
-
Cisco IOS XE Fuji 16.8.x works with RPD 4.x
-
Cisco IOS XE Fuji 16.9.x works with RPD 5.x
-
Cisco IOS XE Gibraltar 16.10.1c works with RPD 6.1, 6.2 and 6.3
-
Cisco IOS XE Gibraltar 16.10.1d works with RPD 6.4, 6.5 and 6.7
-
Cisco IOS XE Gibraltar 16.10.1f is not recommended for RPD deployment
-
Cisco IOS XE Gibraltar 16.10.1g works with RPD 6.7.1, 7.1 and 7.2