Konfigurieren von DMVPN- und Easy VPN-Servern mit ISAKMP-Profilen

Download-Optionen

PDF (312.4 KB)
Mit Adobe Reader auf verschiedenen Geräten anzeigen
ePub (102.6 KB)
In verschiedenen Apps auf iPhone, iPad, Android, Sony Reader oder Windows Phone anzeigen
Mobi (Kindle) (116.7 KB)
Auf einem Kindle-Gerät oder einer Kindle-App auf mehreren Geräten anzeigen

Aktualisiert:6. Dezember 2006

Dokument-ID:47541

Inklusive Sprache

In dem Dokumentationssatz für dieses Produkt wird die Verwendung inklusiver Sprache angestrebt. Für die Zwecke dieses Dokumentationssatzes wird Sprache als „inklusiv“ verstanden, wenn sie keine Diskriminierung aufgrund von Alter, körperlicher und/oder geistiger Behinderung, Geschlechtszugehörigkeit und -identität, ethnischer Identität, sexueller Orientierung, sozioökonomischem Status und Intersektionalität impliziert. Dennoch können in der Dokumentation stilistische Abweichungen von diesem Bemühen auftreten, wenn Text verwendet wird, der in Benutzeroberflächen der Produktsoftware fest codiert ist, auf RFP-Dokumentation basiert oder von einem genannten Drittanbieterprodukt verwendet wird. Hier erfahren Sie mehr darüber, wie Cisco inklusive Sprache verwendet.

Informationen zu dieser Übersetzung

Cisco hat dieses Dokument maschinell übersetzen und von einem menschlichen Übersetzer editieren und korrigieren lassen, um unseren Benutzern auf der ganzen Welt Support-Inhalte in ihrer eigenen Sprache zu bieten. Bitte beachten Sie, dass selbst die beste maschinelle Übersetzung nicht so genau ist wie eine von einem professionellen Übersetzer angefertigte. Cisco Systems, Inc. übernimmt keine Haftung für die Richtigkeit dieser Übersetzungen und empfiehlt, immer das englische Originaldokument (siehe bereitgestellter Link) heranzuziehen.

Inhalt

Einleitung

Voraussetzungen

Anforderungen

Verwendete Komponenten

Konventionen

Konfigurieren

Netzwerkdiagramm

Konfigurationen

Überprüfung

Fehlerbehebung

Zugehörige Informationen

Einleitung

In diesem Dokument wird beschrieben, wie Dynamic Multipoint VPN (DMVPN) und Easy VPN mit Xauth auf demselben Router konfiguriert werden. Diese Konfiguration sorgt für die dynamische Adressierung von DMVPN-Stationen. ISAKMP-Profile (Internet Security Association and Key Management Protocol) bieten die Möglichkeit, die Authentifizierungsverfahren von dynamisch adressierten DMVPN-Stationen oder Easy VPN-Clients zu trennen.

Voraussetzungen

Anforderungen

Es gibt keine spezifischen Anforderungen für dieses Dokument.

Verwendete Komponenten

Die Informationen in diesem Dokument basierend auf folgenden Software- und Hardware-Versionen:

Cisco Router der Serien 2691 und 3725 mit Cisco IOS® Software, Versionen 12.3(3) und 12.3(3)a

Die Informationen in diesem Dokument beziehen sich auf Geräte in einer speziell eingerichteten Testumgebung. Alle Geräte, die in diesem Dokument benutzt wurden, begannen mit einer gelöschten (Nichterfüllungs) Konfiguration. Wenn Ihr Netz Live ist, überprüfen Sie, ob Sie die mögliche Auswirkung jedes möglichen Befehls verstehen.

Konventionen

Weitere Informationen zu Dokumentkonventionen finden Sie unter Cisco Technical Tips Conventions (Technische Tipps von Cisco zu Konventionen).

Konfigurieren

In diesem Abschnitt erfahren Sie, wie Sie die in diesem Dokument beschriebenen Funktionen konfigurieren können.

Hinweis: Verwenden Sie das Tool für die Suche nach Befehlen (nur für registrierte Kunden), um weitere Informationen zu den in diesem Dokument verwendeten Befehlen zu erhalten.

Netzwerkdiagramm

In diesem Dokument wird die folgende Netzwerkeinrichtung verwendet.

Konfigurationen

In diesem Dokument werden folgende Konfigurationen verwendet.

