Name
|
Name of the service definition
|
NA
|
Description
|
A brief description on service definition
|
No
|
Event Profile
|
RPD Event Profile Set
|
No
|
R-DTI Profile
|
Remote DOCSIS Timing Interface (R-DTI) Set
|
No
|
Pilot Tone Profile
|
Pilot tone profile.
|
Yes
|
Cable DSG TGs
|
DSG tag IDs.
|
Yes
|
First Logical DS/US Pairing
|
Service Group Profile
|
Pre-existing Cable Service Profile-Group on the Cisco cBR-8 router.
|
Yes
|
Downstream Controller Profile
|
Primary downstream CCAP controller profile.
|
Yes
|
RF Power Profiles
|
Apply one or more RF Power Adjust Profile(s) to modify
the RPD’s Downstream RF channel power output.
|
No
|
Upstream Controller Profile
|
Primary upstream CCAP controller profile.
|
Yes
|
Second Logical DS/US Pairing
|
Enable
|
Select the check box to enable the second logical DS/US pairing.
The Cisco Smart PHY application supports different controller profiles and fiber node configurations for second logical pairing
in 2x2 RPD.
|
Yes
|
Service Group Profile
|
Pre-existing Cable Service Profile-Group on the Cisco cBR-8 router.
|
Yes
|
Downstream Controller Profile
|
Secondary downstream CCAP controller profile.
|
Yes
|
RF Power Profiles
|
Apply one or more RF Power Adjust Profile(s) to modify
the RPD’s Downstream RF channel power output.
|
No
|
Upstream Controller Profile
|
Secondary upstream CCAP controller profile.
|
Yes
|
Enable MAC Domain Splitting
|
Select the check box to split a MAC domain between two fiber-nodes that share the same downstream controller.
|
Yes
|
Network Delay
|
Network delay has two options:
-
DLM—System periodically measures the network latency between the CCAP core and the RPD, and dynamically updates the cable map
advance. Range is interval in seconds. The valid range for measuring DLM is 1–420 seconds.
Measure only—Choose to measure network latency between the CCAP core and the RPD. This option is not for updating the cable map advance.
You can select this option for a service definition in use, but cannot deselect it.
-
Static—The cable map advance is adjusted by a fixed amount. The valid range is 30–100,000 microseconds.
This range is the Converged Interconnect Network (CIN) delay in microseconds. CIN is the network between the CCAP core and
RPD.
You can change the network-delay range for a service definition in use.
For more details, see DEPI Latency Measurement in the Service Template section in this document.
|
No
|
Out Of Band
|
Downstream VOM ID
|
OOB 55–1 Downstream Virtual out-of-band Modulator (VOM) identification (ID).
|
No
|
Downstream VOM Profile
|
OOB 55–1 Downstream VOM profile.
|
No
|
Upstream VARPD ID
|
OOB 55–1 Upstream Virtual Advanced Return Path Demodulator (VARPD) ID.
|
No
|
Upstream VARPD Profile
|
OOB 55–1 Upstream VARPD profile for first logical downstream/upstream (DS/US) pairing.
The upstream VARPD profile (upstreamVarpdProfile) and the second upstream VARPD profile (secondUpstreamVarpdProfile) can have
the same value. For more details, see Common OOB 55-1 US Profile for Cisco RPD 1x2/2x2.
|
No
|
Second Upstream VARPD Profile
|
OOB 55–1 Upstream VARPD profile for second logical downstream/upstream (DS/US) pairing.
The upstream VARPD profile (upstreamVarpdProfile) and the second upstream VARPD profile (secondUpstreamVarpdProfile) can have
the same value. For more details, see Common OOB 55-1 US Profile for Cisco RPD 1x2/2x2.
|
No
|
NDF/NDR
|
Pseudowire Name
|
NDF
Narrowband digital forward pseudowire name.
Supports up to three pseudowire names and profile ID sets per DS port.
NDR
Narrowband digital return pseudowire name. Supports up to three pseudowire names and profile ID sets per US port.
|
No
|
Profile ID
|
|
No
|
NDF: Port
|
Downstream port, Port 0, or Port 1 to apply NDF pseudowire name and profile ID for a 2x2 RPD.
|
No
|
NDR: Port
|
Upstream port, Port 0, or Port 1 to apply NDR pseudowire name and profile ID for a 2x2 RPD.
|
No
|
Load Balance
|
Paste the load balance XML text in the text field. Use the ntool to convert the XML configuration from the Cisco cBR-8 router
to the required XML format.
|
No
|