Cisco Navbar
Data Sheets

How to PDF acrobat

Table Of Contents

Data Sheet

Interactive face-to-face communications

Important Features and Benefits

Optimized Business Communications

Cisco VT Advantage Features

Video Features

Cisco VT Camera Specifications

Network Features

Minimum Computer Requirements

Minimum System Requirements

Cisco VT Camera Compliance and Safety

Service and Support

Ordering Information

Data Sheet


Cisco VT Advantage

Video Telephony Solution

Cisco® VT Advantage brings video telephony functionality to Cisco IP Phones, providing Cisco IP Phone users with the ability to add video to their communications experience. With Cisco VT Advantage, video telephony is now just a phone call.

Interactive face-to-face communications

Cisco VT Advantage is a video telephony solution comprising of the Cisco VT Advantage software application and Cisco VT Camera, a video telephony USB camera. With the Cisco VT Camera attached to a PC co-located with a Cisco IP Phone, the user can place and receive video calls on their enterprise IP telephony network. Users make calls from their Cisco IP Phones using familiar phone interfaces, but now calls are enhanced with video on a PC, without requiring any extra button-pushing or mouse-clicking.

When registered to Cisco CallManager, the Cisco VT Advantage-enabled IP Phone has the features and functionality of a full-featured IP Videophone. System administrators can provision a Cisco IP Phone with Cisco VT Advantage as they would any other Cisco IP Phone, greatly simplifying deployment and management. Enterprise customers now have a cost-effective, scalable, and visually interactive IP Communications solution.

Important Features and Benefits

Cisco VT Advantage is unique in that video telephone calls are just like regular phone calls. Call features like call forward, transfer, conference, and hold are now available with video and are all initiated through the IP phone. IP Telephony and IP Video Telephony are delivered to every employee using a unified dial plan and a common directory—over a single Cisco IP Communications infrastructure— through Cisco CallManager.

Cisco VT Advantage's video codec and bandwidth selection is completely controlled by Cisco CallManager, thus the user does not need any special experience or knowledge about video capabilities or settings. Users no longer need to predetermine if the other end of the call is a video terminal or phone. Whether the calls are audio only, or both audio and video, call completion rates increase, therefore productivity is increased.

Enabling interactive face-to-face communications at the desktop across an enterprise enhances productivity and the quality of communications, streamlines business decision-making, and improves teamwork. By reducing the need for in-person meetings, Cisco VT Advantage enables companies to save money on travel expenses and time associated with going to meetings. Cisco VT Advantage is designed to deliver enhanced modes of communication while protecting existing telephony investments.

Optimized Business Communications

Cisco VT Advantage features the latest technology and advancements available with true IP communications today. Customers can now take full advantage of their IP networks to deliver enterprise-class business communications that extends voice and video to every user in their organization. It is a dynamic solution that is designed to grow with new system capabilities. Features will keep pace with new changes through automatic software updates.

Cisco VT Advantage Features

Cisco VT Advantage is intuitively-designed, easy to use, and delivers convenient access to a host of features:

Receive-Only Mode—Users can choose to view incoming video only and not transmit video.

Video Check—Users can check their video before calls are placed or received.

Mute Video on Audio Mute Option—When users mute the audio on the phone, video is automatically paused until the audio on the IP phone is unmuted.

Video Signal Indicators—Quality of the incoming and outgoing video are graphically displayed.

Connectivity Indicator—Graphics are used to indicate the state of the connections from the PC to both its associated Cisco IP Phone and Cisco VT Camera.

Video Features

H.263 video codec—128 kbps to 1.5 Mbps bit rates

Cisco VT Camera wideband video codec—reduces PC CPU utilization on switched networks

Supported video formats (up to 30 frames per second)

352x288

320x240

176x144

160x120

Interoperable with most third party H.323 video terminals (AVVID verified Partner)

Cisco VT Camera Specifications

Enhance communications, simplify installation, and reduce administrative support requirements with the included Cisco VT Camera.

640x480 CCD (Charge-Coupled Device) sensor for improved video quality

Glass lens for improved clarity and minimal distortion

Frame rate: Up to 30 frames per second

Compatible with USB (Universal Serial Bus) 2.0 and 1.1

Privacy shade included

Versatile base: allows camera to be mounted on a flat panel display, or positioned on a flat surface

Network Features

Skinny Client Control Protocol (SCCP)

Software upgrade supported using TFTP (Trivial File Transfer Protocol) or HTTP (Hypertext Transfer Protocol)

Web-centric software install

AutoUpdate—automatic mechanism to update Cisco VT Advantage components

Minimum Computer Requirements

Microsoft Windows 2000 Professional (Service Pack 3 or later) or Windows XP Professional (Service Pack 1 or later)

1 GHz or higher Pentium III or compatible processor (Streaming SIMD Extensions support required), 1.4 GHz or higher compatible processor recommended

256 MB RAM minimum

40 MB free disk space

Video capable graphics card at 800x600x16 bit or better

USB 1.1 or 2.0

Minimum System Requirements

PC's with the Cisco VT Advantage client connect to the access ports of video-enabled Cisco IP Phones.

Cisco CallManager Release 4.0(1) Service Release 2

Cisco IP Phone 7940G rel 6.4(4)

Cisco IP Phone 7960G rel 6.0(4)

Cisco IP Phone 7970G rel 6.0(2)

Cisco VT Camera Compliance and Safety

Table 1  

Specification
Description

Regulatory Compliance

Products shall bear CE Marking indicating compliance with the 89/366/EEC and 73/23/EEC directives, which includes the following safety and EMC standards.

Safety

UL 60950

CAN/CSA-C22.2 No. 60950

EN 60950

IEC 60950

EMC

FCC Part 15 (CFR 47) Class B

ICES-003 Class B

EN55022 Class B

CISPR22 Class B

AS/NZS 3548 Class B

VCCI Class B

CNS 13438

EN55024

EN50082-1

EN61000-6-1

EN6000-3-2

EN6000-3-3


Service and Support

Cisco VT Advantage services and support reduce the cost, time, and complexity associated with implementing a converged network. Cisco and its partners have designed and deployed some of today's largest and most complex IP communications networks—meaning that they understand how to integrate an IP communications solution into any customer's network. Cisco design tools and best practices help ensure that the solution best fits specific business needs from the start, eliminating costly redesigns and downtime. Proven Cisco methods facilitate a sound implementation that will deliver the required functions and features—on time. Support services include remote network operations, network management tools to administer the converged application and network infrastructure, and technical support services.

Through these services, customers benefit from the experience gained by Cisco and its partners. Taking advantage of this valuable experience, customers can create and maintain a resilient, converged network to meet their business needs today—and in the future.

Ordering Information

Table 2 lists part numbers for Cisco VT Advantage

Table 2  

Description
Part Number

Cisco VT Advantage (software and camera included)

CVT-ADV-E1=



Toolbar

Posted: Wed May 26 22:34:34 PDT 2004
All contents are Copyright © 1992--2004 Cisco Systems, Inc. All rights reserved.
Important Notices and Privacy Statement.