sv9-2 Hub-Konfiguration
sv9-3 Spoke-Konfiguration
sv9-4 Spoke-Konfiguration

sv9-2 Hub-Konfiguration
sv9-2#show run Building configuration... Current configuration : 2876 bytes ! version 12.3 service timestamps debug datetime msec service timestamps log datetime msec no service password-encryption ! hostname sv9-2 ! boot-start-marker boot-end-marker ! enable password cisco ! username cisco password 0 cisco aaa new-model ! ! !--- Xauth is configured for local authentication. aaa authentication login userauthen local aaa authorization network hw-client-groupname local aaa session-id common ip subnet-zero ! ! no ip domain lookup ! ip audit notify log ip audit po max-events 100 ip ssh break-string no ftp-server write-enable ! ! !--- Keyring that defines the wildcard pre-shared key. crypto keyring dmvpnspokes pre-shared-key address 0.0.0.0 0.0.0.0 key cisco123 ! !--- Create an ISAKMP policy for Phase 1 negotiations. !--- This policy is for DMVPN spokes. crypto isakmp policy 10 hash md5 authentication pre-share ! !--- Create an ISAKMP policy for Phase 1 negotiations. !--- This policy is for Easy VPN Clients. crypto isakmp policy 20 hash md5 authentication pre-share group 2 ! !--- VPN Client configuration for group "hw-client-groupname" !--- (this name is configured in the VPN Client). crypto isakmp client configuration group hw-client-groupname key hw-client-password dns 1.1.11.10 1.1.11.11 wins 1.1.11.12 1.1.11.13 domain cisco.com pool dynpool !--- Profile for VPN Client connections, matches the !--- "hw-client-group" group and defines the XAuth properties. crypto isakmp profile VPNclient match identity group hw-client-groupname client authentication list userauthen isakmp authorization list hw-client-groupname client configuration address respond !--- Profile for LAN-to-LAN connection, references !--- the wildcard pre-shared key and a wildcard !--- identity (this is what is broken in !--- Cisco bug ID CSCea77140) !--- and no XAuth. crypto isakmp profile DMVPN keyring dmvpnspokes match identity address 0.0.0.0 ! ! !--- Create the Phase 2 policy for actual data encryption. crypto ipsec transform-set strong esp-3des esp-md5-hmac mode transport ! !--- Create an IPsec profile to be applied dynamically to the !--- generic routing encapsulation (GRE) over IPsec tunnels. crypto ipsec profile cisco set security-association lifetime seconds 120 set transform-set strong set isakmp-profile DMVPN ! ! !--- This dynamic crypto map references the ISAKMP !--- Profile VPN Client above. !--- Reverse route injection is used to provide the !--- DMVPN networks access to any Easy VPN Client networks. crypto dynamic-map dynmap 10 set isakmp-profile VPNclient reverse-route set transform-set strong ! ! !--- Crypto map only references the dynamic crypto map above. crypto map dynmap 1 ipsec-isakmp dynamic dynmap ! ! ! ! ! ! ! ! ! ! no voice hpi capture buffer no voice hpi capture destination ! ! ! ! ! ! !--- Create a GRE tunnel template which is applied to !--- all the dynamically created GRE tunnels. interface Tunnel0 ip address 192.168.1.1 255.255.255.0 no ip redirects ip mtu 1440 ip nhrp authentication cisco123 ip nhrp map multicast dynamic ip nhrp network-id 1 ip nhrp holdtime 300 no ip split-horizon eigrp 90 tunnel source FastEthernet0/0 tunnel mode gre multipoint tunnel key 0 tunnel protection ipsec profile cisco ! interface FastEthernet0/0 ip address 209.168.202.225 255.255.255.0 duplex auto speed auto crypto map dynmap ! interface FastEthernet0/1 ip address 1.1.1.1 255.255.255.0 duplex auto speed auto ! interface BRI1/0 no ip address shutdown ! interface BRI1/1 no ip address shutdown ! interface BRI1/2 no ip address shutdown ! interface BRI1/3 no ip address shutdown ! !--- Enable a routing protocol to send and receive !--- dynamic updates about the private networks. router eigrp 90 redistribute static network 1.1.1.0 0.0.0.255 network 192.168.1.0 no auto-summary ! ip local pool dynpool 1.1.11.60 1.1.11.80 ip http server no ip http secure-server ip classless ! ! ! ! ! ! ! ! ! ! ! line con 0 exec-timeout 0 0 transport preferred all transport output all escape-character 27 line aux 0 transport preferred all transport output all line vty 0 4 password cisco transport preferred all transport input all transport output all ! ! end

sv9-2 Hub-Konfiguration

sv9-2#show run
Building configuration...

Current configuration : 2876 bytes
!
version 12.3
service timestamps debug datetime msec
service timestamps log datetime msec
no service password-encryption
!
hostname sv9-2
!
boot-start-marker
boot-end-marker
!
enable password cisco
!
username cisco password 0 cisco
aaa new-model
!
!

!--- Xauth is configured for local authentication.

aaa authentication login userauthen local
aaa authorization network hw-client-groupname local 
aaa session-id common
ip subnet-zero
! 
!
no ip domain lookup
!
ip audit notify log
ip audit po max-events 100
ip ssh break-string 
no ftp-server write-enable
!
! 


!--- Keyring that defines the wildcard pre-shared key.


crypto keyring dmvpnspokes 
pre-shared-key address 0.0.0.0 0.0.0.0 key cisco123
!

 


!--- Create an ISAKMP policy for Phase 1 negotiations. !--- This policy is for DMVPN spokes.

crypto isakmp policy 10
hash md5
authentication pre-share
!


!--- Create an ISAKMP policy for Phase 1 negotiations. !--- This policy is for Easy VPN Clients.


crypto isakmp policy 20
hash md5
authentication pre-share
group 2

!


!--- VPN Client configuration for group "hw-client-groupname" !--- (this name is configured in the VPN Client).


crypto isakmp client configuration group hw-client-groupname
key hw-client-password
dns 1.1.11.10 1.1.11.11
wins 1.1.11.12 1.1.11.13
domain cisco.com
pool dynpool
 


!--- Profile for VPN Client connections, matches the !--- "hw-client-group" group and defines the XAuth properties. 

crypto isakmp profile VPNclient
match identity group hw-client-groupname
client authentication list userauthen
isakmp authorization list hw-client-groupname
client configuration address respond

 

 !--- Profile for LAN-to-LAN connection, references !--- the wildcard pre-shared key and a wildcard !--- identity (this is what is broken in !--- Cisco bug ID CSCea77140) !--- and no XAuth.
 
crypto isakmp profile DMVPN
keyring dmvpnspokes
match identity address 0.0.0.0 
!
!


!--- Create the Phase 2 policy for actual data encryption.

crypto ipsec transform-set strong esp-3des esp-md5-hmac 
mode transport
!


!--- Create an IPsec profile to be applied dynamically to the !--- generic routing encapsulation (GRE) over IPsec tunnels.

crypto ipsec profile cisco
set security-association lifetime seconds 120
set transform-set strong 
set isakmp-profile DMVPN
! 
!


!--- This dynamic crypto map references the ISAKMP !--- Profile VPN Client above. !--- Reverse route injection is used to provide the !--- DMVPN networks access to any Easy VPN Client networks.

crypto dynamic-map dynmap 10
set isakmp-profile VPNclient
reverse-route
set transform-set strong
!
!


!--- Crypto map only references the dynamic crypto map above.
 
crypto map dynmap 1 ipsec-isakmp dynamic dynmap 
!
!
!
!
!
!
!
!
!
!
no voice hpi capture buffer
no voice hpi capture destination 
!
!
!
! 
!
!


!--- Create a GRE tunnel template which is applied to !--- all the dynamically created GRE tunnels.

interface Tunnel0
ip address 192.168.1.1 255.255.255.0
no ip redirects
ip mtu 1440
ip nhrp authentication cisco123
ip nhrp map multicast dynamic
ip nhrp network-id 1
ip nhrp holdtime 300
no ip split-horizon eigrp 90
tunnel source FastEthernet0/0
tunnel mode gre multipoint
tunnel key 0
tunnel protection ipsec profile cisco
!
interface FastEthernet0/0
ip address 209.168.202.225 255.255.255.0
duplex auto
speed auto
crypto map dynmap
!
interface FastEthernet0/1
ip address 1.1.1.1 255.255.255.0
duplex auto
speed auto
!
interface BRI1/0
no ip address
shutdown
!
interface BRI1/1
no ip address
shutdown
!
interface BRI1/2
no ip address
shutdown
!
interface BRI1/3
no ip address
shutdown
!


