June 17, 2011
THIS FIELD NOTICE IS PROVIDED ON AN "AS IS" BASIS AND DOES NOT IMPLY ANY KIND OF GUARANTEE OR WARRANTY, INCLUDING THE WARRANTY OF MERCHANTABILITY. YOUR USE OF THE INFORMATION ON THE FIELD NOTICE OR MATERIALS LINKED FROM THE FIELD NOTICE IS AT YOUR OWN RISK. CISCO RESERVES THE RIGHT TO CHANGE OR UPDATE THIS FIELD NOTICE AT ANY TIME.
Revision Date Comment 1.0 17-JUN-2011 Initial Public Release
Products Affected Comments Cisco Unified Contact Center Express / IP IVR 8.0(X) and 8.5(1) Cisco Unified Intelligence Center 8.0(X) Cisco Emergency Responder 7.1(1b), 8.0(1a), 8.5(1) Cisco Intercompany Media Engine 7.1(X), 8.0(X) and 8.5(1) Cisco Unified Communications Manager Business Edition 3000 8.5(1) Cisco Unified Communications Manager Business Edition 5000 7.1(X), 8.0(X) and 8.5(1) Cisco Unified Communications Manager Business Edition 6000 7.1(X), 8.0(X) and 8.5(1) Cisco Unified Communications Manager Enterprise 7.1(X), 8.0(X) and 8.5(1) Cisco Unified Communications Manager Session Management Edition 7.1(X), 8.0(X) and 8.5(1) Cisco Unified Presence Server 7.0(X), 8.0(X) and 8.5(1) Cisco Unified Mobility Advantage 7.1(X) Cisco Unity Connection 7.1(X), 8.0(1) and 8.5(1)
During software installation or upgrade of Cisco Unified Communications products with DVD media, the software installation process asks the user for input to perform a media check; the default selection is yes.
If the user selects yes (default) the media check fails on most systems on which the DVD media was manufactured between February, 2011 and May, 2011. The user is asked to abort the install/upgrade or proceed.
Cisco performed a DVD vendor change February 2011. During this change, we also upgraded our disk imaging system to accommodate our dual-layer DVD requirements. Cisco found that the new imaging system was incorrectly modifing the DVD volume-label, leading to checksum issues and causing the media check to fail during the application installation process.
Software installation or upgrades of Unified Communications products might fail with an alarm of:
"The media check of the image: DVD is complete, and the result is: FAIL.
The image which was just tested has errors. This could be due to a corrupt download or a bad disc. If applicable, please clean the disc and try again. If this test continues to fail, you should not continue the install."
Customers who experience this issue can perform a manual / attended install or upgrade and then choose to skip the media check. After skipping the media check, the install/upgrade will complete normally.
Note: Skipping the media check when there are actual media failures could result in installation failure and/or unexpected system performance.
For customers who want to execute the media check successfully, new DVD media is required.
Customers with a Cisco contract can order new media via Product Upgrade Tool (PUT).
Customers that do not have a contract, but are under the new product warranty period, should contact their Cisco account team to obtain a new media kit.
To follow the bug ID link below and see detailed bug information, you must be a registered customer and you must be logged in.
DDTS Description CSCtq38640 (registered customers only) Media check fails on Cisco UC software installation or upgrade
For More Information
If you require further assistance, or if you have any further questions regarding this field notice, please contact the Cisco Systems Technical Assistance Center (TAC) by one of the following methods:
Receive Email Notification For New Field Notices
Cisco Notification Service—Set up a profile to receive email updates about reliability, safety, network security, and end-of-sale issues for the Cisco products you specify.