The documentation set for this product strives to use bias-free language. For the purposes of this documentation set, bias-free is defined as language that does not imply discrimination based on age, disability, gender, racial identity, ethnic identity, sexual orientation, socioeconomic status, and intersectionality. Exceptions may be present in the documentation due to language that is hardcoded in the user interfaces of the product software, language used based on RFP documentation, or language that is used by a referenced third-party product. Learn more about how Cisco is using Inclusive Language.
This document describes the tasks involved in setting up and maintaining the Cisco StadiumVision Director and Cisco StadiumVision Director Remote servers in Release 3.1.
The content is intended for Cisco StadiumVision system administrators and technical field engineers who are responsible for designing and deploying Cisco StadiumVision solutions. It is expected that readers of this document are familiar with basic IP networking and Linux.
Table 1 lists the technical changes made to this document since it was first published.
|
|
---|---|
October 28, 2013 |
Updated the "Cisco StadiumVision Director Server Text Utility Interface" to document changes in the Cisco StadiumVision Director TUI that allow configuration of the log file retention policy in Cisco StadiumVision Director Release 3.1.0-797. The TUI map illustration has also been modified. |
June 20, 2013 |
Updated the book with the following changes: •Clarified the hard drive requirements for the Platform 3 server in the "Cisco StadiumVision Director Platform 3 Server" section. •Updated the "Multicast Optimization for Remote Venues" section to identify the three global multicast flows from the Cisco Stadiumvision Director server. |
June 10, 2013 |
Updated the book with the following changes: •The following updates were made in the "Configuring the Cisco StadiumVision Director Server System Settings" and "Configuring Cisco StadiumVision Director Remote Servers" modules: –Added a note to recommend that periods not be used in the DNS hostname configuration. –Updated information about restart of the Network Service before generation of the SSL certificate. –Added task for configuration of the /etc/hosts file that was missing from the "Configuring Cisco StadiumVision Director Remote Servers" module. –Added step for restart of Cisco StadiumVision Director Remote services after configuring the IP address and setting the JMX password in the "Configuring Cisco StadiumVision Director Remote Servers" module. •The following updates were made in the "Configuring Cisco StadiumVision Director for Multiple Venue Support" module: –Clarified multicast optimization description. –Added registry configuration to override default multicast optimization addressing. –Added information about venue removal. –Added caution about not disabling multiple venue support after enabling it. –Added information about how to migrate devices from a single venue to multi-venue system using BAT. –Added information about script best practices and staging behavior. |
March 19, 2013 |
Updated for Cisco StadiumVision Director Release 3.1.0-632, including the following changes: •Addition of "Configuring the Cisco StadiumVision Director Server System Settings" for intial configuration of new Cisco StadiumVision Director server. •Updated the "Backing Up and Restoring Cisco StadiumVision Director Servers" module to document new TUI method for changing the backup/restore file retention policy on the server. •Updated the "Cisco StadiumVision Director Server Text Utility Interface" module for changes to the Cisco StadiumVision Director TUI and enhancements to the NTP server configuration. |
March 7, 2013 |
First release of this document for Cisco StadiumVision Director Release 3.1.0-510. |
|
|
---|---|
Describes the network architectures supported in Cisco StadiumVision Director Release 3.1, including the new centralized Cisco Stadiumvision Director network architecture, and the new server platforms used to implement the solution. |
|
"Configuring the Cisco StadiumVision Director Server System Settings" |
Describes how to configure the initial setup of the Cisco StadiumVision Director server. |
Describes how to configure the initial setup of Cisco StadiumVision Director Remote server network connectivity and communication with the Cisco StadiumVision Director server. |
|
"Configuring Cisco StadiumVision Director for Multiple Venue Support" |
Describes how to enable and manage multiple venue support on Cisco StadiumVision Director Remote servers. |
"System Accounts on the Cisco StadiumVision Director Servers" |
Describes the default system accounts implemented by Cisco StadiumVision Director for access and control of certain server functions. Aside from the admin account, these system accounts are generally separate from the user accounts that secure access to the Cisco StadiumVision Director feature configuration and operation. |
Describes the Role-Based Access Control (RBAC) function in Cisco StadiumVision Director to control user access to only the portions of the system for which they are trained and authorized to use. |
|
"Backing Up and Restoring Cisco StadiumVision Director Servers" |
Describes how to setup and schedule backups between a primary and secondary server, and restore data between them. |
"Configuring Failover Between Redundant Cisco StadiumVision Director Servers" |
Describes the warm standby environment between two servers that run the Cisco StadiumVision Director software, where one of the servers operates as the primary active server, and the other server operates as a secondary backup server. This module explains how you can configure the backup server to become the active server if a failure occurs, and also how to restore the primary server. |
"Cisco StadiumVision Director Server Text Utility Interface" |
Provides an overview of the Text Utility Interface (TUI) for both the Cisco Stadiumvision Director and Cisco StadiumVision Director Remote servers. The TUI provides a console-based interface for use by system installers, administrators, and troubleshooting personnel to perform routine system tasks such as modifying system configurations, changing passwords, and checking system logs. |
•Release Notes for Cisco StadiumVision Director Release 3.1
•Cisco StadiumVision Director Software Installation and Upgrade Guide, Release 3.1
•For the listing page of all Cisco StadiumVision documentation, go to:
http://www.cisco.com/en/US/products/ps11274/tsd_products_support_series_home.html
For information on obtaining documentation, submitting a service request, and gathering additional information, see the monthly What's New in Cisco Product Documentation, which also lists all new and revised Cisco technical documentation, at:
http://www.cisco.com/en/US/docs/general/whatsnew/whatsnew.html
Subscribe to the What's New in Cisco Product Documentation as an RSS feed and set content to be delivered directly to your desktop using a reader application. The RSS feeds are a free service. Cisco currently supports RSS Version 2.0.