!--- Enable a routing protocol to send and receive !--- dynamic updates about the private networks.

router eigrp 90
redistribute static
network 1.1.1.0 0.0.0.255
network 192.168.1.0
no auto-summary
!
ip local pool dynpool 1.1.11.60 1.1.11.80
ip http server
no ip http secure-server
ip classless
!
!
!
!
!
!
!
!
!
!
!
line con 0
exec-timeout 0 0
transport preferred all
transport output all
escape-character 27
line aux 0
transport preferred all
transport output all
line vty 0 4
password cisco
transport preferred all
transport input all
transport output all
!
!
end

sv9-3 Spoke-Konfiguration
sv9-3#show run Building configuration... Current configuration : 2052 bytes ! version 12.3 service timestamps debug datetime msec service timestamps log datetime msec no service password-encryption ! hostname sv9-3 ! boot-start-marker boot system flash:c3725-ik9o3s-mz.123-3.bin boot-end-marker ! ! no aaa new-model ip subnet-zero ! ! no ip domain lookup ! ip audit notify log ip audit po max-events 100 ip ssh break-string no ftp-server write-enable ! ! ! !--- Create an ISAKMP policy for Phase 1 negotiations. crypto isakmp policy 10 hash md5 authentication pre-share !--- Add dynamic pre-shared keys for all remote VPN routers. crypto isakmp key cisco123 address 0.0.0.0 0.0.0.0 ! ! !--- Create the Phase 2 policy for actual data encryption. crypto ipsec transform-set strong esp-3des esp-md5-hmac mode transport ! !--- Create an IPsec profile to be applied dynamically to the !--- GRE over IPsec tunnels. crypto ipsec profile cisco set security-association lifetime seconds 120 set transform-set strong ! ! no voice hpi capture buffer no voice hpi capture destination ! ! !--- Create a GRE tunnel template which is applied to !--- all the dynamically created GRE tunnels. interface Tunnel0 ip address 192.168.1.3 255.255.255.0 no ip redirects ip mtu 1440 ip nhrp authentication cisco123 ip nhrp map multicast dynamic ip nhrp map 192.168.1.1 209.168.202.225 ip nhrp map multicast 209.168.202.225 ip nhrp network-id 1 ip nhrp holdtime 300 ip nhrp nhs 192.168.1.1 no ip split-horizon eigrp 90 tunnel source FastEthernet0/0 tunnel mode gre multipoint tunnel key 0 tunnel protection ipsec profile cisco ! interface FastEthernet0/0 ip address 209.168.202.130 255.255.255.0 duplex auto speed auto ! interface FastEthernet0/1 ip address 3.3.3.3 255.255.255.0 duplex auto speed auto ! interface BRI1/0 no ip address shutdown ! interface BRI1/1 no ip address shutdown ! interface BRI1/2 no ip address shutdown ! interface BRI1/3 no ip address shutdown ! !--- Enable a routing protocol to send and receive !--- dynamic updates about the private networks. router eigrp 90 network 3.3.3.0 0.0.0.255 network 192.168.1.0 no auto-summary ! ip http server no ip http secure-server ip classless ip route 0.0.0.0 0.0.0.0 209.168.202.225 ip route 2.2.2.0 255.255.255.0 Tunnel0 ! ! line con 0 exec-timeout 0 0 transport preferred all transport output all escape-character 27 line aux 0 transport preferred all transport output all line vty 0 4 login transport preferred all transport input all transport output all ! ! end

sv9-3 Spoke-Konfiguration

sv9-3#show run
Building configuration...

Current configuration : 2052 bytes
!
version 12.3
service timestamps debug datetime msec
service timestamps log datetime msec
no service password-encryption
!
hostname sv9-3
!
boot-start-marker
boot system flash:c3725-ik9o3s-mz.123-3.bin
boot-end-marker
!
!
no aaa new-model
ip subnet-zero
!
!
no ip domain lookup
!
ip audit notify log
ip audit po max-events 100
ip ssh break-string 
no ftp-server write-enable
!
! 
!

!--- Create an ISAKMP policy for Phase 1 negotiations.

crypto isakmp policy 10
hash md5
authentication pre-share

!--- Add dynamic pre-shared keys for all remote VPN routers.

crypto isakmp key cisco123 address 0.0.0.0 0.0.0.0
!
!

!--- Create the Phase 2 policy for actual data encryption.

crypto ipsec transform-set strong esp-3des esp-md5-hmac 
mode transport
!

!--- Create an IPsec profile to be applied dynamically to the !--- GRE over IPsec tunnels.

crypto ipsec profile cisco
set security-association lifetime seconds 120
set transform-set strong 
!
!
no voice hpi capture buffer
no voice hpi capture destination 
!
!

!--- Create a GRE tunnel template which is applied to !--- all the dynamically created GRE tunnels.

interface Tunnel0
ip address 192.168.1.3 255.255.255.0
no ip redirects
ip mtu 1440
ip nhrp authentication cisco123
ip nhrp map multicast dynamic
ip nhrp map 192.168.1.1 209.168.202.225
ip nhrp map multicast 209.168.202.225
ip nhrp network-id 1
ip nhrp holdtime 300
ip nhrp nhs 192.168.1.1
no ip split-horizon eigrp 90
tunnel source FastEthernet0/0
tunnel mode gre multipoint
tunnel key 0
tunnel protection ipsec profile cisco
!
interface FastEthernet0/0
ip address 209.168.202.130 255.255.255.0
duplex auto
speed auto
!
interface FastEthernet0/1
ip address 3.3.3.3 255.255.255.0
duplex auto
speed auto
!
interface BRI1/0
no ip address
shutdown
!
interface BRI1/1
no ip address
shutdown 
!
interface BRI1/2
no ip address
shutdown
!
interface BRI1/3
no ip address
shutdown
!

!--- Enable a routing protocol to send and receive !--- dynamic updates about the private networks.

router eigrp 90
network 3.3.3.0 0.0.0.255
network 192.168.1.0
no auto-summary
!
ip http server
no ip http secure-server
ip classless
ip route 0.0.0.0 0.0.0.0 209.168.202.225
ip route 2.2.2.0 255.255.255.0 Tunnel0
!
!
line con 0
exec-timeout 0 0
transport preferred all
transport output all
escape-character 27
line aux 0
transport preferred all
transport output all
line vty 0 4
login
transport preferred all
transport input all
transport output all
!
!
end

