Summary
Details
Symptoms
Affected Products
Software Versions and Fixes
Obtaining Fixed Software
Workarounds
Status of This Notice: FINAL
Revision History
Cisco Security Procedures
Related Information
The Cisco CSS 11500 Series Content Services Switches (CSS) running Secure Socket Layer (SSL) has a vulnerability that may allow a user to bypass SSL authentication and access protected content. Cisco has made free software available to address this vulnerability.
This security notice is posted at http://www.cisco.com/warp/public/707/cisco-sn-20050908-css.shtml.
In specific scenarios, SSL clients may not appropriately renegotiate the SSL session. When this happens and the CSS is performing SSL encryption and running vulnerable software, server verification of the client certificate can be bypassed.
This vulnerability is only applicable to situations where SSL encryption is performed on the CSS and client authentication using SSL certificates is enabled.
This vulnerability is not applicable to situations where encryption is handled at the CSS but client authentication is not used, or where the CSS is used to load balance SSL traffic but encryption is handled by servers themselves.
This vulnerability is addressed with software releases which include:
Successful exploitation of the vulnerability may result in clients accessing content without authorization.
The following products are affected by this vulnerability:
No other Cisco products are currently known to be affected by this vulnerability.
When considering software upgrades, please also consult http:// www.cisco.com/en/US/products/products_security_advisories_listing.html and any subsequent advisories to determine exposure and a complete upgrade solution.
In all cases, customers should exercise caution to be certain the devices to be upgraded contain sufficient memory and that current hardware and software configurations will continue to be supported properly by the new release. If the information is not clear, contact the Cisco Technical Assistance Center ("TAC") for assistance.
|
Train |
Release |
Image Name |
|---|---|---|
|
7.4 |
7.40 b119s |
sg0740119s.adi |
|
7.5 |
7.50 b11s |
sg0750011s.adi |
Customers with contracts should obtain upgraded software through their regular update channels. For most customers, this means that upgrades should be obtained through the Software Center on Cisco's worldwide website at http://www.cisco.com.
Customers whose Cisco products are provided or maintained through prior or existing agreement with third-party support organizations such as Cisco Partners, authorized resellers, or service providers should contact that support organization for assistance with the upgrade, which should be free of charge.
Customers who purchase direct from Cisco but who do not hold a Cisco service contract and customers who purchase through third-party vendors but are unsuccessful at obtaining fixed software through their point of sale should get their upgrades by contacting the Cisco Technical Assistance Center (TAC). TAC contacts are as follows.
Please have your product serial number available and give the URL of this notice as evidence of your entitlement to a free upgrade. Free upgrades for non-contract customers must be requested through the TAC.
Please do not contact either "psirt@cisco.com" or "security-alert@cisco.com" for software upgrades.
See http://www.cisco.com/warp/public/687/Directory/DirTAC.shtml for additional TAC contact information, including special localized telephone numbers and instructions and e-mail addresses for use in various languages.
Customers may only install and expect support for the feature sets they have purchased. By installing, downloading, accessing or otherwise using such software upgrades, customers agree to be bound by the terms of Cisco's software license terms found at http://www.cisco.com/public/sw-license-agreement.html, or as otherwise set forth at Cisco.com Downloads at http://www.cisco.com/public/sw-center/sw-usingswc.shtml.
The effectiveness of any workaround is dependent on specific customer situations such as product mix, network topology, traffic behavior, and organizational mission. Due to the variety of affected products and releases, customers should consult with their service provider or support organization to ensure any applied workaround is the most appropriate for use in the intended network before it is deployed.
In service configuration mode a user can disable the SSL session cache using the session-cache-size 0 command which will require the user to properly renegotiate all new SSL sessions.
THIS ADVISORY IS PROVIDED ON AN "AS IS" BASIS AND DOES NOT IMPLY ANY KIND OF GUARANTEE OR WARRANTY, INCLUDING THE WARRANTY OF MERCHANTABILITY. YOUR USE OF THE INFORMATION ON THE ADVISORY OR MATERIALS LINKED FROM THE ADVISORY IS AT YOUR OWN RISK. CISCO RESERVES THE RIGHT TO CHANGE OR UPDATE THIS NOTICE AT ANY TIME.
A stand-alone copy or paraphrase of the text of this security advisory that omits the distribution URL in the following section is an uncontrolled copy, and may lack important information or contain factual errors.
|
Revision 1.0 |
2005-September-08 |
Initial public release. |
Complete information on reporting security vulnerabilities in Cisco products, obtaining assistance with security incidents, and registering to receive security information from Cisco, is available on Cisco's worldwide website at http://www.cisco.com/en/US/products/products_security_vulnerability_policy.html. This includes instructions for press inquiries regarding Cisco security notices. All Cisco security advisories are available at http://www.cisco.com/go/psirt.
All contents are Copyright © 2006-2007 Cisco Systems, Inc. All rights reserved. Important Notices and Privacy Statement.
| Updated: Sep 08, 2005 | Document ID: 66280 |