Cannot Deploy 4.8.0. Image to VMware with ACI

Available Languages

Download Options

  • PDF     (5.4 KB)
    View with Adobe Reader on a variety of devices
  • ePub     (64.8 KB)
    View in various apps on iPhone, iPad, Android, Sony Reader, or Windows Phone
  • Mobi (Kindle)     (64.2 KB)
    View on Kindle device or Kindle app on multiple devices
Updated:August 29, 2017
Document ID:211635

Bias-Free Language

The documentation set for this product strives to use bias-free language. For the purposes of this documentation set, bias-free is defined as language that does not imply discrimination based on age, disability, gender, racial identity, ethnic identity, sexual orientation, socioeconomic status, and intersectionality. Exceptions may be present in the documentation due to language that is hardcoded in the user interfaces of the product software, language used based on RFP documentation, or language that is used by a referenced third-party product. Learn more about how Cisco is using Inclusive Language.

    Introduction

    This document describes an error received when you deploy a 4.8.0. worker image to VMware with Application Centric Infrastructure (ACI).

    Prerequisites

    Requirements

    There are no specific requirements for this document.

      

    Components Used

    The information in this document is based on Cloud Center Version 4.8.0.

    The information in this document was created from the devices in a specific lab environment. All of the devices used in this document started with a cleared (default) configuration. If your network is live, make sure that you understand the potential impact of any command.

    Problem

    When you deploy a 4.8.0. worker image in VMware with ACI, you see one of two error messages:

    ERROR policy.AciSecurityPolicyUtil [threadPoolExecutor-1]  - 
    External network parameter ECS:L3out:L3Out-EPG is of the wrong format!

    or

    ERROR policy.AciSecurityPolicyUtil [threadPoolExecutor-1]  - 
    External network parameter is of the wrong format

    Solution

    This is a known issue with the 4.8.0. worker image. It is not able to understand L3 Out with 3 values, see CORE-15315 (Status: Fixed on v. 4.8.1.) for more information.

    This issue has been solved in 4.8.0.1, upgrade the Worker image to 4.8.0.1 to resolve.

    TAC Authored

    Contributed by Cisco Engineers

    • Jesse Lafuenti
      Cisco TAC Engineer

    Was this Document Helpful?

    FeedbackFeedback

    Contact Cisco

    This Document Applies to These Products