sv9-4 Spoke-Konfiguration
sv9-4#show run Building configuration... Current configuration : 1992 bytes ! version 12.3 service timestamps debug datetime msec service timestamps log datetime msec no service password-encryption ! hostname sv9-4 ! boot-start-marker boot system flash:c2691-jk9o3s-mz.123-3a.bin boot-end-marker ! enable password cisco ! no aaa new-model ip subnet-zero ! ! no ip domain lookup ! ip audit notify log ip audit po max-events 100 ip ssh break-string no ftp-server write-enable ! ! ! !--- Create an ISAKMP policy for Phase 1 negotiations. crypto isakmp policy 10 hash md5 authentication pre-share !--- Add dynamic pre-shared keys for all remote VPN routers. crypto isakmp key cisco123 address 0.0.0.0 0.0.0.0 ! ! !--- Create the Phase 2 policy for actual data encryption. crypto ipsec transform-set strong esp-3des esp-md5-hmac mode transport ! !--- Create an IPsec profile apply dynamically to the !--- GRE over IPsec tunnels. crypto ipsec profile cisco set security-association lifetime seconds 120 set transform-set strong ! ! no voice hpi capture buffer no voice hpi capture destination ! ! !--- Create a GRE tunnel template which is applied to !--- all the dynamically created GRE tunnels. interface Tunnel0 ip address 192.168.1.2 255.255.255.0 no ip redirects ip mtu 1440 ip nhrp authentication cisco123 ip nhrp map multicast dynamic ip nhrp map 192.168.1.1 209.168.202.225 ip nhrp map multicast 209.168.202.225 ip nhrp network-id 1 ip nhrp holdtime 300 ip nhrp nhs 192.168.1.1 no ip split-horizon eigrp 90 tunnel source FastEthernet0/0 tunnel mode gre multipoint tunnel key 0 tunnel protection ipsec profile cisco ! interface FastEthernet0/0 ip address 209.168.202.131 255.255.255.0 duplex auto speed auto ! interface FastEthernet0/1 ip address 2.2.2.2 255.255.255.0 duplex auto speed auto ! !--- Enable a routing protocol to send and receive !--- dynamic updates about the private networks. router eigrp 90 network 2.2.2.0 0.0.0.255 network 192.168.1.0 no auto-summary ! ip http server no ip http secure-server ip classless ip route 0.0.0.0 0.0.0.0 209.168.202.225 ! ! dial-peer cor custom ! ! line con 0 exec-timeout 0 0 transport output lat pad v120 lapb-ta mop telnet rlogin udptn ssh escape-character 27 line aux 0 transport output lat pad v120 lapb-ta mop telnet rlogin udptn ssh line vty 0 4 login transport input lat pad v120 lapb-ta mop telnet rlogin udptn ssh transport output lat pad v120 lapb-ta mop telnet rlogin udptn ssh ! ! end

sv9-4 Spoke-Konfiguration

sv9-4#show run
Building configuration...

Current configuration : 1992 bytes
!
version 12.3
service timestamps debug datetime msec
service timestamps log datetime msec
no service password-encryption
!
hostname sv9-4
!
boot-start-marker
boot system flash:c2691-jk9o3s-mz.123-3a.bin
boot-end-marker
!
enable password cisco
!
no aaa new-model
ip subnet-zero
!
!
no ip domain lookup
!
ip audit notify log
ip audit po max-events 100
ip ssh break-string 
no ftp-server write-enable
!
! 
!

!--- Create an ISAKMP policy for Phase 1 negotiations.

crypto isakmp policy 10
hash md5
authentication pre-share

!--- Add dynamic pre-shared keys for all remote VPN routers.

crypto isakmp key cisco123 address 0.0.0.0 0.0.0.0
!
!

!--- Create the Phase 2 policy for actual data encryption.

crypto ipsec transform-set strong esp-3des esp-md5-hmac 
mode transport
!

!--- Create an IPsec profile apply dynamically to the !--- GRE over IPsec tunnels.

crypto ipsec profile cisco
set security-association lifetime seconds 120
set transform-set strong 
!
!
no voice hpi capture buffer
no voice hpi capture destination 
!
!

!--- Create a GRE tunnel template which is applied to !--- all the dynamically created GRE tunnels.

interface Tunnel0
ip address 192.168.1.2 255.255.255.0
no ip redirects
ip mtu 1440
ip nhrp authentication cisco123
ip nhrp map multicast dynamic
ip nhrp map 192.168.1.1 209.168.202.225
ip nhrp map multicast 209.168.202.225
ip nhrp network-id 1
ip nhrp holdtime 300
ip nhrp nhs 192.168.1.1
no ip split-horizon eigrp 90
tunnel source FastEthernet0/0
tunnel mode gre multipoint
tunnel key 0
tunnel protection ipsec profile cisco
!
interface FastEthernet0/0
ip address 209.168.202.131 255.255.255.0
duplex auto
speed auto
!
interface FastEthernet0/1
ip address 2.2.2.2 255.255.255.0
duplex auto
speed auto
!

!--- Enable a routing protocol to send and receive !--- dynamic updates about the private networks.

router eigrp 90
network 2.2.2.0 0.0.0.255
network 192.168.1.0
no auto-summary
!
ip http server
no ip http secure-server
ip classless
ip route 0.0.0.0 0.0.0.0 209.168.202.225
!
!
dial-peer cor custom
!
!
line con 0
exec-timeout 0 0
transport output lat pad v120 lapb-ta mop telnet rlogin udptn ssh
escape-character 27
line aux 0
transport output lat pad v120 lapb-ta mop telnet rlogin udptn ssh
line vty 0 4
login
transport input lat pad v120 lapb-ta mop telnet rlogin udptn ssh
transport output lat pad v120 lapb-ta mop telnet rlogin udptn ssh
!
!
end

Überprüfung

Diese Abschnitt enthält Informationen, mit denen Sie überprüfen können, ob Ihre Konfiguration ordnungsgemäß funktioniert.

Debug-Befehle, die auf dem Hub-Router ausgeführt werden, bestätigen, dass die richtigen Parameter für die Spoke- und VPN-Client-Verbindungen übereinstimmen. Führen Sie diese Debug-Befehle aus.

Das Output Interpreter-Tool (OIT) (nur registrierte Kunden) unterstützt bestimmte show-Befehle. Verwenden Sie das OIT, um eine Analyse der show-Befehlsausgabe anzuzeigen.

