Tidal Enterprise Orchestrator: Edit Content Delivered by Cisco

Introduction

The content delivered by Cisco is any process configuration delivered in a Cisco developed automation pack. By default, you will not be able to edit most of the components of that content. This document describes how to edit this delivered content.

Prerequisites

Requirements

There are no specific requirements for this document.

Components Used

The information in this document is based on Tidal Enterprise Orchestrator.

The information in this document was created from the devices in a specific lab environment. All of the devices used in this document started with a cleared (default) configuration. If your network is live, make sure that you understand the potential impact of any command.

Edit Content Delivered by Cisco

Content delivered by Cisco is locked down to editing. However, it is fully supported by Cisco Support.

Complete these steps in order to edit Cisco content:

1. Under Definitions > Process, right-click on a process you wish to change, and choose Copy.

2. Right-click in an open space and click Paste. The system will make a copy of that process.

3. The copied process can now be edited. So, while not technically editing the Cisco delivered content, you will have an exact copy of it which you can edit.

4. Disable the old or Cisco-delievered version if you do not want to duplicate work.

   Note: Once the copy is made, it becomes the custom content of the end user and is no longer fully supported by Cisco Support.

Related Information

• Technical Support & Documentation - Cisco Systems