Advanced Video MPEG Features

Cisco cBR Series Converged Broadband Router supports the following video features.

Information about Advanced Video MPEG Features

Reserved Output PID Range

The reserved output PID range allows the user to specify a range of PIDs that will not be used as output for remapped sessions. A range of up to 4000 PIDs from 1-8190 can be reserved.

One continuous reserved PID range is supported for each chassis. Note that the protection is only good for future output remapped PIDs, so the reserved PID range is expected to be configured before any remapped sessions are created. Remapped PIDs within the reserved range that already exists will not be reallocated.

How to Configure Advanced Video MPEG Features

Configuring Reserved Output PID Range

To configure reserved output range, follow the steps below: 

enable
configure terminal
cable video
reserve-pid-range start-pid-end-pid

Verifying Reserved Output PID Range Configuration

To verify the reserved output PID range configuration, use the show cable video logical-edge-device id id reserve-pid-range command as shown in the example below. 

Router# show cable video logical-edge-device id 1 reserve-pid-range
Logical Edge Device: led1
Id: 1
Reserve PID Range: 1-4000

Configuration Examples for Advanced Video MPEG Features

This section provides configuration examples for the advanced video MPEG features:

Example: Configuring Reserved Output PID Range

The following example shows how to configure reserved output PID range. 

enable
configure terminal
cable video
reserve-pid-range 4000-4100

Feature Information for Advanced Video MPEG Features

Use Cisco Feature Navigator to find information about platform support and software image support. Cisco Feature Navigator enables you to determine which software images support a specific software release, feature set, or platform. To access Cisco Feature Navigator, go to http:/​/​www.cisco.com/​go/​cfn. An account on Cisco.com is not required.


Note

The table below lists only the software release that introduced support for a given feature in a given software release train. Unless noted otherwise, subsequent releases of that software release train also support that feature.

Table 1 Feature Information for Advanced Video MPEG Features

Feature Name

Releases

Feature Information

Advanced Video MPEG Features

Cisco IOS XE Everest 16.6.1

This feature was integrated on the Cisco cBR Series Converged Broadband Routers.