Hinweis: Lesen Sie Wichtige Informationen zu Debug-Befehlen, bevor Sie Debug-Befehle verwenden.

debug crypto isakmp: Zeigt Meldungen zu IKE-Ereignissen an.
debug crypto ipsec: Zeigt Informationen zu IPsec-Ereignissen an.

sv9-2#
*Mar 13 04:38:21.187: ISAKMP (0:0): received packet from 209.168.202.130 
                      dport 500 sport 500 Global (N) NEW SA
*Mar 13 04:38:21.187: ISAKMP: local port 500, remote port 500
*Mar 13 04:38:21.187: ISAKMP: insert sa successfully sa = 63F585CC
*Mar 13 04:38:21.187: ISAKMP (0:689): Input = IKE_MESG_FROM_PEER, IKE_MM_EXCH
*Mar 13 04:38:21.187: ISAKMP (0:689): Old State = IKE_READY New State = IKE_R_MM1 

*Mar 13 04:38:21.187: ISAKMP (0:689): processing SA payload. message ID = 0
*Mar 13 04:38:21.187: ISAKMP (0:689): processing vendor id payload
*Mar 13 04:38:21.187: ISAKMP (0:689): vendor ID seems Unity/DPD but 
                       major 157 mismatch
*Mar 13 04:38:21.187: ISAKMP (0:689): vendor ID is NAT-T v3
*Mar 13 04:38:21.187: ISAKMP (0:689): processing vendor id payload
*Mar 13 04:38:21.191: ISAKMP (0:689): vendor ID seems Unity/DPD but 
                       major 123 mismatch
*Mar 13 04:38:21.191: ISAKMP (0:689): vendor ID is NAT-T v2
*Mar 13 04:38:21.191: ISAKMP: Looking for a matching key for 209.168.202.130 
                      in default
*Mar 13 04:38:21.191: ISAKMP: Looking for a matching key for 209.168.202.130 
                      in dmvpnspokes : success
*Mar 13 04:38:21.191: ISAKMP (0:689): found peer pre-shared key matching 
                      209.168.202.130
*Mar 13 04:38:21.191: ISAKMP (0:689) local preshared key found
*Mar 13 04:38:21.191: ISAKMP : Scanning profiles for xauth ... VPNclient
*Mar 13 04:38:21.191: ISAKMP (0:689) Authentication by xauth preshared
*Mar 13 04:38:21.191: ISAKMP (0:689): Checking ISAKMP transform 1 against 
                       priority 10 policy
*Mar 13 04:38:21.191: ISAKMP: encryption DES-CBC
*Mar 13 04:38:21.191: ISAKMP: hash MD5
*Mar 13 04:38:21.191: ISAKMP: default group 1
*Mar 13 04:38:21.191: ISAKMP: auth pre-share
*Mar 13 04:38:21.191: ISAKMP: life type in seconds
*Mar 13 04:38:21.191: ISAKMP: life duration (VPI) of 0x0 0x1 0x51 0x80 
*Mar 13 04:38:21.191: ISAKMP (0:689): atts are acceptable. Next payload is 0
*Mar 13 04:38:21.195: ISAKMP (0:689): processing vendor id payload
*Mar 13 04:38:21.195: ISAKMP (0:689): vendor ID seems Unity/DPD but major 
                       157 mismatch
*Mar 13 04:38:21.195: ISAKMP (0:689): vendor ID is NAT-T v3
*Mar 13 04:38:21.195: ISAKMP (0:689): processing vendor id payload
*Mar 13 04:38:21.195: ISAKMP (0:689): vendor ID seems Unity/DPD but 
                       major 123 mismatch
*Mar 13 04:38:21.195: ISAKMP (0:689): vendor ID is NAT-T v2
*Mar 13 04:38:21.195: ISAKMP (0:689): Input = IKE_MESG_INTERNAL, 
                      IKE_PROCESS_MAIN_MODE
*Mar 13 04:38:21.195: ISAKMP (0:689): Old State = IKE_R_MM1 New State = IKE_R_MM1 

*Mar 13 04:38:21.195: ISAKMP (0:689): constructed NAT-T vendor-03 ID
*Mar 13 04:38:21.195: ISAKMP (0:689): sending packet to 209.168.202.130 
                      my_port 500 peer_port 500 (R) MM_SA_SETUP
*Mar 13 04:38:21.195: ISAKMP (0:689): Input = IKE_MESG_INTERNAL, 
                      IKE_PROCESS_COMPLETE
*Mar 13 04:38:21.195: ISAKMP (0:689): Old State = IKE_R_MM1 New State = IKE_R_MM2 

*Mar 13 04:38:21.203: ISAKMP (0:689): received packet from 209.168.202.130 dport 
                      500 sport 500 Global (R) MM_SA_SETUP
*Mar 13 04:38:21.203: ISAKMP (0:689): Input = IKE_MESG_FROM_PEER, IKE_MM_EXCH
*Mar 13 04:38:21.203: ISAKMP (0:689): Old State = IKE_R_MM2 New State = IKE_R_MM3 

*Mar 13 04:38:21.203: ISAKMP (0:689): processing KE payload. message ID = 0
*Mar 13 04:38:21.211: ISAKMP (0:689): processing NONCE payload. message ID = 0
*Mar 13 04:38:21.211: ISAKMP: Looking for a matching key for 209.168.202.130 
                      in default
*Mar 13 04:38:21.211: ISAKMP: Looking for a matching key for 209.168.202.130 
                      in dmvpnspokes : success
*Mar 13 04:38:21.211: ISAKMP (0:689): found peer pre-shared key matching 
                      209.168.202.130
*Mar 13 04:38:21.211: ISAKMP: Looking for a matching key for 209.168.202.130 
                      in default
*Mar 13 04:38:21.211: ISAKMP: Looking for a matching key for 209.168.202.130 
                      in dmvpnspokes : success
*Mar 13 04:38:21.211: ISAKMP (0:689): found peer pre-shared key matching 
                      209.168.202.130
*Mar 13 04:38:21.215: ISAKMP (0:689): SKEYID state generated
*Mar 13 04:38:21.215: ISAKMP (0:689): processing vendor id payload
*Mar 13 04:38:21.215: ISAKMP (0:689): vendor ID is Unity
*Mar 13 04:38:21.215: ISAKMP (0:689): processing vendor id payload
*Mar 13 04:38:21.215: ISAKMP (0:689): vendor ID is DPD
*Mar 13 04:38:21.215: ISAKMP (0:689): processing vendor id payload
*Mar 13 04:38:21.215: ISAKMP (0:689): speaking to another IOS box!
*Mar 13 04:38:21.215: ISAKMP:received payload type 17
*Mar 13 04:38:21.215: ISAKMP:received payload type 17
*Mar 13 04:38:21.215: ISAKMP (0:689): Input = IKE_MESG_INTERNAL, 
                      IKE_PROCESS_MAIN_MODE
*Mar 13 04:38:21.215: ISAKMP (0:689): Old State = IKE_R_MM3 New State = IKE_R_MM3 

*Mar 13 04:38:21.215: ISAKMP (0:689): sending packet to 209.168.202.130 
                      my_port 500 peer_port 500 (R) MM_KEY_EXCH
*Mar 13 04:38:21.215: ISAKMP (0:689): Input = IKE_MESG_INTERNAL, 
                      IKE_PROCESS_COMPLETE
*Mar 13 04:38:21.215: ISAKMP (0:689): Old State = IKE_R_MM3 New State = IKE_R_MM4 

