PDF(122.9 KB) View with Adobe Reader on a variety of devices
ePub(213.2 KB) View in various apps on iPhone, iPad, Android, Sony Reader, or Windows Phone
Mobi (Kindle)(250.7 KB) View on Kindle device or Kindle app on multiple devices
Updated:December 12, 2018
The documentation set for this product strives to use bias-free language. For the purposes of this documentation set, bias-free is defined as language that does not imply discrimination based on age, disability, gender, racial identity, ethnic identity, sexual orientation, socioeconomic status, and intersectionality. Exceptions may be present in the documentation due to language that is hardcoded in the user interfaces of the product software, language used based on RFP documentation, or language that is used by a referenced third-party product. Learn more about how Cisco is using Inclusive Language.
Capture Network Diagnostic Information using the FindIT Network Probe
The Cisco FindIT Network Management provides tools that help you easily monitor, manage, and configure your Cisco 100 to 500 Series network devices such as switches, routers, and wireless access points (WAPs) using your web browser. It also notifies you about device and Cisco Support notifications such as the availability of new firmware, device status, network settings updates, and any connected devices that are no longer under warranty or covered by a support contract.
The FindIT Network Management is a distributed application which is comprised of two separate components or interfaces: one or more Probes referred to as FindIT Network Probe and a single Manager called FindIT Network Manager.
The FindIT Network Probe is equipped with a Troubleshooting page that provide a tool to help diagnose problems in the network. The Network Show Tech allows you to easily capture diagnostic information for your network and send it to a support engineer for analysis, or save to your local computer for your personal analyzation.
This article provides instructions on how to capture diagnostic information using the FindIT Network Probe.
Capture Network Diagnostic Information
Gather Diagnostic Data
Step 1. Log in to the Administration GUI of the FindIT Network Probe using your username and password. The default username and password is cisco/cisco.
Note: If you have already changed the password or created a new account, enter your new credentials instead.
Step 2. Choose Troubleshooting > Network Show Tech.
Step 3. (Optional) Check the Remove password and certificates check box to exclude passwords and certificates from diagnostic information. This is checked by default.
Note: Alternatively, you can uncheck this check box to include passwords and certificates to the diagnostic information that you are going to capture.
Step 4. (Optional) Check the Attach to Cisco case number check box then enter the case number in the field to attach the diagnostic information to a Cisco case number.
Note: In this example, 629632596 is used.
Step 5. (Optional) Check the Email to check box if you want the information to be sent through an email, then enter the email address or addresses where the diagnostic information will be sent. You can enter multiple email addresses separated by a comma.
Note: Make sure the email settings have been configured on the FindIT Network Probe. For instructions, click here.