*Mar 13 04:38:21.227: ISAKMP (0:689): received packet from 209.168.202.130 
                      dport 500 sport 500 Global (R) MM_KEY_EXCH
*Mar 13 04:38:21.227: ISAKMP (0:689): Input = IKE_MESG_FROM_PEER, IKE_MM_EXCH
*Mar 13 04:38:21.227: ISAKMP (0:689): Old State = IKE_R_MM4 New State = IKE_R_MM5 

*Mar 13 04:38:21.227: ISAKMP (0:689): processing ID payload. message ID = 0
*Mar 13 04:38:21.227: ISAKMP (0:689): peer matches DMVPN profile
*Mar 13 04:38:21.227: ISAKMP: Looking for a matching key for 209.168.202.130 
                      in default
*Mar 13 04:38:21.227: ISAKMP: Looking for a matching key for 209.168.202.130 
                      in dmvpnspokes : success
*Mar 13 04:38:21.227: ISAKMP (0:689): Found ADDRESS key in keyring dmvpnspokes
*Mar 13 04:38:21.227: ISAKMP (0:689): processing HASH payload. message ID = 0
*Mar 13 04:38:21.227: ISAKMP (0:689): processing NOTIFY INITIAL_CONTACT protocol 1
spi 0, message ID = 0, sa = 63F585CC
*Mar 13 04:38:21.227: ISAKMP (0:689): Process initial contact,
                      bring down existing phase 1 and 2 SA's with local 
                      209.168.202.225 remote 
                      209.168.202.130 remote port 500
*Mar 13 04:38:21.227: IPSEC(key_engine): got a queue event...
*Mar 13 04:38:21.231: ISAKMP (0:689): SA has been authenticated 
                      with 209.168.202.130
*Mar 13 04:38:21.231: ISAKMP (0:689): Input = IKE_MESG_INTERNAL, 
                      IKE_PROCESS_MAIN_MODE
*Mar 13 04:38:21.231: ISAKMP (0:689): Old State = IKE_R_MM5 New State = IKE_R_MM5 

*Mar 13 04:38:21.231: ISAKMP (0:689): SA is doing pre-shared key 
                      authentication using id type ID_IPV4_ADDR
*Mar 13 04:38:21.231: ISAKMP (689): ID payload
next-payload : 8
type : 1
addr : 209.168.202.225
protocol : 17
port : 500
length : 8
*Mar 13 04:38:21.231: ISAKMP (689): Total payload length: 12
*Mar 13 04:38:21.231: ISAKMP (0:689): sending packet to 209.168.202.130 
                      my_port 500 peer_port 500 (R) MM_KEY_EXCH
*Mar 13 04:38:21.231: ISAKMP (0:689): Input = IKE_MESG_INTERNAL, 
                      IKE_PROCESS_COMPLETE
*Mar 13 04:38:21.231: ISAKMP (0:689): Old State = IKE_R_MM5 New State = 
                      IKE_P1_COMPLETE 

*Mar 13 04:38:21.231: ISAKMP (0:689): Input = IKE_MESG_INTERNAL, 
                      IKE_PHASE1_COMPLETE
*Mar 13 04:38:21.231: ISAKMP (0:689): Old State = IKE_P1_COMPLETE 
                      New State = IKE_P1_COMPLETE 

*Mar 13 04:38:21.235: ISAKMP (0:689): received packet from 
                      209.168.202.130 dport 500 sport 500 Global (R) QM_IDLE 

*Mar 13 04:38:21.235: ISAKMP: set new node -1213418274 to QM_IDLE 
*Mar 13 04:38:21.235: ISAKMP (0:689): processing HASH payload. message ID = -1213418274
*Mar 13 04:38:21.235: ISAKMP (0:689): processing SA payload. message ID = -1213418274
*Mar 13 04:38:21.235: ISAKMP (0:689): Checking IPSec proposal 1
*Mar 13 04:38:21.235: ISAKMP: transform 1, ESP_3DES
*Mar 13 04:38:21.235: ISAKMP: attributes in transform:
*Mar 13 04:38:21.235: ISAKMP: encaps is 2
*Mar 13 04:38:21.235: ISAKMP: SA life type in seconds
*Mar 13 04:38:21.235: ISAKMP: SA life duration (basic) of 120
*Mar 13 04:38:21.235: ISAKMP: SA life type in kilobytes
*Mar 13 04:38:21.235: ISAKMP: SA life duration (VPI) of 0x0 0x46 0x50 0x0 
*Mar 13 04:38:21.235: ISAKMP: authenticator is HMAC-MD5
*Mar 13 04:38:21.235: ISAKMP (0:689): atts are acceptable.
*Mar 13 04:38:21.235: IPSEC(validate_proposal_request): proposal part #1,
(key eng. msg.) INBOUND local= 209.168.202.225, remote= 209.168.202.130, 
local_proxy= 209.168.202.225/255.255.255.255/47/0 (type=1), 
remote_proxy= 209.168.202.130/255.255.255.255/47/0 (type=1),
protocol= ESP, transform= esp-3des esp-md5-hmac , 
lifedur= 0s and 0kb, 
spi= 0x0(0), conn_id= 0, keysize= 0, flags= 0x4
*Mar 13 04:38:21.239: IPSEC(kei_proxy): head = Tunnel0-head-0, 
                      map->ivrf = , kei->ivrf = 
*Mar 13 04:38:21.239: IPSEC(kei_proxy): head = Tunnel0-head-0, 
                      map->ivrf = , kei->ivrf = 
*Mar 13 04:38:21.239: ISAKMP (0:689): processing NONCE payload. 
                      message ID = -1213418274
*Mar 13 04:38:21.239: ISAKMP (0:689): processing ID payload. 
                      message ID = -1213418274
*Mar 13 04:38:21.239: ISAKMP (0:689): processing ID payload. 
                      message ID = -1213418274
*Mar 13 04:38:21.239: ISAKMP (0:689): asking for 1 spis from ipsec
*Mar 13 04:38:21.239: ISAKMP (0:689): Node -1213418274, Input = 
                      IKE_MESG_FROM_PEER, IKE_QM_EXCH
*Mar 13 04:38:21.239: ISAKMP (0:689): Old State = IKE_QM_READY 
                      New State = IKE_QM_SPI_STARVE
*Mar 13 04:38:21.239: IPSEC(key_engine): got a queue event...
*Mar 13 04:38:21.239: IPSEC(spi_response): getting spi 3759277150 for SA 
from 209.168.202.225 to 209.168.202.130 for prot 3
*Mar 13 04:38:21.239: ISAKMP (0:689): received packet from 
                      209.168.202.130 dport 500 sport 500 Global (R) QM_IDLE 

*Mar 13 04:38:21.239: ISAKMP: set new node -1392382616 to QM_IDLE 
*Mar 13 04:38:21.239: ISAKMP (0:689): processing HASH payload. 
                      message ID = -1392382616
*Mar 13 04:38:21.239: ISAKMP (0:689): processing SA payload. 
                      message ID = -1392382616
*Mar 13 04:38:21.239: ISAKMP (0:689): Checking IPSec proposal 1
*Mar 13 04:38:21.239: ISAKMP: transform 1, ESP_3DES
*Mar 13 04:38:21.239: ISAKMP: attributes in transform:
*Mar 13 04:38:21.239: ISAKMP: encaps is 2
*Mar 13 04:38:21.239: ISAKMP: SA life type in seconds
*Mar 13 04:38:21.239: ISAKMP: SA life duration (basic) of 120
*Mar 13 04:38:21.239: ISAKMP: SA life type in kilobytes
*Mar 13 04:38:21.239: ISAKMP: SA life duration (VPI) of 0x0 0x46 0x50 0x0 
*Mar 13 04:38:21.239: ISAKMP: authenticator is HMAC-MD5
*Mar 13 04:38:21.239: ISAKMP (0:689): atts are acceptable.
*Mar 13 04:38:21.243: IPSEC(validate_proposal_request): proposal part #1,
(key eng. msg.) INBOUND local= 209.168.202.225, remote= 209.168.202.130, 
local_proxy= 209.168.202.225/255.255.255.255/47/0 (type=1), 
remote_proxy= 209.168.202.130/255.255.255.255/47/0 (type=1),
protocol= ESP, transform= esp-3des esp-md5-hmac , 
lifedur= 0s and 0kb, 
spi= 0x0(0), conn_id= 0, keysize= 0, flags= 0x4
*Mar 13 04:38:21.243: IPSEC(kei_proxy): head = Tunnel0-head-0, 
                      map->ivrf = , kei->ivrf = 
*Mar 13 04:38:21.243: IPSEC(kei_proxy): head = Tunnel0-head-0,
                       map->ivrf = , kei->ivrf = 
*Mar 13 04:38:21.243: ISAKMP (0:689): processing NONCE payload. 
                      message ID = -1392382616
*Mar 13 04:38:21.243: ISAKMP (0:689): processing ID payload. 
                       message ID = -1392382616
*Mar 13 04:38:21.243: ISAKMP (0:689): processing ID payload. 
                      message ID = -1392382616
*Mar 13 04:38:21.243: ISAKMP (0:689): asking for 1 spis from ipsec
*Mar 13 04:38:21.243: ISAKMP (0:689): Node -1392382616, Input = 
                      IKE_MESG_FROM_PEER, IKE_QM_EXCH
*Mar 13 04:38:21.243: ISAKMP (0:689): Old State = IKE_QM_READY 
                      New State = IKE_QM_SPI_STARVE
*Mar 13 04:38:21.243: ISAKMP: received ke message (2/1)
*Mar 13 04:38:21.243: IPSEC(key_engine): got a queue event...
*Mar 13 04:38:21.243: IPSEC(spi_response): getting spi 1258185233 for SA 
from 209.168.202.225 to 209.168.202.130 for prot 3
*Mar 13 04:38:21.243: ISAKMP: received ke message (2/1)
*Mar 13 04:38:21.491: ISAKMP (0:689): sending packet to 
                      209.168.202.130 my_port 500 peer_port 500 (R) QM_IDLE 
*Mar 13 04:38:21.491: ISAKMP (0:689): Node -1213418274, Input = 
                      IKE_MESG_FROM_IPSEC, IKE_SPI_REPLY
*Mar 13 04:38:21.491: ISAKMP (0:689): Old State = IKE_QM_SPI_STARVE 
                      New State = IKE_QM_R_QM2
*Mar 13 04:38:21.495: ISAKMP (0:689): sending packet to 209.168.202.130 
                       my_port 500 peer_port 500 (R) QM_IDLE 
*Mar 13 04:38:21.495: ISAKMP (0:689): Node -1392382616, Input = 
                      IKE_MESG_FROM_IPSEC, IKE_SPI_REPLY
*Mar 13 04:38:21.495: ISAKMP (0:689): Old State = IKE_QM_SPI_STARVE 
                       New State = IKE_QM_R_QM2
*Mar 13 04:38:21.503: ISAKMP (0:689): received packet from 209.168.202.130 
                      dport 500 sport 500 Global (R) QM_IDLE 

*Mar 13 04:38:21.511: ISAKMP (0:689): Creating IPSec SAs
*Mar 13 04:38:21.511: inbound SA from 209.168.202.130 to 
                       209.168.202.225 (f/i) 0/ 0
                      (proxy 209.168.202.130 to 209.168.202.225)
*Mar 13 04:38:21.511: has spi 0xE012045E and conn_id 13777 and flags 4
*Mar 13 04:38:21.511: lifetime of 120 seconds
*Mar 13 04:38:21.511: lifetime of 4608000 kilobytes
*Mar 13 04:38:21.511: has client flags 0x0
*Mar 13 04:38:21.511: outbound SA from 209.168.202.225 to 
                      209.168.202.130 (f/i) 0/ 0 (proxy 209.168.202.225
                      to 209.168.202.130)
*Mar 13 04:38:21.511: has spi 1398157896 and conn_id 13778 and flags C
*Mar 13 04:38:21.511: lifetime of 120 seconds
*Mar 13 04:38:21.511: lifetime of 4608000 kilobytes
*Mar 13 04:38:21.511: has client flags 0x0
*Mar 13 04:38:21.511: ISAKMP (0:689): deleting node -1213418274 error 
                      FALSE reason "quick mode done (await)"
*Mar 13 04:38:21.511: ISAKMP (0:689): Node -1213418274, Input = 
                      IKE_MESG_FROM_PEER, IKE_QM_EXCH
*Mar 13 04:38:21.511: ISAKMP (0:689): Old State = IKE_QM_R_QM2 
                       New State = IKE_QM_PHASE2_COMPLETE
*Mar 13 04:38:21.511: IPSEC(key_engine): got a queue event...
*Mar 13 04:38:21.511: IPSEC(initialize_sas): ,
(key eng. msg.) INBOUND local= 209.168.202.225, remote= 209.168.202.130, 
local_proxy= 209.168.202.225/0.0.0.0/47/0 (type=1), 
remote_proxy= 209.168.202.130/0.0.0.0/47/0 (type=1),
protocol= ESP, transform= esp-3des esp-md5-hmac , 
lifedur= 120s and 4608000kb, 
spi= 0xE012045E(3759277150), conn_id= 13777, keysize= 0, flags= 0x4
*Mar 13 04:38:21.511: IPSEC(initialize_sas): ,
(key eng. msg.) OUTBOUND local= 209.168.202.225, remote= 209.168.202.130, 
local_proxy= 209.168.202.225/0.0.0.0/47/0 (type=1), 
remote_proxy= 209.168.202.130/0.0.0.0/47/0 (type=1),
protocol= ESP, transform= esp-3des esp-md5-hmac , 
lifedur= 120s and 4608000kb, 
spi= 0x53563248(1398157896), conn_id= 13778, keysize= 0, flags= 0xC
*Mar 13 04:38:21.511: IPSEC(kei_proxy): head = Tunnel0-head-0, 
                      map->ivrf = , kei->ivrf = 
*Mar 13 04:38:21.511: IPSEC(kei_proxy): head = Tunnel0-head-0, 
                       map->ivrf = , kei->ivrf = 
*Mar 13 04:38:21.511: IPSEC(add mtree): src 209.168.202.225, dest 
                      209.168.202.130, dest_port 0

*Mar 13 04:38:21.511: IPSEC(create_sa): sa created,
(sa) sa_dest= 209.168.202.225, sa_prot= 50, 
sa_spi= 0xE012045E(3759277150), 
sa_trans= esp-3des esp-md5-hmac , sa_conn_id= 13777
*Mar 13 04:38:21.511: IPSEC(create_sa): sa created,
(sa) sa_dest= 209.168.202.130, sa_prot= 50, 
sa_spi= 0x53563248(1398157896), 
sa_trans= esp-3des esp-md5-hmac , sa_conn_id= 13778
*Mar 13 04:38:21.511: ISAKMP (0:689): received packet from 
                      209.168.202.130 dport 500 sport 500 Global (R) QM_IDLE 

*Mar 13 04:38:21.519: ISAKMP (0:689): Creating IPSec SAs
*Mar 13 04:38:21.519: inbound SA from 209.168.202.130 to 209.168.202.225 (f/i) 0/ 0
(proxy 209.168.202.130 to 209.168.202.225)
*Mar 13 04:38:21.519: has spi 0x4AFE6211 and conn_id 13779 and flags 4
*Mar 13 04:38:21.519: lifetime of 120 seconds
*Mar 13 04:38:21.519: lifetime of 4608000 kilobytes
*Mar 13 04:38:21.519: has client flags 0x0
*Mar 13 04:38:21.519: outbound SA from 209.168.202.225 to 209.168.202.130 
                      (f/i) 0/ 0 (proxy 209.168.202.225 to 209.168.202.130)
*Mar 13 04:38:21.523: has spi -1567576395 and conn_id 13780 and flags C
*Mar 13 04:38:21.523: lifetime of 120 seconds
*Mar 13 04:38:21.523: lifetime of 4608000 kilobytes
*Mar 13 04:38:21.523: has client flags 0x0
*Mar 13 04:38:21.523: ISAKMP (0:689): deleting node -1392382616 error 
                      FALSE reason "quick mode done (await)"
*Mar 13 04:38:21.523: ISAKMP (0:689): Node -1392382616, Input = IKE_MESG_FROM_PEER, 
                      IKE_QM_EXCH
*Mar 13 04:38:21.523: ISAKMP (0:689): Old State = IKE_QM_R_QM2 New State = 
                      IKE_QM_PHASE2_COMPLETE
*Mar 13 04:38:21.523: IPSEC(key_engine): got a queue event...
*Mar 13 04:38:21.523: IPSEC(initialize_sas): ,
(key eng. msg.) INBOUND local= 209.168.202.225, remote= 209.168.202.130, 
local_proxy= 209.168.202.225/0.0.0.0/47/0 (type=1), 
remote_proxy= 209.168.202.130/0.0.0.0/47/0 (type=1),
protocol= ESP, transform= esp-3des esp-md5-hmac , 
lifedur= 120s and 4608000kb, 
spi= 0x4AFE6211(1258185233), conn_id= 13779, keysize= 0, flags= 0x4
*Mar 13 04:38:21.523: IPSEC(initialize_sas): ,
(key eng. msg.) OUTBOUND local= 209.168.202.225, remote= 209.168.202.130, 
local_proxy= 209.168.202.225/0.0.0.0/47/0 (type=1), 
remote_proxy= 209.168.202.130/0.0.0.0/47/0 (type=1),
protocol= ESP, transform= esp-3des esp-md5-hmac , 
lifedur= 120s and 4608000kb, 
spi= 0xA290AEB5(2727390901), conn_id= 13780, keysize= 0, flags= 0xC
*Mar 13 04:38:21.523: IPSEC(kei_proxy): head = Tunnel0-head-0, 
                       map->ivrf = , kei->ivrf = 
*Mar 13 04:38:21.523: IPSEC(kei_proxy): head = Tunnel0-head-0, 
                      map->ivrf = , kei->ivrf = 
*Mar 13 04:38:21.523: IPSEC(create_sa): sa created,
(sa) sa_dest= 209.168.202.225, sa_prot= 50, 
sa_spi= 0x4AFE6211(1258185233), 
sa_trans= esp-3des esp-md5-hmac , sa_conn_id= 13779
*Mar 13 04:38:21.523: IPSEC(create_sa): sa created,
(sa) sa_dest= 209.168.202.130, sa_prot= 50, 
sa_spi= 0xA290AEB5(2727390901), 
sa_trans= esp-3des esp-md5-hmac , sa_conn_id= 13780
*Mar 13 04:38:21.571: ISAKMP (0:687): purging node -114623302
*Mar 13 04:38:24.339: %DUAL-5-NBRCHANGE: IP-EIGRP(0) 90: Neighbor 
                       192.168.1.3 (Tunnel0) is up: new adjacency

Fehlerbehebung

Weitere Informationen zur Fehlerbehebung finden Sie unter IP Security Troubleshooting - Understanding and Using debug Commands (Fehlerbehebungsbefehle verstehen und verwenden).

Zugehörige Informationen

Revisionsverlauf

Überarbeitung	Veröffentlichungsdatum	Kommentare
1.0	06-Dec-2006	Erstveröffentlichung

War dieses Dokument hilfreich?

Feedback

Cisco kontaktieren

Eine Supportanfrage öffnen
(Erfordert einen Cisco Servicevertrag)